• Aucun résultat trouvé

Preface The NAT operation described in this document extends address translation introduced in RFC 1631 and includes a new type of network address and TCP/UDP port translation

N/A
N/A
Info
Télécharger
Protected

Academic year: 2022

Partager "Preface The NAT operation described in this document extends address translation introduced in RFC 1631 and includes a new type of network address and TCP/UDP port translation"

Copied!
16
0
0

Chargement.... (Voir le texte intégral maintenant)

Texte intégral

Références

Télécharger maintenant ( PDF - 16 Page - 23.01 KB )

Documents relatifs

Preface This document combines the idea of address translation described in RFC 1631 with real-time load share algorithms to introduce Load Share Network Address Translators(or, simply LSNATs)

LSNATs, on the other hand, initiate translations on inbound sessions, by binding each session represented by a tuple such as (client address, client TU port, virtual

This document defines the process for generating a link-local address, the process for generating site-local and global addresses via stateless address autoconfiguration, and the Duplicate Address Detection procedure

o If a node performing Duplicate Address Detection discards received packets having the same source link-layer address as the receiving interface, it will also

Network Address Translators (NATs) attempt to provide transparent routing between hosts in disparate address realms of the same routing class

DNS Application Level Gateway (DNS_ALG) residing on NAT device will intercept the DNS packets directed to or from the DMZ name server(s) and perform transparent

Abstract In light of the growing interest in, and deployment of network address translation (NAT) RFC-1631, this paper will discuss some of the architectural implications and guidelines for implementations

Finally, while the port multiplexing variants of NAT (popular because they allow Internet access through a single address) work modestly well for connecting private hosts

The autoconfiguration process includes generating a link-local address, generating global addresses via stateless address autoconfiguration, and the Duplicate Address Detection procedure to verify the uniqueness of the addresses on a link

o If a node that is already using a particular IP address discards received packets that have the same link-layer source address as the interface, it will also

We document the concerns arising from revealing a Home Address to an onlooker and from disclosing a Care-of Address to a correspondent

Hence, the location privacy problem is particularly applicable when Mobile IPv6 route optimization is used or when reverse tunneling is used without protecting the inner IP

For reducing the IP address configuration latency, the document proposes that the new Care-of Address is always made to be the new access router’s IP address

In response to a handover trigger or indication, the mobile node sends a Fast Binding Update message to the Previous Access Router (PAR) (see Section 5.1).. Depending on

Abstract This document specifies requirements for a for a Network Address Translator (NAT) and a Network Address Port Translator (NAPT) that support Any Source IP Multicast or Source-Specific IP Multicast

The NAT device will subsequently receive an IP multicast data packet on the ’outside’ interface and forward the IP multicast packet to the ’inside’ interface(s) based on