• Aucun résultat trouvé

Numerical modeling of shape memory alloy problem in presence of perturbation: application to Cu-Al-Zn-Mn specimen

N/A
N/A
Protected

Academic year: 2021

Partager "Numerical modeling of shape memory alloy problem in presence of perturbation: application to Cu-Al-Zn-Mn specimen"

Copied!
8
0
0

Texte intégral

Références

Documents relatifs

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

These dislocations were not induced by classical cold work in the 6 phase because the "training" static stress was always very much smaller than the usual yield stress It

Application of Regularized Digital Images Correlation Analysis to the Tensile Test of NiTi Shape Memory Alloy: Application de la corrélation d’images régularisé pour 1D tensile test

cylindrical edges, there are four effective parameters: (i) the increase in the matrix concentration, (ii) the geometrically necessary condition, (iii) the increase in the

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

193K and 296K, respectively. The fracture stresses of the two bicrystals are quite different. This tendency is essentially the same as that for single crystals, in

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

Pour cette étape de chargement quasi-statique, il est intéressant de noter que le calcul des sources de chaleur à partir des variations de température à l'aide de l'équation