• Aucun résultat trouvé

Proposed Traceable Structural Resolution Protocols for 3D Imaging Systems

N/A
N/A
Protected

Academic year: 2021

Partager "Proposed Traceable Structural Resolution Protocols for 3D Imaging Systems"

Copied!
10
0
0

Texte intégral

Figure

Figure 2. SG-series laser line scanner mounted on a translation stage
Figure 3. (a) Resolvability and (b) edge width of an SG-102 laser line scanner at 0.10 millimeters inter-line separation.
Figure 4. (a) CAD model of material measure designed by NRC. (b) Photograph of material measure.
Figure 5. (a) Example of a range image in Polyworks after sphere selection and labeling
+2

Références

Documents relatifs

However, our approach is aimed at offering a complementary guid- ance to help, in the future, deciding if a conotoxin or a group of conotoxins deserve a superfamily name: (i) since

Ammann for Financial Market Research, I take the opportunity to thank the numerous people who have contributed to the success of this journal: our authors, referees, editorial

It has been shown that T-elevation after intravascular injection of a small bupivacaine test dose is caused by epinephrine and not by bupivacaine.. The aim of this study was

ESH–ESC 2007, Guidelines for the Management of Arterial Hypertension; ESH–ESC 2009, Reappraisal of European guidelines on hypertension management; CHEP, The 2010 Canadian

For each signal recording we can fit the theoretical curve by adjusting four parameters : the metastable yield when the laser is off resonance, the light power P, the

Table 1 summarizes the data on already reported linear triblock terpolymers in the literature [ 23 – 74 ], and, more specifically, block sequence, number (or weight) average

Secondly, complexity theory problematics will be considered: while the nilpotency problem in the semiring we study is undecidable in general, it will appear that certain

Then with each shared FMSO set as root FMSO set, we found all the compound FMSO sets ϕ ∈ Φ c for the RO system as if a global model is not available: Algo- rithm 4.1 obtain the