IBM System/360 and System/370 Bibliography

Systems Reference Library

File No. S/360 and S/370-00 Order Number GA22-6822-16

IBM System/360 and System/370 Bibliography

This bibliography identifies and describes all literature in or related to the Systems Reference Library for the System/360, Model 25 and above, and for System/370.

Part 1 is a list of subject codes with publication types shown for each code. Part 2 is a set of publications selector charts for machines and programming systems.

These charts are quick and comprehensive guides for locating documents about specific machines or programs.

Part 3 provides abstracts of all publications in form- number sequence.

When you order the bibliography, you also get the current SRL Newsletter, Order Number GN20-0360, which should always be used with the bibliography.

Publications relating to the Model 20 are in the IBM

System/360 Model 20 Bibliography, Order Number

GA26-3565. Another publication of interest to the user

of System/360 is the Order Number GA24-3089.

Systems Reference Library

For each major IBM data processing system, a Systems Reference Library (SRL) contains all basic reference liter- ature needed to plan, program, install, and operate the system. An SRL Bibliography Supplement, Form A24- 3089, covers publications for IBM teleprocessing and data collection equipment. The Bibliography of Data Processing Techniques, Form F20-8172, lists selected IBM technique-oriented publications that are applicable to many types of systems.

Bibliography

The bibliography is always associated with the System/

360 SRL Newsletter, Form N20-0360. When you order the bibliography, you receive the SRL Newsletter. The bibliography provides publications selector charts to aid in quickly finding publications related to specific system models, input/output devices, and programming systems.

Additionally, abstracts for all current System/360 SRL publications (except those pertaining to the Model 20) are given in form number sequence.

By reviewing the contents of this bibliography, you may select items of interest for your installation and be aware of other materials that may be useful in the future.

File Numbers, Subject Codes

The cover page of each SRL manual shows the title, ab- stract, form number, and file number. The file number identifies the system or component discussed and the gen- eral subject area.

For publications associated with one or two Libraries, the prefix of the file number is the system type (e .g., S360-, 1130/1800-). When the publication is included in more than two Libraries, the component types (e.g., 1403-, 1418/1428-) are used, if applicable. In other cases

"GENL" (general) is used.

The suffix of the file number is the subject code which designates a general subject area and the suggested filing sequence. Code 15, for example, is used for all publica- tions related to physical planning specifications; code 33 appears on all publications related to IBM sort and merge programs for the system. See Part 1 for the list of subject codes and areas covered.

In the bibliography, the subject code for any publica- tion appears to the upper right of its abstract.

Sixteenth Edition (March, 1971)

This is a major revision of, and obsoletes, GA22-6822-15 and all asso- ciated SRL Newsletters. Part 1 now contains a numeric-order list of Library subject codes with areas of coverage indicated. Part 2 provides publications selector charts to aid the user in finding docu- mentation for System/360 and Systcm/370 machines and program- ming systems.

Requests for copies of IBM publications should be made to your IBM representative or to the IBM branch office serving your locality.

A co:nplete list of publications appears as an accumu- lative index in subject-code sequence in the System/360 SRL Newsletter, Form GN20-0360.

Technical Newsletters

To keep publications current, additions and other modi- fications are distributed as Technical Newsletters (TNLS).

The TNL masthead carries the file number and form number of the publication to which it applies. Also, all previously issuedTNLS are listed so that you may verify receipt of all changes.

SRL Newsletter

The System/360 SRL Newsletter, Form GN20-0360, is issued every four weeks (if changes have occurred during that period) to update the System/360, System/370 Bib- liography. All current publications are listed in subject code sequence. Each entry shows the form number and title of the publication as well as the form numbers of applicable TNLS. Obsolete publications are listed sepa- rately, with replacement form numbers (if any) indicated.

Abstracts of new publications are also included.

The SRL Newsletter gives the form number suffix so that you may verify your publications as current. Some publications have more than one current edition, since a reprint that incorporates previously distributed replace- ment pages is given a new suffix. All current editions and applicable TNLS are listed in the SRL Newsletter.

SR L Subscription Service

A direct-mail service is available to IBM system users to supply new publications, major revisions, and Technical Newsletters for a library that is formed and maintained according to a profIle of the user's interests.

To subscribe, see your local IBM representative.

IBM Programming Systems

SRL Newsletters also show the current status of pro- gramming systems available for a system. Additional data, including ordering instructions, for these and appli- cation programs are in the Catalog of Programs for IBM System/360, Form GC20-1619.

Part 1-Su bject Codes

00 General Infonnation 26 ALGOL

Bibliographies, System Summaries, Configurators

28 Report Program Generator (RPG) 01 Machine System

29 PL/I Principles of Operation, Functional

Characteristics, Operating Procedures 30 Input/Output Control System (lOCS), Data

03 Input/Output Management

Component Descriptions 31 System Service Programs

05 Magnetic Tape Units and Controls 32 Utility Programs Component Descriptions, Operator Cards

33 Sort/Merge 07 Direct Access Storage Units and Controls

Simulation, Emulation Component Descriptions, Handling Procedures 35

09 Teleprocessing Equipment 36 Control Programs

Component Descriptions 37 Automatic Testing Programs

10 Auxiliary Equipment 48 Miscellaneous Programs

Component Descriptions

50 Systems Techniques

13 Special and Custom Features 60 Application Programs

Special Feature Descriptions, Custom Feature

Descriptions 61 Type II Programs with Class "A" Maintenance 15 Physical Planning Specifications

65 Program Products - Applications Installation Manuals-Physical Planning

19 Original Equipment Manufacturers' Infonnation 70 Special Installation Services 20 Programming Systems-General 80 Installation Supplies

21 Assembler Worksheets, Coding Forms, Physical Planning

Templates 22 APL

85 Reference Summaries

23 Basic Formats, Capacities, Characteristics

24 COBOL 90 Education Literature

Course Descriptions 25 FORTRAN

95 Student Texts

Guides, Introductions, Illustrations 99 Other Supplementary Information

KWIC Index, Application Bibliographies

IBM System/360 and System/370 Bibliography 3

Part 2-Publications Selector Charts

These charts are aids for quickly finding order numbers for System/360 and System/370 publications about a specific machine or programming system, except for those per- taining to the System/360 Model 20. The machine charts are arranged according to the numbers of the system models and the I/O devices. The programming charts are arranged to show prerequisite publications and categories of

publications for a particular system. To determine the models of System/360 and/or System/370 to which an I/O device currently may attach, see

IBM System/360 Input/

Output Configura tor,

GA22-6823, and

IBM System/370 Input/Output Configurator,

GA22-7002. See

IBM System/

360 Model 20 Bibliography,

GA26-3565, for information about System/360 Model 20 machines and programming systems.

Machine System - System/360

.. - - - . - . -.. ~---.--- ----~--- -_._--~------_ .. _ - - - - -

Publication Description

System Summary System References System Physical Planning Reference Model Reference

Model Configurator

Model Operating Procedures Model Physical Planning Template I/O Reference I/O Configurator OEMI: Channel-to-Control Unit Interface OEMI: Power Control Interface OEM I: Direct Control Feature Channel-to-Channel Adapter Feature Other Features

Model 25

GA24-3510

GA24-3511

GA24-3523 GX22-6894

GA24-3512 GA24-3524 GA24-3526

MOdeI3?_L Model 40 ---- - GA22-6810 (for all modelsl GA22-6821 (for all modelsl GC22-6820 (for all modelsl GA24-3231 GA22-6881 (CPU)

GA24-3411 (Channell

GA24-3232 GA22-6813

GA24-3373 GA22-6911 GX22-6894 GX22-6894

See separate I/O chart.

GA22-6823 (for all models) GA22-6843 (for all models)

Model 44

GA22-6875

GA22-6874

GA22-6910 GX22-6914

GA22-6906 (for all models except 91)

GA22-6845 (for all models except 44) GA22-6892 (for all models)

GA24-3365 GL22-6903 GC20-1650 GL22-6904

GA24-3255 I GL22-69021 GA226900 L -_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ~_J _ _ _ _ ---J _ _ _ _ ---'- _ _ _ _ _ ~_ ____ ________ __

Machine System - System/370

4

Publication Description

System Summary System Reference System Physical Planning Reference Model Reference

Model Configurator

Model 145

GA24-3557

Model Operating Procedures GA24-3554 Model Physical Planning

Template I/O Reference I/O Configurator OEMI: Channel-to-Control Unit Interface OEMI: Power Control Interface OEMI: Direct Control Feature Other Features

GX22-7005

Model 155

r-

Model 165 GA22-7001 (for all models) GA22-7000 (for all models) GA22-7004 (for all models) GA22-6942

(CPU) GA22-6962 (Channel) GA22-6957

GX22-7006

GA22-6945

GA22-6956

GX22-7007 See separate I/O chart.

GA22-7002 (for all models) GA22-6843 (for all models I GA22-6906 (for all models I

GA22-6845 (for all modelsl

[ GA22-6955 GA22-6958

Publication Order Number ---r---

Model 50 Model 65 Model 67 Model 75 Model 85

---_._-~---

GA22-6898 GA22-6884 GA27-2719 GA22-6889 GA22-6916

GA22-6814 GA22-6887 GA27-2713 GA22-6888 GA22-6920

GA22-6908 GA27-2728 GA22-6909 GA22-6927

GX22-6914 GX226856 GX22-6905 GX22-6856 GX22-6923 GX22-6924

GA27-2717 GA27-2715 GA27-2715 GA27-2733

GA27-2716 GA27-2717

Model 91 Model 195

GA22-6907 GA22-6943

(in GA22-6944

GA22-69071

GA22-6954 GX22-6981

J.~ ____________ '--___________________________ ~_~ '---_____ ---'-_~ _ _ _ ___'__ _ _ _ _ -'

Publication Order Number

'nput /Output

- - -

Publication Order Number Publication Order Number

I/O Device or Physical I/O Device or Physical

Control Unit Reference OEMI Planning Control Unit Reference OEMI Planning

Manual Manual Template Manual Manual Template

50 Magnetic Data GA27-2725 2314 Direct Access GA26-3599 GX22-6858

Inscriber Modell Storage Facility (GC20-1649)

1017 Paper Tape Reader GA33-4500 GX22-6834 Modell, A Series,

Models 1, 2 and B Series

1018 Paper Tape Punch GA33-4500 GX22-6834 2321 Data Cell Drive GA26-5988 GA26-3674 GX22-6858

Modell Modell (GA26-3633)

1051 Control Unit GX22-6894 (GC20-1649)

Models 1, Nl GX24-3381 2401 Magnetic Tape GA22-6866 GA22-6862 GX22-6855

1052 Printer-Keyboard

.

Unit Models 1-6,8

Models 3,5,8 2415 Magnetic Tape GA22-6866 GX22-6855

Unit and Control

1052 Printer-Keyboard GA22-6877 GX22-6894 Models 1-6

Model 7

1053 Printer GX22-6894 2420 Magnetic Tape GA32-0007 GX22-6855

Unit Model 5 Models 1,4

2420 Magnetic Tape Unit GA22-6918

1231 Optical Mark GA21-9031 GX22-6860 GX22-6855

Model 7 Page Reader (GA21-9012)

2495 Tape Cartridge

Model Nl GA27-2726 GX22-6855

Reader Model 1 1255 Magnetic GA24-3542

Character Reader 2501 Card Reader GA21-9026, GX22-6834

Models 1-3 Models B l,B2

1259 Magnetic GA24-3500 GX22-6860 2520 Card Read Punch GA21-9027 GX22-6834

Character Reader Model Bl

Model 2 2520 Card Punch GA21-9027 GX22-6834

1285 Optical Reader GA24-3256 GX22-6860 Models B2,B3

Modell 2540 Card Read Punch GA21-9033 GX22-6834

1287 Optical Reader GA21-9064 GX22-6860 Modell

Models 1-4 2560 Multifunction GA26-5893 GX22-6894

1 288 Optical Page GA21-9081 GX22-6860 Card Machine

Reader Model 1 Model Al

1403 Pri nter GA24-3073 GA24-1431, GX22-6834 2671 Paper Tape Reader GA24-3388 GX22-6834

Models 2,3.7,Nl (GA24-3488) Modell

GA22-686~

•

1404 Printer GA24-1446 GA24-3356 GX22-6834 2701 Data Adapter Unit GA22-6844 GX22-6857

Model 2 Modell

1412 Magnetic GA24-1421 GX22-6860 2702 Transmission GA22-6848 GA27-3012 GX22-6857

Character Reader Control Model 1

Modell 2703 Transmission GA27-2703. GA27-3012- GX22-6857

1418 Optical GA24-1473 GX22-6860 Control Model 1

Character Reader (GA24-1452) 2803 Tape Control GA22-6866 GX22-6855

Models 1,2 (GA24-3081) Models 1,2,3

1418 Optical GA24-1473 GX22-6860 2804 Tape Control GA22-6866 GX22-6855

Character Reader GA24-3059 Models 1,2,3

Model 3 (GA24-1452) 2816 Switch ing Unit GA22-6866

(GA24-3081 ) GX22-6855

Modell

1419 Magnetic GA24-1499 GX22-6860 2820 Storage Control GA22-6895 GX22-6858

Character Reader (GA24-3342)

Modell Modell

1428 Alphameric GA24-1473 GX22-6860 2821 Control Unit GA24-3312 GX22-6834

Optical Reader (GA24-1452) Models 1-5

Models 1,2 (GA24-3081 ) 2822 Paper Tape GA24-3388 GX22-6834

1428 Alphameric GA24-1473 GX22-6860 Reader Control

Optical Reader GA24-3059 Modell

Model 3 ( GA24-1452) 2826 Paper Tape Control GA33-4500 GX22-6834

(GA24-3081 ) Models 1,2

1442 Card Read GA21-9025 GX22-6834 2835 Storage Control GA26-1589

Punch Model Nl Models 1,2

1442 Card Punch GA21-9025 GX22-6834 2840 Display Control GA27-2721 GX22-6859

Model N2 Model 2

1443 Pri nter GA24-3120 GX22-6834 2841 Storage Control GA26-5988 GX22-6858

Model Nl (GA24-3488) Modell

1445 Printer GA24-3120 GX22-6834 2844 Auxiliary Storage GA26-3599 GX22-6858

Model Nl Control

1827 Data Control GA22-6868 GX26-5508 Modell

Unit Modell (GA22-6872) 2848 Display Control GA27-2700 GX226859

2150 Console GA22-6877 GX22-6859 Models 1 -3,21,22 (GC20-1688)

Modell 3210 Console Printer- GA24-3552 GX22-7006

2250 Display Unit GA27-2701 GX22-6859 Keyboard

Modell Models 1,2

2250 Display Unit GA27-2721 GX22-6859 3211 Pri nter GA24-3543

Model 3 3215 Console Printer- GA24-3550 GX22-7006

2260 Display Station GA27-2700 GX22-6859 Keyboard

Models 1,2 (GC20-1688) Modell

2285 Display Copier GA27-2730 GX22-6859 3330 Disk Storage GA26-1592

Modell Modell

2301 Drum Storage GA22-6895 GA26-5661 GX22-6858 3420 Magnetic Tape Unit GA32-0012

Modell (GC20-1649) Models 3,5.7

2302 Disk Storage GA26-5988 GX22-6858 3803 Tape Control GA32-0012

Models 3,4 (GC20-1649) Modell

2303 Drum Storage GA26-5988 GA26-5663 GX22-6858 3811 Control Unit GA24-3543

Modell 3830 Storage Control GA26-1592

2305 Fixed-Head Storage GA26-1589 Modell

Models 1,2 7770 Audio Response GA27-2712 GA27-2706 GX22-6857

2311 Disk Storage GA26-5988 GA26-3567 GX22-6858 Unit Model 3

Drive (GC20-1649) 7772 Audio Response GA27-2711 GA27-2706 GX226857

Modell Unit Madel 3 (GA27-2710)

Publications shown in parentheses are related but not primary references_

'See IBM SRL Bibliography Supplement - Teleprocessirig, Order Number GA24-3089.

IBM System/360 and System/370 Bibliography 5

Basic Operating System

Programming Master Index

Systems Summary

.. -

GC24-3420 GC24-5041

Programming

•

^Operating

+

Programmer's Guide GC24-3372 GY24-5002 (PLM)

Management and

System Programmer Problem Programmer

Assembler

System Generation with I/O Macros Macro Definition System Generation

f---+

and Maintenance Specifications Language

..

and Maintenance

GC24-3361

GC24-5060 GY24-5000} GC24-3364 GC24-5060

GY24-5003 (PLMs)

1401/1460 Operating Guide

Timing Program Tape Labels

~

for Sort/Merge GC24-3450

GC24-3377 C24-5070

•

1070 Process

RPG Specifications Communication

-

^GC24-3387 Supervisor

-

GY24-5005 (PLM) Operating Guide

GC26-3627 Autotest

Specifications

Tape Labels

-

^GC24-3378

---

GY24-5004 (PLM)

GC24-5070

Sort/Merge Operator Messages

Program _~

..

Specifications

GC24-3321 GC24-5024

GY24-5001 (PLM)

Utility Programs Specifications

-

GC24-3409

1070 Process

..

Communication

-

Supervisor GC26-5996

6

-

ttl

s;::

"< en _~ ...

('l)

- a

^{0\ w}

_o

P"

~.

0..

"< en _~ ...

('l)

.@..

W -.J o

t::;::l

g o·

a'l '"1 P"

'"d ::r"

"<

Programming and Operating

Tape

~

^Card

Basic Tape System:

System Generation

~ and Maintenance

GC24-5061 ~

~

I---

~

~

Basic Assembler and Basic Utility Programs (Card) Specifications and Operating Guide GC28-6503 GY24-5014}

GY24-5015 (PLMs)

Input/Output 1412/1419 Specifications and Operating Guide GC24-3398 GY24-5007 (PLM)

Input/Output 1418/1428 Specifications and Operating Guide GC24-3437 GY24-5007 (PLM)

Distribution Program Specifications and Operating Guide GC21-5001 GY21-0004 (PLM)

Modular File Maintenance Program Specifications and Operating Guide GC24-5069 GY24-5096 (PLM)

Programming

Systems Summary

r---.

GC24-3420

Programming

Tape Card

Basic Tape System BASIC

.

Programmer's

Guide ~

GC24-3354

Assembler with

I/O Macro.s (Tape) ~

~ Specifications GC24-3355 GY24-5010}

GY24-5012 (PLMs)

Macro Definition

--.

Language GC24-3364

~ RPG (Tape)

Specifications ~

GC24-3418

FORTRAN Basic FORTRAN IV IV

.

^Language

GC28-6629 ~

FORTRAN IV(8K Tape) Programmer's Guide

GC28-6583 ~

Tape Labels GC24-5070

~ Master Index

GC24-5067

Tape

RPG (Card) Specifications

---+

GC24-3374 GY24-5037 (PLM)

FORTRAN IV (16K Card)

Specifications ~

GC21-9040 GY21-0001 (PLM)

Autotest Specifications GC24-3343 GY24-5011 (PLM)

Sort/Merge Programs

Specifications ~

GC24-3320 GY24-5008 (PLM)

Card and Tape Utility Programs Specifications GC24-5026

DASD Utility Programs Specifications GC24-3363

Input/Output 1231 Specifications GC24-3408 GY24-5007 (PLM)

Operating

1

^Card

Basic Tape System Operating Guide

f--.

GC24-3391

FORTRAN IV

(16K Card)

f--.

Programmer's Guide GC21-5000

,....

1401/1460 Timing Program for Sort/

,....

Merge Programs (8K) GC24-3345

f---

~ RPG (Card) Operating Guide GC24-3464

Autotest Operating Guide GC24-3417

Sort/Merge Programs Operating Guide GC24-3413

Card and Tape Utility Programs Operating Guide GC24-5027

DASD Utility Programs Operating Guide GC24-3392

Universal Character Set Utility Program Operating Guide GC24-3396

a-

Q

CIa

~o

."

..,

(Q

.., o

Q

3 3 :;0

(Q

c:

~

"tJ

"tJ

o ..,

-

Tape Operating System

Programming Systems Summary GC24-3420 Programming

•

Concepts and

~ Facilities GC24-5030

Tape Labels Data Management

Concepts

.-

..

_GC24-3430

GC24-5070 GY24-5022 (PLM)

System Control and System

~ Service Programs GC24-5034 agement and

Man

Syst em Programmer • Problem Programmer

Performance Assembler

Estimates Language

~ GC24-3414

GC24-5020 GY26-3642 (PLM)

System Generation

and Maintenance RPG Specifications

f---.

^GC26-3570

GY26-3701

GC24-5015 (PLM)

1401/1460 Timing COBOL

Program for Tape Language

-

Sort/Merge ~ Specifications

Program GC24-3433

GC24-3439 GY24-5025 (PLM)

Basic FORTRAN I V Language

r---.

GC28-6629 GY24-5032 (PLM)

PL/I Subset Reference Manual GC28-8202

~ GY33-9010}

GY33-9011 GY33-9012 (PLMs) GY33-9013

8

Programming Index

GC24-5064

Operating

System Generation and Maintenance GC24-5015

Operating Guide

GC24-5021

Supervisor and Autotest

I/O Macros Specifications

-

^GC24-5035

^r---.

^GC24-3441

GY24-5018 (PLM) GY24-5026 (PLM)

Tape Sort/Merge Program

..

Specifications GC24-3438 GY24-5016 (PLM)

COBOL Utility Programs

Programmer's

~ Specifications

-

^{Guide GC24-3465}

GC24-5025 GY24-5019 (PLM)

Basic FORTRAN IV Utility Macros

Programmer's Specifications

Guide

r---.

_GC24-5042

GY24-5045

GC24-5038 (PLM)

PL/I Programmer's OLTEP

Guide Specifications and

Uperating Guide GC24-5066

GC24-9005 GY24-5056 (PLM)

Programming

nagernent and Ma

Sy stem Programmer

Timing Estimates

~ GC24·5032

System Generation and

----

Maintenance GC24·5033

1401/1460 Timing Program for Tape

r---

SortlMerge Program GC24·3439

140111460 Timing

----

Program for Sortl Merge Program GC24-3445

1401/1440/1460 Emulator Programs Compatibility

I--- Support/3D Compatibility Support/40 GC27·6940 GY27·7164 (PLMI

System Programmer's

----

^{GC24·5073 Guide}

Planning MCAR/CCH

~ ^{for 370/155} GC24-5084

3211 Printer

----

Planning Guide GC24·5085

Planning for Impl'oved

----

BTAM Support GC30·\OO5

BTAM Planning

f----o ^{for 2790}

GC3D·l004

Planning Guide

~ ^for DOS Emulator on 3701155 GC24-5076

Emulating 14KK on

f---- 370/155.Using DOS GC33-2004

Emulating 1410nOl0

~ on 370/155 Using DOS

Concepts and

r---

Facilities GC24-5030

DASD Labels

-

^GC24-5072

'Data

~ Management Concepts GC24·3427

Introduction to

---..

Teleprocessing

GC30~2007

System Control

~ and System Service Programs GC24'5036

User's Guide

f----

GC20·1685

Tape Labels

~ GC24·5070

Single Disk

r---e-

^Only

GC24·5068

, Programming DOS Master

! ; Systems Summary ~ ^Index

: GC24·3420 GC24·5063

~

Problem Programmer

Assembler Language System Programmer'~ Supervisor and

:..., ^GC24·3414

----

^{Guide ~~} I/O Macros

GY26.3642) (PLMs)

GY26·3716 GC24·5073 GC24·5037

Basic

Telecommunications

~ Access Method GC30·5001 GY3Q·5001 (PLM)

OTAM Message

~ Control Program GC3Q·5004 GY3Q·5002 (PLM)

•

OT AM Message Processing Program Services GC3Q·5003

RPG Specification

---..

^GC26·3570

GY26·3701 (PLM)

Operating

System

----

Generation and Maintenance GC24·5033

Operating Guide Operator

~ 1---0 Communications and Messages

GC24·5022 GC24·5074

OLTEP Specifications and L..., Operating Guide

GC245066

,COBOL Language COBOL Autotest

----..

Specifications

----

Programmer's

----

Specifications

GC24·3433 Guide GC24·5062

GY24·5025 (PLM) GC24·5025 GY24·5027 (PLM)

•

COBOL Tape Sort/Merge

DASD Macros

----

^Program Specifications

GC24·5039 GC24·3438

Basic FORTRAN IV Sort/Merge Basic FORTRAN IV

f---+ ^Language Programmer's ...,... ^Program

GC28·6629

---..

Guide Specifications

GY24·5032 (PLM) GC24·5038 GC24·3444

GY24·5021 (PLM)

PL!I Subset Utility Programs

Reference Manual

GC28·8202 PL/I Programmer's ...,... Specifications

---.. GV:'>OOIO} ----

^{Guide GC24·3465} GY24·5023 (PLM)

GY33·9011 GC24·9005

GY33.9012 (PLMs) GY33·9013

Utility Macros

~

----

Specifications

GC24·5042

PL!I DASD Macros GY24·5045 (PLM)

GC24·5059

7772

----

Vocabulary File Utility Program

FORTRAN IV FORTRAN IV GC27',6924

---..

^Language

...-....

Programmer's GY27·7136 (PLM)

GC28·6515 Guide

GY28·6394 IPLM) GC28·6397

~ ^OLTEP Specifications and

FORTRAN IV FORTRAN IV I---- Operating Guide

Libraf'Y

----

Handbook for GC24·5066

Subprograms Conversion GY24·5056 (PLM)

GC28·6596 GC28·6819

Tape and Disk

ANSCOBOL ANSCOBOL Sort/Merge

~ Language

~ Programmer's I---- ^Program

Guide Specifications

GC28·6394 GC28·6398 GC28·6676

GY2B·6645 (PLM)

~

COBOL Differences Conversion Guide ANSCOBOL

f-- toANSCOBOL Tape and Disk

Conversion

'---+ Sort/Merge

GC2B·6400 Program

GC2B·6395 Timing Est.

~ ^GC28·6679

ANSSubset COBOL GC2B·6403

:e _....

III

Q.

I

.! E

III

>-

V) 0)

c:

"oC

o ...

QJ

o

Q.

:e _....

III

Q.

I

.! E

V)

~

0)

c:

"oC

o ...

o !.

Program Logic Manual Master Index GY28-6717

Catalog Management PLM

GY28-6606

PCP MFT

Introduction to Control Job Management

Progra m Logic with MFT

GY28-6605 GY27-7128

Job Management M FT Supervisor

GY28-6613 GY27-7236

PCP Supervisor GY28-6612

CO NTROL PROGRAM

t •

Sequential Access Methods Indexed Sequential Access Methods GY28-6604

GY28-6618

IBM 1288 Basic Unformatted Read System GY21-0022

AC CESS METHODS

IBM 1419 Magnetic Character Reader 1275 Optical Reader Sorter

GY21-Q012

IBM 1285, 1287 1288 Optical

Readers I - -

LY21-0013

DEVICE SUPPORT & SUPERVISION

GC28-6650

On-Line Test Executive Pragra m GY28-6651

GC28-6586

Utilities GY28-6614

GC28-6648

TESTRAN GY28-6611

TEST-UPDATE-UTILITIES

GC28-6538

Linkage Editor (E) GY28-661D Linkage Editor (F)

GY28-6667

SUPPORT

GC24-3337

~

Report Program Generator GY26-3704

GC28-6615

ALGOL GY33-8000

GC28-6538

Loader GY28-6714

GC28-8201

1

PUI (F) Compiler GY28-6800

~

PL/I Subroutine Library GY28-6801

PL/I

ASSEMBLERS, COMPILERS

GC33-2000

•

ALGOL-to·PUt Language Conversion Program GY33·7006

GC33-2001

i

COBOL·to·PL/t Language Conversion Program

GY33-7007

LANGUAGE CONVERSION PROGRAMS

GC28-662B GC28-6647

I nitial Program Loader and Nucleus Initial ization Program

GY28-6661

MVT

~

MVT Job Management

GY28-6660

!

MVT Supervisor GY28-6659

• ^t •

Remote Job Entry Program Graphic Job Processor TSO Control Program

GY30-2005 GY27-7159

GY27-7199

Conversational System/360 Job Processing Remote Job Entry

---.I fro maR emote 1130/2250

r-

GY30-2011

Subsystem GY27-7166

Basic Telecommunications

Access Method Graphics Access Method TCAM

GY30-2001 GY27-7113 GY30-2029

Basic Direct Graphics Problem

!

Queued Telecommunications

Access Method Oriented Routines Access Method

GY28-6617 GY27-711O GY30-2002

Input/Output Support Direct Access Device (OPEN/CLOSE/EOV) Space Management

GY28-6609 GY28-6607

Input/Output Supervisor GY28-6616

GC27·6918

Update Analysis Program

GY27-7106 GY28-6777

GC28-6543

•

Sort/Merge TSO Edit

GY28·6597 GY28-6773

Emulator Program to Emulate IBM 709,7090,7094,7094 II On the Model 85 GY27·7187

GC27-6909 GC27·6932

Graphic Programming ServicesJor FORTRAN IV, COBOL, PUI

GY27-7152

GC28-6514

~

Assembler (32K) GY26-3578 Assembler (64K) GY26·3700

ASSEMBLER

GC24·5029 GC28·6516

L

COBOL (E) GY24·5009 COBOL (F)

GY28-6382

GC28·6380 GC28-6516

•

American National

GC33·2002

FORTRAN·to·PL/1 Language Conversion"Progra m GY33·7000

Standard COBOL PLM GY28·6395

COBOL

GC28·6395

~

COBOL·to·USA Standard COBOL

Language Con1J'ersion Program

GY28·6397

GC28·6003 GC28-6629

~

FORTRAN IV (E) GY28·6601

GC28·6515 GC28-6639

•

FORTRAN IV (G) GY28-6638 FORTRAN tV (H) GY28·6642

Machine-Check Handler Program for System/36D Model 65 GY27-7155 Model 85 GY27-7184

TCAM Service Aids GY3O-2027

GY27·7199

•

TSO Terminal Monitor Progra m GY28-6770

~

TSO Command Processors GY28-6771 GY28-6772 GY28·6774 GY28-6775 GY28·6776

GC27·6937

~

System/360-1130 Data Transmission for

·FORTRAN GY27·7161

FORTRAN IV Syntax Checker

GY28·6831

FORTRAN

THIS PAGE INTENTIONALLY LEFT BLANK

Time Sharing System-SRLs

Programming

Command System User's Guide GC28-2001

Quick Guide for Users GX28-6400

Terminal User's Guide GC28-2017

Data Management Facilities

Assembler

1

Assembler Language GC28-2000

Assembler User Macro Instructions GC28-2004

14

,

GC28-2056

Assembler Progra mmer 's Guide GC28-2032

Linkage Editor GC28-2005

FORTRAN

IBM FORTRAN IV

GC28-2007

FORTRAN IV Library Subprograms GC28-2026

Concepts and Facilities GC28-2003

l

PUI

J

PUI Language Reference Manual ...

GC28-2045

•

PUI Library Co mputat io na I Subroutines GC28-2046

FORTRAN Programmer's Guide GC28-2025

-

Introducing TSS/360 GC28-2048

J

Master Index

GC28-2023

System Messages GC28-2037 Addendum

GC28-2043

System Programming

System Programmer's Guide GC28-2008

PUI Programmer's Guide GC28-2049

Quick Guide For System Programmer's GX28-6401

System Generation and Maintenance GC28-2010

Time Sharing Support System GC28-2066

Multiterminal Task Programming and Operation GC28-2034

Test and Maintenance User's Guide GC28-2028

Operating

--+

~

L--,..

Manager's and Administrator's Guide GC28-2024

Operator's Guide GC28-2033

Independent Utilities GC28-2038

Remote Job Entry GC28-2057

Time Sharing System-PLMs

System Logic Summary GY28-2009

System Contro I Command System • Processors System Support

Resident Command Assembler System

r----

Supervisor

f---II-

^System

f---+ f---.

Generation and

Maintenance

GY28-2012 GY28-2013 GY28-2021 GY28-2015

Task Monitor Program FORTRAN IV Independent

--+

--.

Control System

~ Compiler

--.

^Utilities

GY28-2041 GY28-2014 GY28-2019 GY28-2039

System Service Operator Task FORTRAN IV On-Line Test

~ Routines

~ and Bulk I/O

f---+

^Library

f---.

Control System

Subprograms

GY28-2018 GY28-2047 GY28-2020 GY28-2042

Dynamic PL/I Compiler Time Sharing

~ ^Loader

f---+ ^L-.t.

Support System

GY28-2031 GY28-2051 GY28-2022

Access PL/I

~ ^Methods Subroutine

r----..-

^Library

GY28-2016 GY28-2052

System Linkage

Control Blocks Editor

~

--.

GY28-2011 GY28-2030

IBM System/360 and System/370 Bibliography 15

Part 3-Abstracts

The abstracts for all System/360 publications and materials, except those pertaining to the Model 20, are listed by order number. From the abstract, the System/360 user can determine if a particular publication is applicable. The subject code number is shown at the right of the title.

S229-3169 System/360 Operating 99 System - Handbook FE

Handbook

A handbook is a summary of basic maintenance documentation. It is the information on a system thatthe customer engineer requires at the system console to isolate a malfunction to a specific unit or function. The Handbook contains: general system reference data, including instruction for- mats; operation codes; code translation charts;

interface information; error indication data; ref- erence to diagnostic programs; etc. (198 pages)

G232·0001 IBM 2420 Model 7 Tape 05 Drive Operator's Guide Card

This reference guide card provides a convenient reference to the procedures for loading, unload- ing, and inserting the tape reel in cartridges. The procedures to follow for various problems are also included. (1 page)

G 32()' 0956 ATS/360 Terminal Operator's Quick

Reference Guide

60

This guide is intended to facilitate rapid instruc- tion for the computer center operator using System/360 ATS/DOS. It is essentially based on information appearing in the ATS/DOS Computer Center Operator's Manual (GH20-0511).

This reference guide will be updated from time to time to reflect system changes and improve- ments; however, the reader should remember that the basic program documentations (which includes GH20-05U) is the authoritative source of the pro- gram information and will first reflect such changes.

(76 pages)

G32()'0958 ATS/360-DOS Computer Operator's Quick Reference Guide

60

This guide contains step-by-step procedure intended to facilitate rapid instruction of the computer cen- ter operator using System/360 Administrative Terminal System DOS (ATS/DOS). It is essentially based on information appearing in the ATS:DOS Computer Center Operator's Manual (GH20-0511).

(39 pages) 16

G32()'1002 ATS/360- OS Computer Operator's Quick Reference Guide Manual

60

This guide is intended to provide the computer center operator using System/360 ATS/OS with a quick reference to operational commands. It is not an instruction manual. The table of contents is organized by sequence of operations. An index is provided at the back of the guide. (40 pages)

GA19·0004 IBM 1219 Reader Sorter Model 32 IBM 1419 Magnetic Character Reader Model 32; For IBM World Trade Use Only

03

This publication contains detailed information about the keys, lights, switches, mechanical fea- tures, and special features of the IBM 1219 Reader Sortcr Model 32 and the IBM 1419 Mag- netic Character Reader Model 32.

On-line and off-line data-flow and operating theory are fully discussed, with step-by-step pro- ccdures for each reader operation. Programming notes and error-correction routines are also cov- ered in detail. It should be noted that, in the areas of on-line opcration, error-recovery, and pro- gramming notes, this manual refers to the 1401 attachment only.

For additional information, readers are referred to the following publications: IBM 1401/1460 Miscellaneous Input/Output Instructions, Order Number GA24-3068; and IBM 1419 Magnetic Character Reader with IBM 1410 System, Order Number GA22-05 36. For information concerning the attachment of the IBM 1219/1419 Model 32 to the IBM System/360 Models 30 or 40, readers are referred to IBM 1419 Model 32 Attached to IBM System/360 Model 30 or 40, Order Number GAI9-0023. (60 pages)

GA19·0010 IBM 3944 Dial Terminal 09 Unit For World Trade Use Only

The IBM 3944 Dial Terminal Unit is designed to be uscd as an input device to Audio Response Units through a telephone network.

The IBM 7772 Audio Response Unit is an input/output unit of the IBM System/360 Models 30,40,50,65, and 75, interfacing the computer and a telephone network. The Audio Response Unit provides, under program control, composed messages of spoken words in response to digital inquiries or input messages. Except for the use of digital language from the calling to the called line, communication between remote inquiry terminals and the Audio Response Unit is conducted in the same manner as an ordinary telephone call.

(4 pages)

GA19·0019 IBM System/360 Model 13 30, 1401/1440/1460 Compatibility Feature Inverted Print Edit and Sterling Sub-Features

This publication is a supplement to the source manual entitled IBM System/360 Model 30,1401/

1440/1460 Compatibility Feature, Order Number GA24-3255, and should be read in conjunction with it. The information contained herein is intended pri- marily for users in World Trade sterling countries.

This publication is limited to a description of (1) the use of the Comma and Decimal Point In- version Sub-Feature; and (2) how sterling-currency applications can be processed with the Sterling Currency Sub-Feature without conversion of existing 1400-series programs.

The reader is also referred to the IBM System/

360 Model 30, Functional Characteristics, Order Number GA24-3231, for a description of the capa- bilities, functions, and operational characteristics of the System/360 Model 30; and to Reference Manual, IBM 1401 Data Processing System Sterling Cur- rency Features, Order Number UK31401-0.

(2 pages)

GA19·0023 IBM 1419 Model 32 03 Attached to IBM System/360 Model 25, 30, 40, 50, or 65 Systems Reference Library Manual

This publication is a supplement to IBM 1219 Reader Sorter. Model 32-IBM 1419 Magnetic Character Reader, Model 32, Order Number GAI9- 0004 and should be read in conjunction with it.

This pUblication is limited to certain additions to GAI9-0004. Additional operating information relating to Power On-Power Off, Channel Line Termination and Sort Mode Selection is provided.

GA19-0036 Paper and Print Quality 03 Requirements for IBM 1270 and 1275 Optical Reader Sorters

This publication describes the quality of paper and print required for documents that are to be read by the IBM 1270 and 1275 Optical Reader Sorters.

The manual is intended for those responsible for providing the documents and for those who plan and maintain the optical character recognition system.

The following topics are dealt with:

1. The mechanical and optical characteristics desired of the paper.

2. The sizes and conditions of documents.

3. The quality of the printing, and the printing devices that can be used to obtain this quality.

4. The procedures for manual, as well as ma- chine handling of the documents.

For information on the 1270 and 1275 Optical Reader Sorters, refer to Systems Reference Library (SRL) IBM System/360 Component Description- IBM 1270 Optical Reader Sorter, Order Number GA19-0035 and IBM System/360 Component Description - IBM 1275 Optical Reader Sorter, Order Number GAI9-0034. For information on the design of documents, refer to SRL Form-Design Considerations - System Printers, Order Number GA24-3488.

For information on the IBM printing devices dealt with in the manual, refer to SRL IBM 1403 Printer Component Description, Order Number GA24-3073 and to the booklet/BM Typing Instruc- tions for Optical Character Recognition. (38 pages)

GA19-0038 IBM System/370 Model 155 Installation Information Physical Planning IBM World Trade 50-Hertz Requirements

15

This manual contains provisional physical infor- mation for installing the IBM System/370 Model 155, including floor planning and electrical, en- vironmental, and structural requirements. It de- scribes the physical characteristics of each unit and their effect on installation requirements.

This pUblication is intended for IBM World Trade usage by installation planners and it is as- sumed that the reader has a background knowledge of data processing equipment and installation planning techniques. (16 pages)

GA19-0039 IBM System/370 Model 165 Installation Information Physical Planning IBM World Trade 50-Hertz Requirements

15

This manual contains provisional physical infor- mation for installing the IBM System/370 Model 165, including floor planning and electrical, en- vironmental, and structural requirements. It de- scribes the physical characteristics of each unit and their effect on installation requirements.

This pUblication is intended for IBM World Trade usage by installation planners and it is as- sumed that the reader has a background knowledge of data processing equipment and installation planning techniques. (24 pages)

GA21·9025 IBM 1442 N1 and N2 Component Description and Operating Procedures

03

This publication describes the operating principles, machine features, and operating procedures of the IBM 1442 Nl Card Read Punch and the IBM 1442 N2 Card Punch. Also, it discusses in general the op- eration of these devices with IBM System/360.

For further information about these machines as they are used with System/360, refer to IBM System/360 Principles of Operation, Order Number GA22-6821, and other publications listed in IBM System/360 Bibliography, Order Number GA22- 6822_ (15 pages)

GA21·9026 IBM 2501 Models B1 and B2 Component Description and Operating Procedures

03

This publication describes the operation of the IBM 2501 Card Reader Models Bl and B2 with IBM System/360 Models 30 and higher. Operating principles, system communication, and operating.

procedures are presented.

This manual assumes that the reader is familiar with the operation of the IBM System/360, as de- scribed in the SRL pUblication, IBM System/360 Principles of Operation, Order Number GA22-6821.

(16 pages)

GA21·9027 IBM 2520-B1, B2, and B3 Component Description and Operating Procedures

03

This pUblication describes the IBM 2520 Card Read Punch Model Bl and the IBM 2520 Card Punch Models B2 and B3 with IBM System/360 Models 30 and above. Included are discussions of machine features and operating principles and pro- cedures. (32 pages)

GA21·9031 IBM System/360

Component Description and Operating Procedures: 1231·N1

03

This publication is a reference manual for the IBM 1231 Optical Mark Page Reader, which serves as an input device (reading handwritten marks from sheets of paper) for IBM System/360 Models 25, 30, 40, and 50. The manual provides reference information about the 1231-Nl, explaining 1231- Nl operation and its interaction with the system to which it is attached.

The principle audience for this publication will be IBM System/360 programmers, system analysts, supervisors, and operators. Others who will use the manual arc form designers, forms manufacturers, and input document printers.

Programmers, systems analysts, and supervisors using this manual will need to be familiar with the system to which the 1231-Nl is attached. For the form numbers and names of other publications describing the IBM System/360, see IBM System/

360 Bibliography, Order Number GA22-6822.

(40 pages)

GA21·9033 IBM System/360 Compo- nent Description and Operating Procedures IBM 2540 Card Read Punch

03

This publication explains the operating principles, procedures, and controls of the IBM 2540 Card Read Punch. Special features for the 2540 are also discussed.

Refer ro the IBM 2821 Control Unit, Form A24-3312, for information concerning the com- mands, status and sense indicators, and other pro- gramming considerations that affect the 2540.

For similar information about an IBM 2540 at- tached to an IBM System/360 through the inte- grated 2540 attachment feature, refer to IBM System/360 Model 25 Functional Characteristics, Order Number GA24-3510

Additional information about the operation of the 2540 with various models of the System/360 is available in the appropriate System/360 oper- ator's guides (see the IBM System/360 Bibliog- raphy, Order Number GA22-6822, for the order numbers of the required manual). (16 pages)

GA21-9050 IBM 2956 Optical Mark/

Hole Reader Models 2 and 3 c..,- ponent Description and Operating Procedures Systems Reference Library Manual

03

---

This publication describes thc IBM 2956 Optical Mark/Hole Reader and its operation with the IBM 2740 Communications Terminal. Included are descriptions of the 2956 operating principles, input forms design considerations, throughput timing, operator controls, and operating procedures.

Familiarity with 2740 operation, as described in the SRL manual. IBM 2740 COMMUNICA- TIONS TERMINAL, Order Number GA24-3403, is prerequisite to the use of this publication. (24 pages)

GA21·9064 IBM 1287 Optical Reader Component Description and Operating Procedures

03

This publication describes the IBM 1287 Optical Reader and its features, operating principles and procedures, and operations with IBM System/360.

The manual also contains detailed specifications for input documents and tapes and for input data quality.

For other publications that describe IBM System/360, see the SRL manual IBM System/360 Bibliography, Order Number GA22-6822.

For more information about proper numeric handwriting for 1287 input, see Handwriting Numbers and Symbols for the IBM Optical Reader, Order Number SR29-1280, and the handwriting practice sheet, Order Number SR29-1281.F

For more detailed programming information, see one or more of these SRL manuals as appropriate:

IBM System/360 Basic Programming Support Specifications, Assembler with Input/Output Macros (8K Tape), Order Number GC24-3355.

IBM System/360 Basic Programming Support, Programmer's Guide (8K Tape), Order Num- ber GC24-3354.

IBM System/360 Basic Operating System Specifications, Assembler with I/O Macros, Order Number GC24-3361.

IBM System/360 Basic Operating System Pro- grammer's Guide, Order Number GC24-3372.

IBM System/360 Disk Operating System, Ex- tended Supervisor and Input/Output Macros, Order Number GC24-5037.

IBM System/360 and System/370 Bibliography 17