• Aucun résultat trouvé

THE INFLUENCE OF ZnCl2 CONCENTRATION ON THE MORPHOLOGY OF THE ZnO DEPOSIT OBTAINED BY ELECTRODEPOSITION

N/A
N/A
Info
Télécharger
Protected

Academic year: 2021

Partager "THE INFLUENCE OF ZnCl2 CONCENTRATION ON THE MORPHOLOGY OF THE ZnO DEPOSIT OBTAINED BY ELECTRODEPOSITION"

Copied!
1
0
0

Chargement.... (Voir le texte intégral maintenant)

Texte intégral

(1)

CPCQ 2015, 31 Mars - 02 Avril 2015 2015

THE INFLUENCE OF ZnCl2

CONCENTRATION ON THE MORPHOLOGY OF THE ZnO DEPOSIT OBTAINED BY

ELECTRODEPOSITION

Tadjenanet Yassmina, Belkhalfa Hakim, Dokhan Nahed

Abstract : Zinc oxide (ZnO) thin film and nanostructures have great potential for applications in the fields of optoelec-tronic, sensor devices and solar cells (photovoltaic). In this work, zinc oxide nanowires and thin films were electrodeposited on molybdenum substrates. Electrochemical deposition was performed with hydrogen peroxide as hydroxide ions source, the applied potential was -1.03 V versus silver-silver chloride electrode (Ag/AgCl), during 45 minutes at room temperature. The morphology and structure characterizations of nanowires and thin films of ZnO were carried out by scanning electron microscopy and X-ray diffraction. The resulting thin films and nanowires have a good crystallinity and had a high c-axis orientation. As the electrodeposition parameters have significant influence on the morphology the deposits, the concentration of ZnCl2 played a key role in this process. More researches can be performed by electrochemical deposition of ZnO on other substrates (copper, silicon, etc.) under ambient conditions and with different ZnCl2 concentration.

Keywords : : ZnO, Thin films, nano-wires, electrochemical deposition

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Télécharger maintenant ( PDF - 1 Page - 7.97 KB )

Documents relatifs

The influence of LiF layer abd ZnO nanoparticels addings on the performances of flexible photovoltaic cells based on polymer blends

The parameters characterizing a photovoltaic cells were determined and we can notice that for PET/ITO/PEDOT:PSS + ZnO nanoparticles/P3HT:PCBM(1:1)/LiF/Al structures were obtained

THE INFLUENCE OF ZnCl2

Electrochemical deposition was performed with hydrogen peroxide as hydroxide ions source, the applied potential was -1.03 V versus silver-silver chloride electrode (Ag/AgCl),

The Effect of Solar Spectral Irradiance and Temperature on the Electrical Characteristics of a ZnO-SiO2-Si(N) Photovoltaic Structure

Our study is made on a ZnO-SiO2-Si (N) solar cell; it proves that the spectral response has higher collection efficiency for carriers generated by ultraviolet light and a

Electrochemical synthesis of ZnO thin film andnanowire for piezoelectric applications

Samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and Electrochemical impedance spectroscopy (EIS),

Electrochemical synthesis of ZnO thin film and nanowire for piezoelectric applications

Samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and Electrochemical impedance spectroscopy (EIS), to

The performance of thin film solar cells employing photovoltaic Cu 2—x Te-CdTe heterojunctions

- Effect of base resistivity on the load charac- teristics of single crystal solar cells (shallow donor. concentration

Electrodeposition and selenization of brass/tin/germanium multilayers for Cu2Zn(Sn1-xGex)Se4 thin film photovoltaic devices

Because of the low current ef ficiency (approximately 1.6%), the germanium coating thickness as a function of the deposition charge density deviated more from linearity (R 2 =

The research on preparation of ZnO nano-material and photoelectric devices

In the above experiments, ZnO microcrystalline film was prepared on GaN template through multi-time growth by hydrothermal method, electrically pumped single mode laser emission