• Aucun résultat trouvé

Forces Association-Based Active Contour

N/A
N/A
Info
Télécharger
Protected

Academic year: 2021

Partager "Forces Association-Based Active Contour"

Copied!
1
0
0

Chargement.... (Voir le texte intégral maintenant)

Texte intégral

(1)

International Conference on Computer, Electrical, and Systems Sciences, and Engineering 2012

Forces Association-Based Active Contour

A. B. Goumeidane, N. Nacereddine

Abstract : A welded structure must be inspected to guaranteethat the weld quality meets the design requirements to assure safetyand reliability. However, X-ray image analyses and defectrecognition with the computer vision techniques are very complex.Most difficulties lie in finding the small, irregular defects in poorcontrast images which requires pre processing to image, extract, andclassify features from strong background noise. This paper addressesthe issue of designing methodology to extract defect from noisybackground radiograph with image processing. Based on the use ofactives contours this methodology seems to give good results

Keywords : welding, radiography, Computer vision, Active contour.

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Télécharger maintenant ( PDF - 1 Page - 7.66 KB )

Documents relatifs

TECHNIQUES IN SOFT X-RAY SPECTROSCOPY

The development of highly reflecting multilayer devices C11 and the use of an open-window gas discharge X-ray tube'has brought soft X-ray spectroscopy from being an

Detection of defects in weld radiograph imagesby using the Gradient Vector Flow active contour

Gradient Vector Flow (GVF) is an external force for active contour model which replaces the image force.We have chosen this model among many other models of active contours because

Detection of defects in weld radiograph images by using the Gradient Vector Flow active contour.

Abstract: In this paper we use the active contour gradient vector flow models for edge detection and segmentation of weld radiographic defects.. These models are

Region-based active contour with adaptiveB-spline. Application in radiographic weldinspection

The proposed split and merge strategy on the spline model consists in : adding a new control point when CSL is greater than a certain splitting threshold so that the contour tracks

X-Ray image restoration in the wavelet domain

In many systems, the observed image can result from the convolution of the true image and the point spread function (PSF) contaminated by noise from various sources. The goal of

Parametric active contour for boundaryestimation of weld defects in radiographic testing

In this approach we exploit the performance of the GVF as external force and enhance it by joining to it external adaptive pressure forces which bring speed to the snake evolution

Parametric active contour for weld defects boundary extraction in radiographic testing

In this approach we exploit the performance of the GVF as external force and enhance it by joining to it an external adaptive pressure forces which speeds up to the snake

T Forces Association-Based Active Contour

After we tried snakes where we have associated first the adaptive pressure force and the gradient forces then the adaptive pressure forces and the GVF ones, and at late the