Design and construction of a silent wind tunnel for aeroacoustic research

(1)

(2)

The individual papers are Copyright of their respective authors.

Proceedings of the 4:th CEAS Conference in Link¨oping, 2013.

Editors:

Tomas Melin Link¨opings Universitet Petter Krus Link¨opings Universitet Emil Vinterhav SCC ECAPS

Knut ¨Ovreb¨o SAAB AB

Place of publication: Link¨oping, Sweden Publisher: Link¨oping University Electronic Press SWEDEN

ISBN: 978-91-7519-519-3 First Edition, October 2013.

(3)

Copyright

The publishers will keep this document online on the Internet or its possible replacement from the date of publication barring exceptional circumstances. The online availability of the document implies permanent permission for anyone to read, to download, or to print out single copies for his/her own use and to use it unchanged for noncommercial research and educational purposes. Subsequent transfers of copyright cannot revoke this permission. All other uses of the document are conditional upon the consent of the copyright owner. The publisher has taken technical and administrative measures to assure authenticity, security and accessibility. Accord- ing to intellectual property law, the author has the right to be mentioned when his/her work is accessed as described above and to be protected against infringement. For additional information about Link¨oping University Electronic Press and its procedures for publication and for assurance of document integrity, please refer to its www home page: http://www.ep.liu.se/.

Link¨oping University Electronic Press Link¨oping, Sweden, 2013 cThe Authors, 2013

Proceedings

The full length papers presented in this book are the scientific contributions presented at the conference. For abstracts of the technical contributions, please review the book of abstracts for the CEAS2013 conference.

(4)

(5)

PROCEEDINGS

of the 4:th CEAS conference in Link¨ oping, 2013

Editors:

Tomas Melin Petter Krus Emil Vinterhav

Knut ¨ Ovreb¨ o

(6)

We welcome you to the fourth Council of European Aerospace Societies (CEAS) Air and Space Conference. We have chosen the theme ’Innovative Europe’ for the gathering of Europe’s most qualified professionals in air and space technologies.

Europe has a leading role in research, engineering and manufacture of aerospace systems. Today, development of new concepts and systems are increasingly dependent on cooperation and mu- tually beneficial relationships, such that meetings and networking between professionals become even more important. Those are the basics for this conference, and the necessary elements for the air and space industries of Europe to take innovative and leading steps into the future. We are very happy to have received so many high quality contributions in such a wide range of topics.

We are also proud to have a number of very high profile keynote speakers and thematic sessions with invited speakers, to reflect the overall theme of the conference.

There are contributions from more than twenty countries, also from outside of Europe. In- tegrated in this conference are also a great number of national contributions in line with our regular national conference on aviation and space technologies. We feel confident that this range of presentations will firmly establish the CEAS Air & Space conference as one of the most important events among the community of air and space professionals.

The city of Link¨oping has a background of more than one hundred years in aviation, and is the locus of many emerging companies in the air and space arenas. Additionally, Link¨oping is situated in a beautiful rural district with many lakes, channels and rivers. The city was founded in the 12th century and is the fifth largest city in Sweden, where you can find many places and buildings of historical interest.

We wish you a fruitful meeting and a pleasant stay in Link¨oping.

Petter Krus

Chairman of programme committee Professor in Fluid and Mechatronic Systems, Link¨oping University

Roland Karlsson

Chairman of the organizing committee Chairman of the Swedish Society of Aeronautics and Astronautics

ii

(7)

1 3 G. R. Seyfang Micro T-strips to save cost and fuel

7 10 A.Kwiek Study on the influence of deflected strake on the rocket plane aerodynamic characteristics.

17 37 M.R. Chiarelli Fluid-structure interaction analyses of wings with curved planform: preliminary aeroelastic results 25 41 R. Putzu Design and construction of a silent wind tunnel for aeroacoustic research

32 44 A. Krzysiak An Experimental Study of a Separation Control on the Wing Flap Controlled by Close Loop System 41 46 T. Berglind Numerical Simulation of Weapons Bay Store Separation

49 49 M.K. Jung Numerical Investigation of Aerodynamic Interaction for a Quad-Rotor UAV Configuration

57 84 S. Wiggen Development of an unsteady wind-tunnel experiment for vortex dominated flow at a Lambda – wing 67 109 M. Kamii Experimental Analysis on Dynamic Characteristics of an Ornithopter

76 111 W. Stalewski

Computational design and investigations of closed-loop, active flow control systems based on fluidic devices, improving a performance of wing high-lift systems.

84 124 A. Fedele Experimental aircraft system identification from flight data: procedures and results.

94 135 H.T. Endo Experimental Study on Aerodynamic Characteristics of Ornithopter

101 136 M. Zhang Aerodynamic Shape Design for a Morphing Wing with Wingtip of a Regional Jetliner 114 137 M. Tomac Steps towards automated robust rans meshing

124 138 E. Otero

Improving the performance of the CFD code Edge using LU-SGS and line-implicit methods

135 144 V.P. Shorin Acoustic probes for pressure pulsation measurement in gas turbine flow duct and combustor 138 161 N. Fabrizio Wind tunnel tests of a new commuter aircraft

150 176 M.S. O’Regan Wingtip Vortices in the Near-field - A Numerical and Experimental Investigation

160 179 C. Schmidt A Simple Laboratory Approach to Investigate Boundary Layer Transition due to Free Stream Particles 170 261 T.D. Kothalawala The influence of ground proximity on the aerodynamics of a wheel

180 265 S.A. Fazelzadeh Effects of roll maneuver on unrestrained aircraft wing/stores flutter 188 127 V. Alarotu

Aircraft Hydraulic Fluid On-Line Condition Monitoring System for Maintenance and Troubleshooting Purposes

196 129 V. Alarotu

Combined Virtual Iron Bird and Hardware-in-the-Loop Simulation Research Environment for Jet Fighter Hydraulic Systems

203 158 L.C. Akoto Modeling backlash in drivetrains

214 64 S. Deinert Aeroelastic Tailoring Through Combined Sizing and Shape Optimization Considering Induced Drag 226 97 S. Chiesa About feasibility of a 5th generation light fighter aircraft

236 122 L. Bougas Propulsion integration and flight performance estimation for a low observable flying wing demonstrator 245 146 C. Galiński The Concept of the Joined Wing Scaled Demonstrator Programme

255 182 M.V.R. Chaitanya RAPID - Robust Aircraft Parametric Interactive Design 263 183 M.V.R. Chaitanya Integrated Aircraft Design Network

270 199 P. D. Ciampa Preliminary Design for Flexible Aircraft in a Collaborative Environment 282 200 P. Meng Modeling for Physics Based Aircraft Predesign in a Collaborative Environment

292 211 E. Moreira An Application of AHP, TOPSIS-Fuzzy and Genetic Algorithm in Conceptual Aircraft Design 301 257 A. Steiz Parametric Design Studies for Propulsive Fuselage Aircraft Concepts

317 194 Ö. Festin Vision system supported manufacturing and repair of aircraft composite structures 323 267 N. Petre

Modeling and numerical simulation of an open-loop miniature capacitive accelerometer for inertial navigation applications

330 47 R. Mantellato

Deorbiting of spacecraft at the end of life with electrodynamic tethers stabilized by passive oscillation dampers

340 48 A.D. Koch Multidisciplinary approach for assessing the atmospheric impact of launchers 347 100 N. Wingborg High performance green propellants

354 116 B. Bastida Virgili Criteria for the Selection of Targets for Active Debris Removal 364 134 M. De Santis Environmental impact assessment of space sector

364 181 J. Jain Risk Assessment and Analysis of Disposal and Reentry of Space Debris 374 248 M. Saint-Amand ASTRIUM Space Transportation

387 259 W. Welland De-orbit motor for nanosatellites based on solid propulsion 395 191 E. Moerland

Collaborative understanding of disciplinary correlations using a low-fidelity physics based aerospace toolkit

407 198 A. Basermann,

Ad hoc Collaborative Design with Focus on Iterative Multidisciplinary Process Chain Development applied to Thermal Management of Space Crafts

416 71 A. Olejnik

Application of CAD/CAM/CAE Systems to the Process of Aircraft Structures Analysis by Means of Reverse Engineering Methods

426 148 E.H. Baalbergen Collaborative multi-partner modelling & simulation processes to improve aeronautical product design 436 164 K. Risse Conceptual aircraft design with hybrid laminar flow control

448 174 A. Rizzi Collaborative Aircraft Design using AAA and CEASIOM linked by CPACS Namespace 459 205 Björn Nagel

Virtual Aircraft Multidisciplinary Analysis and Design Processes - Lessons Learned from the Collaborative Design Project VAMP

471 223 G. La Rocca

Investigation of multi-fidelity and variable-fidelity optimization approaches for collaborative aircraft design

483 224 G. La Rocca Feasibility study of a nuclear powered blended wing body aircraft for the Cruiser/Feeder concept 496 230 C. Jouannet Personal jet, a student project

503 236 D. Scholz Open Access Publishing in Aerospace – Opportunities and Pitfalls 516 264 D. Zafirov UAV Joined Wing Testbed

525 21 P. C. Vratny Battery pack modeling methods for universally-electric aircraft

Index sorted by page number

Page Nr:

Paper

Nr: First Author Title

(8)

536 190

T. Goetzendorf-

Grabowski Comparison of traditionally calculated stability characteristics with flight test data of PW-6U sailplane 544 4 G.A. Di Meo

SESAR and Military Aircraft: Human Machine Interface definition for 4D Trajectory Management and ASAS Spacing functionalities

555 18 M. Micallef

Towards Optimised Profile Descents at Malta International Airport through Revised Approach Procedures

571 38 A. Popov The Russian Federation airspace structure analysis with the use of ATM research simulation tool 581 45 L. Rundqwist Unmanned collaborating autonomous aircraft

591 51 J. Wallin The Servitisation of the Aerospace Industry and the Affect on its Product Development 598 90 K.Straube A new safety net for tower runway controllers

608 92 C. Grillo Automatic Landing System for Civil Unmanned Aerial System 617 104 F. Asadi Route Optimization for Commercial Formation Flight Using PSO & GA 623 114 T. Melin Validation of a numerical simulation tool for aircraft formation flight 629 142 H.H. Hesselink Innovative airport and ATM concept (operating an endless runway) 639 175 J Jeppson Early assurance of Gripen E combat performance

642 201 A. Malik

Concept Assessment for Remotely Piloted Commercial Aircraft using Multi-Attribute Nonlinear Utility Theory

653 207 S. Hartjes Terminal Route Optimization for Cumulative Noise Exposure 663 221 F. Matares

DORATHEA: an innovative security risk assessment methodology to enhance security awareness in ATM

672 263 R. Mori Optimal Spot-out Time – Taxi-out Time Saving and Corresponding Delay 682 27 M. Carlsson Enabling Uncertainty Quantification of Large Aircraft System Simulation Models

693 130 J. Aaltonen Process for Evaluation and Validation of Non-Original Components for Aircraft Hydraulic Systems 700 171 R. Denis PRESAGE : virtual testing platform application to thrust reverser actuation system

709 187 I. Staack Integration of On-Board Power Systems Simulation in Conceptual Aircraft Design 719 53 A.V. Krivcov Coupled CFD simulation of gas turbine engine core

726 79 S. Zietarski

A unified method of identification and optimization of airfoils for aircrafts, turbine and compressor blades.

736 94 A. C. Petcu Numerical simulations of two-phase turbulent reactive flows

742 98 A. Herbertz C*-Efficiency Evaluation of Transpiration Cooled Ceramic Combustion Chambers

742 166 C. Jeßberger Sustainable Alternative Fuels for Aviation: International Emission Targets vs. Sustainability Aspiration 761 168 V.N. Matveev Efficiency improvement of a multistage compressor by optimization stagger angles of blade rows 761 275 S.Bagassi Development of a preliminary design method for hybrid propulsion

774 113 A. D’Ottavio Feasibility study of small satellites launcher vehicle launched from atmospheric carrier aircraft 784 119 T. Geerken Environmental impact assessment of the PROBA2 satellite

790 151 A. Helmersson Guidance Systems for Sounding Rockets 793 160 R. Longstaff Skylon D1 Performance

793 203 T. Hult Time-Triggered Ethernet communication in launcher avionics

805 50 A. Rosell Swedish and European research collaboration in simulation supported POD 812 70 D. Abajo Buckling and modal analysis of rotationally restrained orthotropic plates

822 78 R. Liepelt Variable Fidelity Loads Process in a Multidisciplinary Aircraft Design Environment 833 108 M. Rembeck

A combined numerical and statistcal approach to crack propagation modeling and prediction of crack propagation rates

843 152 A. Myrelid Studies on manufacturing-related management accounting

849 218 M. Zaccariotto Fatigue Crack Propagation with Peridynamics: a sensitivity study of Paris law parameters 855 256 M. Oliver A400M Aeroelastics and Dynamic Tests

869 197 M. Kunde Advantages of an Integrated Simulation Environment

878 35 F.G. Florean LIF experiments in a turbulent reactive flow using an afterburner 885 105 C. Cuciumita Novel Pulse Detonation Engine Concept

895 120 T. Gorecki

The support process, simulation research design and structure of the new helicopter’s construction schematics with special emphasis on ground resonance phenomenon

901 121 J. Popescu

Advanced Strategic Planning Regarding the Development of a Turbopump System for a Liquid Fuel Rocket Engine

909 154 M. Thuswaldner Anisogrid technology made available for the west - a cooperation between RUAG, KTH and CRISM 913 165 M. Elfving Enhanced methods for geometric and photometrical alignment when projecting in domes

921 180 D-R. Schmitt Demonstration of Satellites Enabling the Insertion of Remotely Piloted Aircraft Systems in Europe 928 186 R. Li

Design of a small air data and MEMS INS/GPS integrated navigation system for wing-in-ground effect vehicles

936 202 P. Caso CFD sensitivity analisys on bumped airfoil characteristics for inflatable winglet 946 210 A. de Paula A Case Study in Aeronautical Engineering Education

955 245 P. Voigt Astrium perspective on space debris mitigation & remediation

965 272 H.A. Moser Fostering the Evolution of Systems Thinking in Space Industry with the WAVES Strategy 972 300 L. Souza Application of the mixed H2/H00 Method to Design the Microsatellite Attitude control system 979 302 A.Abdalla The effect of Engine Dimensions on Supersonic Aircraft Performance

985 500 K.K. Sairajan Finite Element Model Correlations and Response Predictions of Spacecraft Structure Nr: Nr:

(9)

693 130 J. Aaltonen Process for Evaluation and Validation of Non-Original Components for Aircraft Hydraulic Systems 196 129 V. Alarotu

812 70 D. Abajo Buckling and modal analysis of rotationally restrained orthotropic plates 979 302 A.Abdalla The effect of Engine Dimensions on Supersonic Aircraft Performance 203 158 L.C. Akoto Modeling backlash in drivetrains

188 127 V. Alarotu

617 104 F. Asadi Route Optimization for Commercial Formation Flight Using PSO & GA

426 148 E.H. Baalbergen Collaborative multi-partner modelling & simulation processes to improve aeronautical product design 761 275 S.Bagassi Development of a preliminary design method for hybrid propulsion

407 198 A. Basermann,

41 46 T. Berglind Numerical Simulation of Weapons Bay Store Separation

236 122 L. Bougas Propulsion integration and flight performance estimation for a low observable flying wing demonstrator 682 27 M. Carlsson Enabling Uncertainty Quantification of Large Aircraft System Simulation Models

936 202 P. Caso CFD sensitivity analisys on bumped airfoil characteristics for inflatable winglet 263 183 M.V.R. Chaitanya Integrated Aircraft Design Network

255 182 M.V.R. Chaitanya RAPID - Robust Aircraft Parametric Interactive Design

17 37 M.R. Chiarelli Fluid-structure interaction analyses of wings with curved planform: preliminary aeroelastic results 226 97 S. Chiesa About feasibility of a 5th generation light fighter aircraft

270 199 P. D. Ciampa Preliminary Design for Flexible Aircraft in a Collaborative Environment 885 105 C. Cuciumita Novel Pulse Detonation Engine Concept

774 113 A. D’Ottavio Feasibility study of small satellites launcher vehicle launched from atmospheric carrier aircraft 946 210 A. de Paula A Case Study in Aeronautical Engineering Education

214 64 S. Deinert Aeroelastic Tailoring Through Combined Sizing and Shape Optimization Considering Induced Drag 700 171 R. Denis PRESAGE : virtual testing platform application to thrust reverser actuation system

544 4 G.A. Di Meo

913 165 M. Elfving Enhanced methods for geometric and photometrical alignment when projecting in domes 94 135 H.T. Endo Experimental Study on Aerodynamic Characteristics of Ornithopter

138 161 N. Fabrizio Wind tunnel tests of a new commuter aircraft

180 265 S.A. Fazelzadeh Effects of roll maneuver on unrestrained aircraft wing/stores flutter

317 194 Ö. Festin Vision system supported manufacturing and repair of aircraft composite structures 878 35 F.G. Florean LIF experiments in a turbulent reactive flow using an afterburner

245 146 C. Galiński The Concept of the Joined Wing Scaled Demonstrator Programme 536 190

T. Goetzendorf-

Grabowski Comparison of traditionally calculated stability characteristics with flight test data of PW-6U sailplane 608 92 C. Grillo Automatic Landing System for Civil Unmanned Aerial System

653 207 S. Hartjes Terminal Route Optimization for Cumulative Noise Exposure 790 151 A. Helmersson Guidance Systems for Sounding Rockets

742 98 A. Herbertz C*-Efficiency Evaluation of Transpiration Cooled Ceramic Combustion Chambers 629 142 H.H. Hesselink Innovative airport and ATM concept (operating an endless runway)

793 203 T. Hult Time-Triggered Ethernet communication in launcher avionics

364 181 J. Jain Risk Assessment and Analysis of Disposal and Reentry of Space Debris 471 223 G. La Rocca

639 175 J Jeppson Early assurance of Gripen E combat performance

742 166 C. Jeßberger Sustainable Alternative Fuels for Aviation: International Emission Targets vs. Sustainability Aspiration 496 230 C. Jouannet Personal jet, a student project

49 49 M.K. Jung Numerical Investigation of Aerodynamic Interaction for a Quad-Rotor UAV Configuration 67 109 M. Kamii Experimental Analysis on Dynamic Characteristics of an Ornithopter

340 48 A.D. Koch Multidisciplinary approach for assessing the atmospheric impact of launchers 170 261 T.D. Kothalawala The influence of ground proximity on the aerodynamics of a wheel

719 53 A.V. Krivcov Coupled CFD simulation of gas turbine engine core

32 44 A. Krzysiak An Experimental Study of a Separation Control on the Wing Flap Controlled by Close Loop System 869 197 M. Kunde Advantages of an Integrated Simulation Environment

483 224 G. La Rocca Feasibility study of a nuclear powered blended wing body aircraft for the Cruiser/Feeder concept 784 119 T. Geerken Environmental impact assessment of the PROBA2 satellite

928 186 R. Li

822 78 R. Liepelt Variable Fidelity Loads Process in a Multidisciplinary Aircraft Design Environment 793 160 R. Longstaff Skylon D1 Performance

642 201 A. Malik

330 47 R. Mantellato

Index sorted by author name

Page Nr:

Paper

(10)

663 221 F. Matares

761 168 V.N. Matveev Efficiency improvement of a multistage compressor by optimization stagger angles of blade rows 623 114 T. Melin Validation of a numerical simulation tool for aircraft formation flight

282 200 P. Meng Modeling for Physics Based Aircraft Predesign in a Collaborative Environment 555 18 M. Micallef

395 191 E. Moerland

292 211 E. Moreira An Application of AHP, TOPSIS-Fuzzy and Genetic Algorithm in Conceptual Aircraft Design 672 263 R. Mori Optimal Spot-out Time – Taxi-out Time Saving and Corresponding Delay

965 272 H.A. Moser Fostering the Evolution of Systems Thinking in Space Industry with the WAVES Strategy 843 152 A. Myrelid Studies on manufacturing-related management accounting

459 205 Björn Nagel

150 176 M.S. O’Regan Wingtip Vortices in the Near-field - A Numerical and Experimental Investigation 416 71 A. Olejnik

855 256 M. Oliver A400M Aeroelastics and Dynamic Tests 124 138 E. Otero

736 94 A. C. Petcu Numerical simulations of two-phase turbulent reactive flows 323 267 N. Petre

901 121 J. Popescu

571 38 A. Popov The Russian Federation airspace structure analysis with the use of ATM research simulation tool 25 41 R. Putzu Design and construction of a silent wind tunnel for aeroacoustic research

833 108 M. Rembeck

436 164 K. Risse Conceptual aircraft design with hybrid laminar flow control

448 174 A. Rizzi Collaborative Aircraft Design using AAA and CEASIOM linked by CPACS Namespace 805 50 A. Rosell Swedish and European research collaboration in simulation supported POD

581 45 L. Rundqwist Unmanned collaborating autonomous aircraft 374 248 M. Saint-Amand ASTRIUM Space Transportation

985 500 K.K. Sairajan Finite Element Model Correlations and Response Predictions of Spacecraft Structure 364 134 M. De Santis Environmental impact assessment of space sector

160 179 C. Schmidt A Simple Laboratory Approach to Investigate Boundary Layer Transition due to Free Stream Particles 921 180 D-R. Schmitt Demonstration of Satellites Enabling the Insertion of Remotely Piloted Aircraft Systems in Europe 503 236 D. Scholz Open Access Publishing in Aerospace – Opportunities and Pitfalls

1 3 G. R. Seyfang Micro T-strips to save cost and fuel

135 144 V.P. Shorin Acoustic probes for pressure pulsation measurement in gas turbine flow duct and combustor 972 300 L. Souza Application of the mixed H2/H00 Method to Design the Microsatellite Attitude control system 709 187 I. Staack Integration of On-Board Power Systems Simulation in Conceptual Aircraft Design

76 111 W. Stalewski

301 257 A. Steiz Parametric Design Studies for Propulsive Fuselage Aircraft Concepts 598 90 K.Straube A new safety net for tower runway controllers

909 154 M. Thuswaldner Anisogrid technology made available for the west - a cooperation between RUAG, KTH and CRISM 114 137 M. Tomac Steps towards automated robust rans meshing

354 116 B. Bastida Virgili Criteria for the Selection of Targets for Active Debris Removal 955 245 P. Voigt Astrium perspective on space debris mitigation & remediation 525 21 P. C. Vratny Battery pack modeling methods for universally-electric aircraft

591 51 J. Wallin The Servitisation of the Aerospace Industry and the Affect on its Product Development 387 259 W. Welland De-orbit motor for nanosatellites based on solid propulsion

57 84 S. Wiggen Development of an unsteady wind-tunnel experiment for vortex dominated flow at a Lambda – wing 347 100 N. Wingborg High performance green propellants

849 218 M. Zaccariotto Fatigue Crack Propagation with Peridynamics: a sensitivity study of Paris law parameters 516 264 D. Zafirov UAV Joined Wing Testbed

101 136 M. Zhang Aerodynamic Shape Design for a Morphing Wing with Wingtip of a Regional Jetliner 726 79 S. Zietarski

895 120 T. Gorecki

Nr: Nr:

(11)

946 210 A. de Paula A Case Study in Aeronautical Engineering Education 833 108 M. Rembeck

598 90 K.Straube A new safety net for tower runway controllers

160 179 C. Schmidt A Simple Laboratory Approach to Investigate Boundary Layer Transition due to Free Stream Particles 726 79 S. Zietarski

855 256 M. Oliver A400M Aeroelastics and Dynamic Tests

226 97 S. Chiesa About feasibility of a 5th generation light fighter aircraft

135 144 V.P. Shorin Acoustic probes for pressure pulsation measurement in gas turbine flow duct and combustor 407 198 A. Basermann,

901 121 J. Popescu

869 197 M. Kunde Advantages of an Integrated Simulation Environment

101 136 M. Zhang Aerodynamic Shape Design for a Morphing Wing with Wingtip of a Regional Jetliner

214 64 S. Deinert Aeroelastic Tailoring Through Combined Sizing and Shape Optimization Considering Induced Drag 188 127 V. Alarotu

292 211 E. Moreira An Application of AHP, TOPSIS-Fuzzy and Genetic Algorithm in Conceptual Aircraft Design 32 44 A. Krzysiak An Experimental Study of a Separation Control on the Wing Flap Controlled by Close Loop System 909 154 M. Thuswaldner Anisogrid technology made available for the west - a cooperation between RUAG, KTH and CRISM 416 71 A. Olejnik

972 300 L. Souza Application of the mixed H2/H00 Method to Design the Microsatellite Attitude control system 955 245 P. Voigt Astrium perspective on space debris mitigation & remediation

374 248 M. Saint-Amand ASTRIUM Space Transportation

608 92 C. Grillo Automatic Landing System for Civil Unmanned Aerial System 525 21 P. C. Vratny Battery pack modeling methods for universally-electric aircraft 812 70 D. Abajo Buckling and modal analysis of rotationally restrained orthotropic plates 742 98 A. Herbertz C*-Efficiency Evaluation of Transpiration Cooled Ceramic Combustion Chambers 936 202 P. Caso CFD sensitivity analisys on bumped airfoil characteristics for inflatable winglet 448 174 A. Rizzi Collaborative Aircraft Design using AAA and CEASIOM linked by CPACS Namespace

426 148 E.H. Baalbergen Collaborative multi-partner modelling & simulation processes to improve aeronautical product design 395 191 E. Moerland

196 129 V. Alarotu

536 190

T. Goetzendorf-

Grabowski Comparison of traditionally calculated stability characteristics with flight test data of PW-6U sailplane 76 111 W. Stalewski

642 201 A. Malik

436 164 K. Risse Conceptual aircraft design with hybrid laminar flow control 719 53 A.V. Krivcov Coupled CFD simulation of gas turbine engine core

354 116 B. Bastida Virgili Criteria for the Selection of Targets for Active Debris Removal 387 259 W. Welland De-orbit motor for nanosatellites based on solid propulsion

921 180 D-R. Schmitt Demonstration of Satellites Enabling the Insertion of Remotely Piloted Aircraft Systems in Europe 330 47 R. Mantellato

25 41 R. Putzu Design and construction of a silent wind tunnel for aeroacoustic research 928 186 R. Li

761 275 S.Bagassi Development of a preliminary design method for hybrid propulsion

57 84 S. Wiggen Development of an unsteady wind-tunnel experiment for vortex dominated flow at a Lambda – wing 663 221 F. Matares

639 175 J Jeppson Early assurance of Gripen E combat performance

180 265 S.A. Fazelzadeh Effects of roll maneuver on unrestrained aircraft wing/stores flutter

761 168 V.N. Matveev Efficiency improvement of a multistage compressor by optimization stagger angles of blade rows 682 27 M. Carlsson Enabling Uncertainty Quantification of Large Aircraft System Simulation Models

913 165 M. Elfving Enhanced methods for geometric and photometrical alignment when projecting in domes 364 134 M. De Santis Environmental impact assessment of space sector

784 119 T. Geerken Environmental impact assessment of the PROBA2 satellite

67 109 M. Kamii Experimental Analysis on Dynamic Characteristics of an Ornithopter 94 135 H.T. Endo Experimental Study on Aerodynamic Characteristics of Ornithopter

849 218 M. Zaccariotto Fatigue Crack Propagation with Peridynamics: a sensitivity study of Paris law parameters 483 224 G. La Rocca Feasibility study of a nuclear powered blended wing body aircraft for the Cruiser/Feeder concept

Index sorted by title

Page Nr:

Paper

(12)

774 113 A. D’Ottavio Feasibility study of small satellites launcher vehicle launched from atmospheric carrier aircraft 985 500 K.K. Sairajan Finite Element Model Correlations and Response Predictions of Spacecraft Structure

17 37 M.R. Chiarelli Fluid-structure interaction analyses of wings with curved planform: preliminary aeroelastic results 965 272 H.A. Moser Fostering the Evolution of Systems Thinking in Space Industry with the WAVES Strategy 790 151 A. Helmersson Guidance Systems for Sounding Rockets

347 100 N. Wingborg High performance green propellants 124 138 E. Otero

629 142 H.H. Hesselink Innovative airport and ATM concept (operating an endless runway) 263 183 M.V.R. Chaitanya Integrated Aircraft Design Network

709 187 I. Staack Integration of On-Board Power Systems Simulation in Conceptual Aircraft Design 471 223 G. La Rocca

878 35 F.G. Florean LIF experiments in a turbulent reactive flow using an afterburner 1 3 G. R. Seyfang Micro T-strips to save cost and fuel

323 267 N. Petre

203 158 L.C. Akoto Modeling backlash in drivetrains

282 200 P. Meng Modeling for Physics Based Aircraft Predesign in a Collaborative Environment 340 48 A.D. Koch Multidisciplinary approach for assessing the atmospheric impact of launchers 885 105 C. Cuciumita Novel Pulse Detonation Engine Concept

49 49 M.K. Jung Numerical Investigation of Aerodynamic Interaction for a Quad-Rotor UAV Configuration 41 46 T. Berglind Numerical Simulation of Weapons Bay Store Separation

736 94 A. C. Petcu Numerical simulations of two-phase turbulent reactive flows 503 236 D. Scholz Open Access Publishing in Aerospace – Opportunities and Pitfalls 672 263 R. Mori Optimal Spot-out Time – Taxi-out Time Saving and Corresponding Delay 301 257 A. Steiz Parametric Design Studies for Propulsive Fuselage Aircraft Concepts 496 230 C. Jouannet Personal jet, a student project

270 199 P. D. Ciampa Preliminary Design for Flexible Aircraft in a Collaborative Environment

700 171 R. Denis PRESAGE : virtual testing platform application to thrust reverser actuation system

693 130 J. Aaltonen Process for Evaluation and Validation of Non-Original Components for Aircraft Hydraulic Systems 236 122 L. Bougas Propulsion integration and flight performance estimation for a low observable flying wing demonstrator 255 182 M.V.R. Chaitanya RAPID - Robust Aircraft Parametric Interactive Design

364 181 J. Jain Risk Assessment and Analysis of Disposal and Reentry of Space Debris 617 104 F. Asadi Route Optimization for Commercial Formation Flight Using PSO & GA 544 4 G.A. Di Meo

793 160 R. Longstaff Skylon D1 Performance

114 137 M. Tomac Steps towards automated robust rans meshing

843 152 A. Myrelid Studies on manufacturing-related management accounting

742 166 C. Jeßberger Sustainable Alternative Fuels for Aviation: International Emission Targets vs. Sustainability Aspiration 805 50 A. Rosell Swedish and European research collaboration in simulation supported POD

653 207 S. Hartjes Terminal Route Optimization for Cumulative Noise Exposure 245 146 C. Galiński The Concept of the Joined Wing Scaled Demonstrator Programme 979 302 A.Abdalla The effect of Engine Dimensions on Supersonic Aircraft Performance 170 261 T.D. Kothalawala The influence of ground proximity on the aerodynamics of a wheel

571 38 A. Popov The Russian Federation airspace structure analysis with the use of ATM research simulation tool 591 51 J. Wallin The Servitisation of the Aerospace Industry and the Affect on its Product Development

895 120 T. Gorecki

793 203 T. Hult Time-Triggered Ethernet communication in launcher avionics 555 18 M. Micallef

516 264 D. Zafirov UAV Joined Wing Testbed

581 45 L. Rundqwist Unmanned collaborating autonomous aircraft

623 114 T. Melin Validation of a numerical simulation tool for aircraft formation flight

822 78 R. Liepelt Variable Fidelity Loads Process in a Multidisciplinary Aircraft Design Environment 459 205 Björn Nagel

317 194 Ö. Festin Vision system supported manufacturing and repair of aircraft composite structures 138 161 N. Fabrizio Wind tunnel tests of a new commuter aircraft

150 176 M.S. O’Regan Wingtip Vortices in the Near-field - A Numerical and Experimental Investigation Nr: Nr:

(13)

1 3 G. R. Seyfang Micro T-strips to save cost and fuel 544 4 G.A. Di Meo

555 18 M. Micallef

525 21 P. C. Vratny Battery pack modeling methods for universally-electric aircraft

682 27 M. Carlsson Enabling Uncertainty Quantification of Large Aircraft System Simulation Models 878 35 F.G. Florean LIF experiments in a turbulent reactive flow using an afterburner

17 37 M.R. Chiarelli Fluid-structure interaction analyses of wings with curved planform: preliminary aeroelastic results 571 38 A. Popov The Russian Federation airspace structure analysis with the use of ATM research simulation tool

25 41 R. Putzu Design and construction of a silent wind tunnel for aeroacoustic research

32 44 A. Krzysiak An Experimental Study of a Separation Control on the Wing Flap Controlled by Close Loop System 581 45 L. Rundqwist Unmanned collaborating autonomous aircraft

41 46 T. Berglind Numerical Simulation of Weapons Bay Store Separation 330 47 R. Mantellato

340 48 A.D. Koch Multidisciplinary approach for assessing the atmospheric impact of launchers

49 49 M.K. Jung Numerical Investigation of Aerodynamic Interaction for a Quad-Rotor UAV Configuration 805 50 A. Rosell Swedish and European research collaboration in simulation supported POD

591 51 J. Wallin The Servitisation of the Aerospace Industry and the Affect on its Product Development 719 53 A.V. Krivcov Coupled CFD simulation of gas turbine engine core

214 64 S. Deinert Aeroelastic Tailoring Through Combined Sizing and Shape Optimization Considering Induced Drag 812 70 D. Abajo Buckling and modal analysis of rotationally restrained orthotropic plates

416 71 A. Olejnik

822 78 R. Liepelt Variable Fidelity Loads Process in a Multidisciplinary Aircraft Design Environment 726 79 S. Zietarski

57 84 S. Wiggen Development of an unsteady wind-tunnel experiment for vortex dominated flow at a Lambda – wing 598 90 K.Straube A new safety net for tower runway controllers

608 92 C. Grillo Automatic Landing System for Civil Unmanned Aerial System 736 94 A. C. Petcu Numerical simulations of two-phase turbulent reactive flows 226 97 S. Chiesa About feasibility of a 5th generation light fighter aircraft

742 98 A. Herbertz C*-Efficiency Evaluation of Transpiration Cooled Ceramic Combustion Chambers 347 100 N. Wingborg High performance green propellants

617 104 F. Asadi Route Optimization for Commercial Formation Flight Using PSO & GA 885 105 C. Cuciumita Novel Pulse Detonation Engine Concept

833 108 M. Rembeck

67 109 M. Kamii Experimental Analysis on Dynamic Characteristics of an Ornithopter 76 111 W. Stalewski

774 113 A. D’Ottavio Feasibility study of small satellites launcher vehicle launched from atmospheric carrier aircraft 623 114 T. Melin Validation of a numerical simulation tool for aircraft formation flight

354 116 B. Bastida Virgili Criteria for the Selection of Targets for Active Debris Removal 784 119 T. Geerken Environmental impact assessment of the PROBA2 satellite 895 120 T. Gorecki

901 121 J. Popescu

236 122 L. Bougas Propulsion integration and flight performance estimation for a low observable flying wing demonstrator 84 124 A. Fedele Experimental aircraft system identification from flight data: procedures and results.

188 127 V. Alarotu

196 129 V. Alarotu

693 130 J. Aaltonen Process for Evaluation and Validation of Non-Original Components for Aircraft Hydraulic Systems 364 134 M. De Santis Environmental impact assessment of space sector

94 135 H.T. Endo Experimental Study on Aerodynamic Characteristics of Ornithopter

101 136 M. Zhang Aerodynamic Shape Design for a Morphing Wing with Wingtip of a Regional Jetliner 114 137 M. Tomac Steps towards automated robust rans meshing

124 138 E. Otero

629 142 H.H. Hesselink Innovative airport and ATM concept (operating an endless runway)

135 144 V.P. Shorin Acoustic probes for pressure pulsation measurement in gas turbine flow duct and combustor 245 146 C. Galiński The Concept of the Joined Wing Scaled Demonstrator Programme

426 148 E.H. Baalbergen Collaborative multi-partner modelling & simulation processes to improve aeronautical product design 790 151 A. Helmersson Guidance Systems for Sounding Rockets

Index sorted by paper number

Page Nr:

Paper