• Aucun résultat trouvé

Revealing the sub-50 ms electrochemical conversion of silver halide nanocolloids by stochastic electrochemistry and optical microscopy

N/A
N/A
Protected

Academic year: 2021

Partager "Revealing the sub-50 ms electrochemical conversion of silver halide nanocolloids by stochastic electrochemistry and optical microscopy"

Copied!
9
0
0

Texte intégral

Loading

Figure

Figure 1. Scheme of the  two experimental setups,  using (a) an UME electrode and (b)  an optical BALM sensor, for probing the stochastic EC collision of single AgX NP on gold  electrode surface
Figure  2.  (a)  SEM  image  of  AgX  NPs  adsorbed  on  a  gold  electrode.  (b)  Size  dispersion
Figure 4a presents the experimental optical images for 100nm  AgX  or  Ag  NPs,  respectively,  pre-adsorbed  on  the  BALM  sensor,  and  recorded  in  electrolytic  solution  (absence  of  polarization  of  the  Au  surface)
Figure 4. a) Experimental optical images recorded after adsorption of 100nm AgX NPs  and Ag NPs at the Au optical sensor/electrode surface

Références

Documents relatifs

5,6,16 − 22 The current study reports more fundamental research on the in situ formation of silver nanoparticles (Ag-NPs) onto/into five textile fibers (cotton (untreated and

The RELCAM, an optical transparent sensor for geometry alignment and monitoring

L’intention première qui sous-tendait la réalisation d’une épreuve de production d’écrit était d’une part de mettre tous les élèves dans une situation telle qu’elle

Case Laboratories for Electrochemical Studies and the Chemistry Department, Case Western Reserve University, Cleveland, Ohio 44106, U. - Cet article passe en revue l'ktat actuel

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

5 ème conférence internationale des énergies renouvelables ( CIER 17 ) période du 20 au 22 décembre 2017 a Souse, Tunisie.. Electrochemical, Structural, and optical properties of

- les caractérisations rhéologiques de différents bétons autoplaçants réalisées à l’aide de la sonde Viscoprobe implantée dans un malaxeur planétaire et

Dans la cinquième partie, on prouve, grâce à un résultat de Rodier, une formule donnant le nombre de modèles de Whittaker d’un type fixé d’une représentation