Chemical Sensor Array Modeling: Application to Resistive Based Chemo Sensors

This kind of equations is known in the thermodynamic of miscellaneous as equations of Gibbs–Duhém Keywords : adsorption, chemical sensors, sensor array, mixture of vapors,

These equations of state relate the variation of partial molar intensive quantities (as the change of the sensor molar partial sensitivity or molar adsorptions enthalpy), to gas

By using the Gibbs Duhem formalism, equations of state in differential form that link the variations of the sensors partial sensitivities to the gas component concentrations

By using the Gibbs Duhem formalism, equations of state in differential form that link the variations of the sensors partial sensitivities to the gas component concentrations

Abstract - This paper presents a modeling of intelligent sensors based on a representation of the sensor by services it uses or it proposes, and by its USer Operating Modes

By changing the angle of inclination 8 of the incident laser beam with a fixed PSD surface angle rp, the reflected laser spot on the PSD surface moves causing a change

Using quantum chemical methods in combination with basic spectroscopic experiments, we addressed two aspects of designing molecular sensors for cations, namely, the

This method proposes to complement low-cost inertial sensors commonly used in navigation techniques (accelerometers and gyroscopes [5], [2]) with a specific device consisting of