• Aucun résultat trouvé

Un modèle de connecteur élément fini non linéaire pour la simulation d'assemblages boulonnés

N/A
N/A
Protected

Academic year: 2021

Partager "Un modèle de connecteur élément fini non linéaire pour la simulation d'assemblages boulonnés"

Copied!
7
0
0

Texte intégral

Loading

Références

Documents relatifs

Damit manifestierte sich auch hier ein Unterschied zum professionellen Journalismus, spielen doch gängige Kriterien der Nachrichtenwahl wie etwa Aktualität ("es gerade

Fc-H + oxidation occurs in the LLI ideally polarized at the same potential as the lower cap of the NP, present or contacting the DCE phase. This suggests that the smallest NPs

As an alternative to the above-mentioned Lambert function method, a new Y-function based extraction methodology applicable from weak to strong inversion and not

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

La figure (4.18) illustre la variation du nombre de Nusselt local sur la paroi chaude, et nous permet de remarquer que pour le facteur de forme A=3, si l’inclinaison de notre cavité

The effects beyond an esterification time of 60 minutes and an acid catalyst content of 10 per cent were not studied.. From the results it is seen that about 20 per cent of the

The agreement between neutron flux deduced and charge exchange deduced ion temperatures together with the corresponding measured 2.45 MeV peak in the neutron

In conclusion, data stream-oriented architectures are very effi- cient when handling data streams and semantic inference-based ap- proaches process semantic-level information with