• Aucun résultat trouvé

Static eccentricity fault modeling in permanent-magnet synchronous motors

N/A
N/A
Protected

Academic year: 2021

Partager "Static eccentricity fault modeling in permanent-magnet synchronous motors"

Copied!
1
0
0

Texte intégral

(1)

8th International Conference on Modelling, Identification and Control (ICMIC) 2016

Static eccentricity fault modeling in permanent-magnet synchronous motors

Radia Abdelli, Ahcene Bouzida, Omar TOUHAMI, M'hamed OUADAH

Abstract : In this paper, a model based on the finite element analysis has been developed for healthy and eccentric PMSM. The proposed model is analyzed by time stepping Finite element method. The electromagnetic field distribution, air-gap magnetic flux density and the leakage inductances under healthy and eccentric rotor have been calculated. Meanwhile, the MCSA of the healthy and faulty PMSM is inspected under various static eccentricity levels.

Keywords : PMSM, Finite Element Method, diagnosis, Static Eccentricity, Spectral analysis

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Documents relatifs

The present work demonstrates an original one-dimensional (1D) analytical model, dedicated to a Rosen-type PT and simulation results are successively compared

 JavaScript (EcmaScript) pour les traitements locaux, et DOM (Document Object Model) qui accède aux éléments de la page ou du formulaire ou aux éléments d'un

‘‘Layer- Wise Mechanics and Finite Element Model for the Dynamic Analysis of Piezoelectric Composite Plates,’’ International Journal of Solids and Structures, 34:359—378.

Relationship between Fungal Colonisation of the Respiratory Tract in Lung Transplant Recipients and Fungal Contamination of the Hospital Environment... Relationship between

Figure 2d, shows the evolution of the intensity of such Bragg peaks, which vanishes at 142 K and characterizes the temperature above which the spin-state concentration wave,

/ La version de cette publication peut être l’une des suivantes : la version prépublication de l’auteur, la version acceptée du manuscrit ou la version de l’éditeur.. For

A-1.2.1.1. 1)b) Conformité au CNP au moyen de solutions de rechange. Une conception qui diffère des solutions acceptables de la division B doit être considérée comme une « solution

Montagne, Benoît and Lachaud, Frédéric and Paroissien, Eric and Martini, Dominique and Congourdeau, Fabrice Nonlinear finite element analysis of composite bolted lap