IBM System/360

Systems Reference Library

IBM System/360

Input/Output Configurator

This configurator presents the various input/output equipment for the System/360, Models 30 to 75. This input/output equip- ment is classified according to types. Each type appears on a separate page.

Page Disk and Drum Storages and Storage Controls . 3 Magnetic Tape Units and Controls . 5 Card Input/Output, Printers, Paper Tape Input/Output,

and Magnetic and Optical Character Readers 7

Display Units and Controls 9

Audio Communications 11

Data Communications and Acquisition . 13

Process Control . 15

File No. S360-00

Form A22-6823-1

Form A22-6823-0.

Copies of this and other IBM publications can be obtained through IBM Branch Offices Address comments concerning the contents of this publication to:

IBM Corporation, Customer Manuals, Dept. B98, PO Box 390, Poughkeepsie, N. Y. 12602

III3 System/360 Input/Output

Configurator for Disk and Drum Storages, Storage Controls

(Applicable for Models 30-75 unless otherwise specified)

2841 Storage Control

Features 2-Channel Switch Additional Storage (for 2302-3,4) Scan

Record Overflow

7320 Attachment 2302 Attachment 2321 Attachment

(Models 50-75 Only) 2820 Control Unit Feature:

2-Channel Switch

2860-1 Max of 2 2820's 2860-2 Max of 3 2820's 2860-3 Max of 4 2820's

For Model 50 Max of One 2820 on High-Speed Channel Only

(Except Models 30 and 44) 2314 Direct Access Storage (Uses 2316 Disk Pack)

Feature 2-Channel Switch

2311 Disk Storage Drive

- - (Uses 1316 Disk Pack)

(Except Mode I 44) 2302-3,4 Disk Storage

(Except Model 44) 7320 Drum Storage

(Except Model 44) _ 2321-1 Data Cell Drive

-- ^{Parallel Drum 2301}

*

Control feature or adapter required in related control unit

@ Selector Channel

Printed in U. S. A.

File No. S360-00 Form A22-6823-1

3

m System/3S0 Input/Output

Configurator for Magnetic Tape Units and Controls

(Applicable for Models 30-75 unless othelWise specified)

~CD~---~

~CD

2403 Magnetic Tope Unit and Control (1 Drive + Control for 8) Mod Drive Speed

1 30 KB/sec 2 60 KB/sec 3 90 KB/sec

Features 7-Track Compatibility Data Conversion 16-Drive Addressing

2803 Tape Control Features 7- Track Compatibil ity Data Conversion 16-Drive Addressing

T 2402 Magnetic Tape Unit (Double Drive) Mod1 30 KB/sec Mod2 60 KB/sec Mod3 90 KB/sec

Features 7 -Track Features * 9-Track Feature

2401 Magnetic Tape Unit (Single Drive) M~l 30 KB/sec Mod2 60 KB/sec Mod3 90 KB/sec

Features 7-Track Feature * 9- Track Feature

2816-1 Switching Unit penmits switching of 4 or 8 drives to 2 channels (expandable to 3 or 4 channels).

With 16-Drive Addressing feature and a second 2816, 4,8, 12 ar 16 Drives can be switched between 2, 3 or 4 channels.

--

2401 or 2402 Magnetic Tape Unit

2401 or 2402 Magnetic Tape Unit

(Model 30 Only) 2415 Magnetic Tape Unit

and Control 15 KB/sec Model 1- Two drives and single channel control Model 2- Four drives and single channel control Mode I 3- Six drives and single channel control

Features Data Conversion 7-Track Compatibility

File No. S360-00 Form A22-6823-1

2402 Magnetic Tape Unit (Double Drive Mad1 30 KB/sec Mod2 60 KB/sec Mad3 90 KB/sec

2401 Magnetic Tape Unit (Single Drive) Mad1 30 KB/sec Mad2 60 KB/sec Mad3 90 KB/sec

r - - - - - - - - - - - - - - - - - - - - - - - - - ,

: Off-Line Operation Only

~0

~CD

®CD

®0,

2404 Magnetic Tape Unit and Control (1 Drive + Control for 8) 2 Ch Rd while Wr Orl Unit

M~ r-,

1 :

2 I

3 I

2804 Tape Control I I

I I

L_...J

2 Ch Rd while Wr Orl Unit Features 7-Track Compatibility Data Canversion

2802 Hypertape Control ~ (Except Model 44)

2802 Hypertape Control Features 16-Drive Addressing

* Control feature or adapter required in related control unit

®

Multiplexor Channel

CD

Selector Channel

Features 7-Track Feature * 9-Track Feature

Features 7-Track Feature *

9-Track Feature

I

I I

I

I

I

I I I

Tape Drive 729- II/IV/V/VI (at 556 bpi)

or

2401/2402 - 1, 2, 3 2403 - 1, 2

(with 9- Track Read/Write Head)

7634 7404

-

^{Graphic Graphic}

Control Output

Unit Unit

2402 Magnetic Tape Unit (Double Drive) Mod 1 30 KB/sec Mod 2 60 KB/sec Mod 3 90 KB/sec

2401 Magnetic Tape Unit (Single Drive) Mod 1 30 KB/sec Mod 2 60 KB/sec

Mod 3 90 KB/sec

L ____________________ _

Features 7-Track Feature*

9-Track Feature Simultaneaus Read-whi Ie-write

Features 7-Track Feature*

9-Track Feature S i mu I taneous Read-whi Ie-write

Note: The 2404 Magnetic Tape Unit and Contral and the 2804 Tape Control can attach to two channels to overlap a read operation with a write operation.

2402 Magnetic Tape Unit (Double Drive) Mod 1 30 KB/sec Mod 2 60 KB/sec Mod 3 90 KB/sec

Features 7- Track Feature*

9- Track Feature Simultaneous Read-whi Ie-write

2401 Magnetic Tape Unit (Single Drive) Mod 1 30 KB/sec Mod 2 60 KB/sec Mod 3 90 KB/sec

Features"

7- Track Feature*

9- Track Feature Simultaneous Read-whi Ie-write 2816-2 Switching Unit permits switching of 4 or 8 drives to 2 channels (expandable to 3 or 4 channels).

With 16-Drive Addressing feature and a second 2816, 4, 8, 12 or 16 Drives can be switched between 2, 3 or 4 channel s.

i-" --

f-- ..

, ;-- ..

1-- ..

--

T 2802 Connects as many as eight 7340-3's 7340-3 Hypertape

Feature Automatic Cartridge

Loader

7340-3 Hypertape

7340-3 Hypertape

BI System/360 Input/Output

Configurator for Card Input/Output, Printers,

File No. S360-00 Form A22-6823-1

Paper Tape Input/Output, and Magnetic and Optical Character Readers

(Applicable for Models 30-75 unless otherwise specified)

1442-N2 Card Punch

1403-2 Printer

@0

(Includes Control)

(600 LPM Chain) Features 91 to 270 CPM - Punch

Aux Ribbon Feeding

Features Numeri ca I Print

Card Image Selective Tape Listing

Universal Character Set Interchangeable Chain

Cartridge Adapter 1442-Nl Card Read Punch

@@f-

(Includes Control)

400 CPM - Read 1403-3 Printer

91 to 270 CPM - Punch (1100 LPM Train)

Features

t-

Card Image Features

Selective Tape Listing * Universal Character Set

1443-Nl Printer /1416 Interchangeable rl

@@f-

Train Cartridge Adapter

(Includes Cantrol) Features 24 Additianal print

positions 1403-7 Printer

Selective Character Set (600 LPM Chain)

t-

Features

Aux Ribbon Feeding Interchangeable Chain

@@

2821 Contral Unit Cartridge Adapter

Modell - One 2540 and One Printer *

Model 2 - One Printer *

1403-Nl Printer Model 3 - Two Printers *--

(with Third Printer Control--

t--

(1100 LPM Train) Three Printers*)

Features Mode I 4 - One 2540 and One Selective Tape Listing *

1404 Printer **

Model 5 - One 2540 and Two Universal Character Set Printers* --(with Third 1.1416 Interchangeable rl Printer Control-- Three Train Cartridge Adapter Printers *)

* 1403 Models 2,3,7, or Nl (Models 30,40,50 only)

** Models 30, 40, or 50 1404-2 Bill Feed Printer only

t-

Interchangeable Chain ^Features Cartridge Adapter Read Compare*

2540 Card Read Punch 1000 CPM - Read 300 CPM - Punch Features 51-Column Inter-

changeable Rd Feed Punch Feed Read * (Models 30 - 50 only)

f-

Paper Tape Reader ²⁸²² 2671-1 Control Unit Paper Tape Reader

-

Features

Supply Option Take-up Option Center Roll Feeding

*Cantrol feature or adapter required in related control unit

** Not on System/360 Mode I 44

@

Multiplexor Channel

o

Selector Channel

Printed in U. S. A.

@/-

@r-

@~

@@~

@I-

@0i-

(Models 30 and 40 only) 1419 Magnetic Character Reader

Features Multiple Column Control Electronic Accumulator and

Sequence Number Se If-Checking Number

Modulus 10 or 11 51-Column Card Sorting Endorser

Endorse Only Batch Numbering Split Field

Dash Symbol Transmission (Model 30 only) 1412 Magnetic Character Reader

Features Multiple Column Se lect Short Suppress

Electronic Accumulator and Sequence Checking Self-Checking Number Modulus 10 or 11 Document Caunter Endorser

Dash Symbol Transmissian

(Model 30 Only)

1418-1, 20r 3 Optical Character Reader

Features Mark Reading Station Slanted Mark Reading Station Read Station - Additional

.093 "or. 114" Characters

{Model 30 only}

1231-Nl Optical Mark Page Reader

Features Master Mark

(Made I 30 on Iy) 1428-1,2, or 3 Alphameric

Character Reader Features Mark Reading Station Read Station Additional Slanted Mark Reading Station

(Mode Is 30 only) 1445-N 1 Printer{MICR)

Features Selective Character Set

(Mode Is 30 and 40 only)

@f-

1285 Optical Reader Feature NCR Optical Type Font

2501 Card Reader

@@l-

Mode I B 1 - 600 CPM - Read Model B2 - 1,000 CPM - Read

Features Card Image

Compatibi lity Attachment

@0f-

2520 Card Read Punch Model Bl - 500 CPM - Read

and Punch Features Card Image

Compatibility Attachment

2520 Card Punch

@

^S Mode I B2 - 500 CPM - Punch Mode I B3 - 300 CPM - Punch

Features Card Image

Compatibi I ity Attachment

7

BI System/360 Input/Output

Configurator for Display Units and Controls

(Applicable for M~els 30-75 unless otherwise specified)

2848 Display Control Unit Mode I 1 - 240 Characters/

2260 Display Mode I 2 - 480 Characters/

2260 Display Mode I 3 - 960 Characters/

2260 Display Features

Display Adapters - Control for two

2260's.

1 - - --- r - - - -,

~

!

Expansion Units -

Mode I 1 - Attach up to 24, 2260's.

1

I ^~I ____ --,

Model 2 - Attach up to 16, 2260's.

Mode I 3 - Attach up to 8, 2260's.

1053 Adapter (Models 1,2, and 3)

2840-1

2260 Display Unit Features Alphameric Keyboard

Numeric Keyboard

Display Control Unit

t----,-,--"T'"-"T'"- ""T"--'--"'T"-"

• • •••

Features Buffer 8K

Multiplex two 2250-2{3 max) Multiplex six 2250-2

r--_ ^T

r-

2250-1 Display Unit (Incl udes Control)

Features Buffer 4K Buffer 8K Character Generator Alphameric Keyboard Program Function Key-

board Light Pen

(Models 65 and 75 only) 2150 Console (Includes 1052 Adapter) Operator Control Panel

(Max 2)

-

(Except Models 30, 44, and 75)

/ - - - - -

- -

...

I 1052 Adapter "\

@CD~ Located in CPU when I-- M S \ 1052 is not used with

,~~ ~n~le _ _ _ _

2250-2 Display Unit Features A/N Keyboard Light Pen Program Function

Keyboard

I

(Except Model 44) 2280 Film Recorder 2281 Fi 1m Scanner 2282 Fi 1m Recorder/Scanner

1052-7 Keyboard Printer Requires direct console attachment feature

1052-7 Keyboard Printer Requires direct console attachment feature

*

For attachment of the 1052 to Model 30, see IBM System/360 Model 30 Configurator, Form A24-3232.

@

Multiplexor Channel

CD

Selector Channel

1053 Printer Features Pin Feed Platen Forms Feed Control

Form A22-6823-1

_ System/360 Input/Output

Configurator for Audio Communications

(Applicable for Models 30-75 unless otherwise specified)

IBM 7772 AUDIO RESPONSE UNIT Model 3

Number of I/O Lines I/O Line Expander * I/O Line Frome * *

(Except Mode I 44)

4 6

* One I/O Line Expander is required for each increment of 2 I/O lines in excess of the fir.>t 2

An I/O Line Frame is required with more than one I/O Line Expander

@11----f---1i

Vocabulary: Response composed from vocabulary stored in random access storage devices as a digitally-coded voice

(Except Mode I 44)

IBM 7770 AUDIO RESPONSE UNIT Model 3

Number of I/O Lines 12 16 20 24 28 32 36 40 44 48

I/O Line Expander * 4 6 7 10 11

I/O Line Panel **

4 4

I/O Line Frame \]

*

One I/O line expander is required for each increment of 4 I/O lines in excess of the first 4 One I/O line panel is required for each increment of 8, or portion thereof, I/O lines in excess of 8

\] Increasing the number of I/O lines beyond a total of 16 lines requires one I/O line frame

Vocabulary -- Number of Words

@:I---+--I:

³²

I

⁴⁸

I

⁶⁴

I

⁸⁰

I

⁹⁶

I

¹¹²

I

¹²⁸

@ Multiplexor Channel

Printed in U. S.A.

File No. S360-00 Form A22-6823-1

11

m System/360 Input/Output

File No. S360-00 Form A22-6823-1

Configurator for Data Communications and Acquisition

(Applicable for Models 30-75 unless otherwise specified)

IBM 2701 Data Adapter Unit

Transmission

@CD

Interface

f--

^I Transmission Control ^{f-- --I} .A.dapter

I I ^{I I}

I I ^{(XIC) (X A)}

Expansion Feature

(XIC)

~- ^{- -~}

(XA)

I ^I

I

Expansion Feature

~-

^-

-i

I (XIC) I I (XA)

I

Expansion Feature

I

,

(XIC)

1-- ^--

^{- - I} _(XA)

~-- ^--

^I--

--1 ^,

t

t

Must use second channel interface feature

IBM 2702 Transmission Control

@I---t---t

r--

Two Processor

I - - I

I

Switch Feature

31-Line Expansion Feature

15

I

1 ....

31

Terminal Attachments IBM 1009 Data Transmission Unit IBM 1013 Card Transmission Terminal IBM 7701 Magnetic Tape Transmission Terminal IBM 7702 Magnetic Tape Transmission Terminal IBM 7710 Data Communication Unit

IBM 7711 Data Communication Unit IBM 7740 Communication Control System IBM 7750 Programmed Transmission Control IBM System/360 with similarly equipped 2701's IBM 1030 Data Collection System

IBM 1050 Data Communication System IBM 1060 Data Communication System IBM 1070 Process Communication System AT&T 83B2 Type Selective Calling Terminals Western Union Plan 115A Outstations Common Carrier TWX Stations (8-Level code) European Teleprinters (WTC attachment) Parallel Data Devices

Contact Sense Terminals Contact Operate Terminals Serial Synchronous Terminals

I

I .----1 I

I

I I

Terminal Attachments IBM 1030 Data Collection System IBM 1050 Data Communication System IBM 1060 Data Communication System IBM 1070 Process Communication System AT&T 83B2 Type Selective Calling Terminals Western Union Plan 115A Outstations Common Carrier TWX Stations (8-Level) European Teleprinters (WTC Use)

I I

I I

L ______________________

^~

For more detailed configurations on the 2701 and 2702, see the IBM System/360 Data Communications and Acquisition Configurator, Form A22-6824.

@

Multiplexor Channel

CD

Se lector Channe I

BI System/360 Input/Output Configurator for Process Control

(Applicable for Mcxlels 30-75 unless otherwise specified)

IBM 1827 Data

I

Control Unit

Digital Output

Digital Adapter

Analog

Output

1

Basic

Digital Input

Digital Adapter

Input

I

Basic

J

Pulse Counter Adapter

t-

* System/360 Models:

30

40 Analog

44 Input

50 Basic

Externa I Sync:

Digital Input

-

---1

External Sync:

Digital and Analog Output

IBM 1826 Adapter Unit Models 1, 2

Digital Output Adapter

Digital Pulse

Input Counter

Adapter Adapter

1 _I

IBM 1828 Enclosure Models 1,2

I I

MPX Terminal 1851 -lor 2

I

Ana log Input 1856-1

J

1851 -lor 2

I

^Terminal

l

MPX Terminal I

I

1851-2

I

^1856-2

I

MPX Terminal Analog Input Terminal

- ^J _l

MPX Terminal ^1851-1

^I

I

^1851-1 1854 Hybrid

l

MPX Terminal

--

_Input

Terminal

~

External Sync:

- I

Analog Input

File No. S360-00 Form A22-6823-1

For more detailed configurators concerning the IBM 1827 with the IBM 1828 and 1826, see the System/360 with the 1827 I/O Configurator, Form A22-6872.

@

Multiplexor Channel

Printed in U. S. J:... ₁₅

International Business Machines Corporation Data Processing Division

112 East Post Road, White Plains, N. Y. 10601

i >

_N

N I 0\ 00 N

().)

.-

I