Identification of the hardening law of materials with spherical indentation using the average representative strain for several penetration depths

The force-displacement curve obtained from numerical simulations with the parameters found in Table 1 d, taking into account the indenter deformability matches the experimental

The procedure described in [20] has been applied to the exper- imental indentation curves in order to remove the displacement due to the indenter’s deformations. 1) to be obtained

1 shows that the hardening curve identified by indentation test is higher than those obtained by shear and tensile tests on a plastic deformation range between

Keywords: Spherical indentation, average representative strain, carbonitrided steels, hardening law, mechanical characterization, confidence domain.. * Corresponding

By using a new method, based on the reflection pulse technique, we measured the temperature dependence of the penetration depth in YBa2Cu307-~.. Also, we

After addressing the distinction between ex-ante regulation (e.g. through the definition of net neutrality rules) and ex-post regulation (e.g. by means of competition

A novel method for determining the small-strain shear modulus of soil using the bender elements technique.. Yejiao Wang, Nadia Benahmed, Yu-Jun Cui, Anh

Identification of material properties using indentation test and shape manifold learning approach, Computer Methods in Applied Mechanics and Engineering, 297 : 239-257, 2015.