• Aucun résultat trouvé

Experimental Design of Stand-alone FieldOriented Control for WECS in Variable SpeedDFIG-based on Hysteresis Current Controller

N/A
N/A
Info
Télécharger
Protected

Academic year: 2021

Partager "Experimental Design of Stand-alone FieldOriented Control for WECS in Variable SpeedDFIG-based on Hysteresis Current Controller"

Copied!
1
0
0

Chargement.... (Voir le texte intégral maintenant)

Texte intégral

(1)

15-th International Conference on Electrical Machines, Drives and Power Systems (ELMA) 2017

Experimental Design of Stand-alone Field Oriented Control for WECS in Variable Speed

DFIG-based on Hysteresis Current Controller

Fayssal AMRANE, Azeddine CHAIBA, Bruno FRANCOIS, Badreddine BABES

Abstract : This paper presents the experimental design of a stand-alone field-oriented control (FOC) for wind turbine based on a doubly fed induction generator (DFIG). The control law is synthesized using a hybrid FOC-Hysteresis current controller (HCC) in Rotor side converter (RSC) and the stator is connected to the resistive load via rectifier (nonlinear load). The regulation is achieved below the synchronous speed (Hypo-synchronous mode). The implementation is realized using dSPACE1104 single board control and acquisition interface. The obtained results of the proposed control present high performance in steady and transient states.

Keywords : Doubly fed induction generetor (DFIG), Field oriented control (FOC), Hysteresis current controller (HCC), Rotor/Stator side converter (RSC/SSC), dSPACE1104

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Télécharger maintenant ( PDF - 1 Page - 7.76 KB )

Documents relatifs

What Stator Current Processing Based Technique to Use for Induction Motor Rotor Faults Diagnosis?

Under abnormal conditions, for example in the presence of rotor cage faults such as broken bars, (9) and (10) are no longer valid, because the induction motor supply

Modeling and Control of a Marine Current Turbine Driven Doubly-Fed Induction Generator

Seifeddine BENELGHALI, Mohamed BENBOUZID, Jean-Frederic CHARPENTIER - Modeling and Control of a Marine Current Turbine Driven Doubly-Fed Induction Generator - IET Renewable

Stator current demodulation for induction machine rotor faults diagnosis

3) Teager energy operator: The Teager energy operator (TEO) allows to track the IF and the IA of a modulated signal without computing the analytic signal [26].. The ESA

High-Order Sliding Mode Control of a Marine Current Turbine Driven Doubly-Fed Induction Generator

Index Terms—Doubly-fed induction generator (DFIG), high-order sliding mode (HOSM), marine current turbine (MCT), modeling, nonlinear controlM.

Experimental Design of Stand-alone Field Oriented Control for WECS in Variable Speed DFIG-based on

Daryabeigi, "A Combined Vector and Direct Power Control for DFIG-based Wind Turbines", IEEE Transactions on Sustainable Energy, Vol. [3] Heng Nian, Yipeng Song,

Real Time Implementation of Grid-connectioncontrolusing Robust PLL for WECS in VariableSpeedDFIG-based on HCC

Keywords : Doubly fed induction generetor (DFIG), Field oriented control (FOC), Hysteresis current controller (HCC), Rotor side converter (RSC), dSPACE1104. Centre de Recherche

Real Time Implementation of Grid-connection control using Robust PLL for WECS in Variable Speed DFIG-based on HCC

[18] Fayssal Amrane, Azeddine Chaiba and Ali Chebabhi: "Improvement Performances of Doubly Fed Induction Generator via MPPT Strategy using Model Reference Adaptive Control

Modelling and simulation of a doubly fed induction generator in stand alone variable speed hydro turbine

Modelling and Simulation of a Doubly Fed Induction Generator for isolated Grid(l) Micro-Hydro Power station(2) in Variable Speed Turbine for equatorial medium RAMUZ Denis