• Aucun résultat trouvé

Numerical study of heat transfer in a multilayerwall

N/A
N/A
Protected

Academic year: 2021

Partager "Numerical study of heat transfer in a multilayerwall"

Copied!
1
0
0

Texte intégral

(1)

2ÈME CONFÉRENCE INTERNATIONALE SUR L’ÉNERGÉTIQUE APPLIQUÉE ET LA POLLUTION (CIEAP’2014)

2014

Numerical study of heat transfer in a multilayer wall

Sofiane Boulkroune, Mohamed Chaour, Mounira Bourebia, Djoubeir Debbah, M.tayeb Abed ghars, kahalerras Mounir

Abstract : We proposed a study digital, by finite difference, heat transfer in a multilayer wall (three layers) subjected to radiation condition on the inner side and taking into account the exchange of heat by conduction, convection on both sides. The operation of the digital code is developed on cases related to the problem in the ovens. The numerical results are shown examples of materials used in a cupola furnace in real conditions of functioning (fluxes, losses convectives, etc). They also analyse, the influence, on the transfer of warmth, some key parameters of the system as the choice of materials, the optimization of their thickness and also the variable nature of the flow.

Keywords : Heat transfer, cupola, Heat Insulation.

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Documents relatifs

The increase of the outer insulation multilayer panel temperature (T3) is only of 8°C. This highlights RMF interest to reduce the solar irradiation impact.. 13 Finally,

We proposed a study digital, by finite difference, heat transfer in a multilayer wall (three layers) subjected to radiation condition on the inner side and taking into account

But it is necessary to study the influence of communication among cavities as well as heat transfer in the ruptures and their consequences on the thermal resistance of the wall.. In

Keywords: Thermal Energy Storage, Phase Change Material, Convective Heat Transfer

In order to evaluate the level of turbulence modelling necessary to accurately reproduce the flow physics at three (3) different Reynolds numbers (3,000, 10,000 and 30,000), four

To know the contribution of all heat transfer modes taking place in the reactor, in the domain of high temperatures, we have tried to determine then by

Special emphasis is given to detail the effect of the Rayleigh number and blocks height on the heat transfer and the mass flow rate generated by natural convection.. 577

Numerical simulation of conjugate heat transfer and surface radiative heat transfer using the P 1 thermal radiation model: Parametric study in benchmark cases.. Carlo Cintolesi,