Texte intégral
Welded micrographic structure determination using ultrasonic analysis
In this paper, the aim of our study is the use of ultrasound to show experimentally the change of the microstructure of a material after a welding operation. Two welded carbon steel plates have been selected to be investigated. Two processes are considered: The flux wire process and manual arc process.
Documents relatifs
of elliptic curves having complex multiplication with special Γ-values (cf. Function field, Kronecker limit formula, Eisenstein series, Drinfeld modules... This work was supported
The unitary maps ϕ 12 will be very useful in the study of the diagonal action of U(2) on triples of Lagrangian subspaces of C 2 (see section 3).. 2.4
Mean values, standard deviations and coefficient of variation were calculated for each of the candidates, polio types and total virus for both in-house and the NIBSC
The data from this study show that both 16/284 and 16/322 are suitable as reference standards to measure RSV neutralization activity in a range of sample types, particularly
The residual stresses evolution have been explained by the heterogeneous modifications of the microstructure particularly a marked decrease in the grain size, a high modification of
The goal of this work was to determine the longitudinal residual stress distribution in a TIG weld on Ti- 6Al-4V and to compare the stress distribution to the
Duplex stainless steels 2205 are widely used in constructional and petrochemical applications because of their good mechanical and corrosion properties. The objective of
Impact of the heat treatments on the microstructure of the aluminum alloys 7075 T6 welded by the friction stir welding process.. Khatir Mohamed, Temmar Mustapha, Aissou Hacene,
