• Aucun résultat trouvé

Numerical Simulations of Eddy Current TestingFor Plated Aluminum Parts

N/A
N/A
Info
Télécharger
Protected

Academic year: 2021

Partager "Numerical Simulations of Eddy Current TestingFor Plated Aluminum Parts"

Copied!
1
0
0

Chargement.... (Voir le texte intégral maintenant)

Texte intégral

(1)

Australian Journal of Basic and Applied Sciences

Volume 8, Issue 19, 2014, Pages 47-50

Numerical Simulations of Eddy Current Testing For Plated Aluminum Parts

Salim Bennoud, Mourad ZERGOUG

Abstract: Eddy current testing is a non-destructive inspection method applied to conductive materials. Its effects on aluminum are more effective than other materials. Modeling is a good tool for understanding and analyzing impedance responses due to flaws. In this paper, discretization by finite element method is used to solve the electromagnetic field equations in terms of magnetic vector and electric scalar potentials in order to calculate the probe impedance. Simulation by finite elements method was realized to calculate the electromagnetic energy of the interaction between coil and tested part. The real and imaginary components of the probe impedance were deduced from calculated energy that allows determining the characteristic parameters of a crack in aluminum parts.

Keywords : Non destructive testing, Eddy Current, Finite Element Method, aluminum parts, numerical simulations

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Télécharger maintenant ( PDF - 1 Page - 7.60 KB )

Documents relatifs

Parallel composition in element-by-element scheme of finite element method

1.  êà÷åñòâå ïðèìåðà íà ðèñ. Ïîäìíîæåñòâà ÿ÷ååê ñåòêè, ïîëó÷åííûå ïðè áëî÷íîì âàðèàíòå

ESMO Minimum Clinical Recommendations for diagnosis, treatment and follow-up of non-small-cell lung cancer (NSCLC)

Platinum-based chemotherapy and thoracic radiotherapy is the standard treatment for locally advanced, unresectable Stage IIIB NSCLC or medically inoperable stage IIIA NSCLC [I,

Using Mortar Element Method for Eddy Current Testing Finite Element Computations

In this paper the use of the mortar element method (MEM) is presented to take into account the coil displacement in a three-dimensional finite element simulation of eddy

Numerical Simulations of Eddy Current Testing For Plated Aluminum Parts

In this paper, discretization by finite element method is used to solve the electromagnetic field equations in terms of magnetic vector and electric scalar

Finite Volume/Element Discretization on Unstructured Meshes of the Multiscale Formulation of the Large Eddy Simulation Method and Application to Vortex Shedding

Unité de recherche INRIA Rennes : IRISA, Campus universitaire de Beaulieu - 35042 Rennes Cedex (France) Unité de recherche INRIA Rhône-Alpes : 655, avenue de l’Europe -

Analysis of Electric field spatial variability in simulations of electromagnetic waves exposure to mobile telephony base stations

Analysis of Electric field spatial variability in simulations of electromagnetic waves exposure to mobile telephony base stations.. First URSI Atlantic Radio Science Conference,

Analysis of Electric field spatial variability in simulations of electromagnetic waves exposure to mobile telephony base stations

Analysis of Electric field spatial variability in simulations of electromagnetic waves exposure to mobile telephony base stations.. EUropean Conference on Antennas and Propagation,

Experimental and numerical methodology to obtain the probability of detection in eddy current NDT method

The objectives of this paper are first, to establish a robust construc- tion of an experimental PoD curve applying the Berens Signal Response method; second, analyze the impact