• Aucun résultat trouvé

Co-doped LaAlO3 perovskite oxide for NOx-assisted soot oxidatio

N/A
N/A
Protected

Academic year: 2021

Partager "Co-doped LaAlO3 perovskite oxide for NOx-assisted soot oxidatio"

Copied!
1
0
0

Texte intégral

(1)

Co-doped LaAlO3 perovskite oxide for NOx-assisted soot

oxidation

Authors

Quang Nguyen Tran, Ferenc Martinovic, Monica Ceretti, Serena Esposito, Barbara Bonelli, Werner Paulus, Francesco Di Renzo, Fabio A Deorsola, Samir Bensaid, Raffaele Pirone

Publication date

2020/1/5

Journal

Applied Catalysis A: General

Volume 589 Pages 117304 Publisher Elsevier Description

In the framework of nowadays challenges in the automotive catalysis, directed to the mitigation of pollution caused by the emissions of internal combustion engines, a series of LaAl1-xCoxO3 perovskites were investigated with the purpose of enhancing the oxidation of

soot in the presence of NOx. Perovskite oxides LaAl1-xCoxO3 (x = 0; 0.25; 0.5; 0.75 and 1)

were synthesized by a sol-gel route and characterized by different methods: X-Ray diffraction (XRD), H2-temperature programmed reduction (H2-TPR), N2-sorption, O2/NOx-temperature

programmed desorption (TPD) and X-ray photoelectron spectroscopy (XPS). The perovskite oxides were tested as catalysts for NO oxidation in isothermal mode and for NOx-assisted

soot oxidation in temperature programmed reaction. Structural results reveal that Co is well incorporated in the perovskite structure expanding the unit cell, and doping Co may result in the …

Références

Documents relatifs

The reason we see no such trend among redshift zero haloes in our sample may be because M /M ∗ for our simulated haloes is never much larger than unity, below which the slope of

Thus, it becomes possible to obtain data on particle density, shape, specific composition and on formation or deposition mechanisms of chemical compounds.. 3.1

centres are produced by this process. It is concluded that in this region colour centres are produced by trapping electrons at pre-existing oxygen vacancies, and that a large

In this analysis, we remove regions with IRAS 100 µm emis- sion higher than 10 MJy/sr which is optimal, as will be shown in Sect. Figure 4 shows the variations of the calibration

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

The aim of this study is (1) to characterize the optical and physical properties (daily and seasonal cycles) and (2) to investigate the dependence of these properties on air mass

With similar composition, the hydrophobic acrylate monomer in block copolymers contributes to a decrease of cloud point temperatures compared to pure PNIPAM to a much lesser

formation: petrography, FT-IR and oxygen isotope ratio of silcrete quartz cement, Lake Eyre Basin (Australia).. Anne Alexandre, Jean-Dominique Meunier, Emmanuelle Llorens, Steve