• Aucun résultat trouvé

Structural characterisation and antibacterialactivity ofPP/HDPE/TiO2-clay nanocompositesprepared by reactive extrusion

N/A
N/A
Protected

Academic year: 2021

Partager "Structural characterisation and antibacterialactivity ofPP/HDPE/TiO2-clay nanocompositesprepared by reactive extrusion"

Copied!
1
0
0

Texte intégral

(1)

7th African Conference on Non Destructive Testing ACNDT 2016 & the 5th International Conference on NDT and Materials Industry and Alloys (IC-WNDT-MI)

2016

Structural characterisation and antibacterial activity ofPP/HDPE/TiO2-clay nanocomposites

prepared by reactive extrusion

H. Kouadri, O. Bouriche, F.djarboua

Abstract : Compatible blends of polypropylene(PP)/hight density polyethylene (HDPE)were prepared byreactive blending in the presence of dicumyl peroxide (DCP)anhidride malic (MAH). The blends were characterized usingdifferent techniques: dynamical rheological analysis (DRA),differential scanning calorimetry (DSC), optical microscopy(OM) and scanning electron microscopy (SEM), dynamicalmechanical thermal analysis (DMTA), and impact strength, toevaluate their properties. The antibacterial properties ofPP/HDPE/TiO2-clay nanocomposites on E. coli Bacillus subtilisand S. aureus have been studied.

Keywords : pp, ( dcp ), nanocomposite, antibacterial properties

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Documents relatifs

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

The results obtained by the DSC for the stretched film shows the appearance of a broad peak of crystallization around 120 °C, a rise in melting peak in a significant way, which

the results obtained by the DSC for the stretched film shows the appearance of a broad peak of crystallization around 120 ° C, a rise in melting peak in a significant way, which

The morphological, thermal and structural studies were followed by electron scanning microscopy (MEB), differential scanning calorimetry (DSC/ATG) and X-ray diffraction (XRD) using

The morphological, thermal and structural studies were followed by electron scanning microscopy (MEB), differential scanning calorimetry (DSC/ATG) and X-ray diffraction

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

Abstract - The emissive modes of secondary and backscattered electrons in a scanning electron microscope work more quantitave- ly for material and topographic contrasts and

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des