• Aucun résultat trouvé

Machining Science and Technology

N/A
N/A
Info
Télécharger
Protected

Academic year: 2022

Partager "Machining Science and Technology"

Copied!
1
0
0

Chargement.... (Voir le texte intégral maintenant)

Texte intégral

(1)

-or

Machining Science and Technology

CONTENTS Volume 12, Number 4 2008

MECHANICAL DRILLING PROCESSES FOR TITANIUM ALLOYS: A LlTERATURE REVIEW 0 P. F. Zhang, N. J. Churi,

Z. J. Pei, and C. Treadwell 417

EFFECT OF COOLANT PRESSURE, NOZZLE DIAMETER,

IMPINGEMENT ANGLE AND SPOT DISTANCE lN HIGH PRESSURE COOLINGWITH NEAT OIL lN TURNING Ti-6AI-4V0 A. K. Nandy

and S. Paul 445

INFLUENCE OF FRICTION AND PROCESS PARAMETERS ON THE SPECIFIC CUTTING FORCE AND SURFACE CHARACTERISTICS lN MICROCUTTING0 M. Weber, H. Autenrieth, J. Kotschenreuther,

P. Gumbsch, V. Schulze, D. L6he, and J. Fleischer 474 NUMERICAL AND EXPERIMENTAL INVESTIGATION

OF LASER-ASSISTEDMACHININGOF INCONEL718 0 B. Shi,

H. Attia, R. Vargas, and S. Tavakoli 498

AN INNOVATIVE CONCEPT AND ITS EFFECTS ON WHEEL SURFACE TOPOGRAPHY lN DRY GRINDING BY RESIN AND VITRIFIEDBOND CBN WHEEL0 Taghi Tawakoli and Mohammad

Rabiey 514

SURFACE ROUGHNESS PARAMETERS OPTIMIZATION lN MACHINING A356/SiC/20p METAL MATRIX COMPOSITES BY PCD TOOL USING RESPONSE SURFACE METHODOLOGY AND DESIRABILITYFUNCTION0 K. Palanikumar, N. Muthukrishnan,

and K. S. Hariprasad 529

AXIS-BASED LOOK-AHEAD INTERPOLATOR FOR MACHINING OF SURFACES REPRESENTEDBY NURBS CURVES 0 Shen Hongyao,

Fu ]ianzhong, and Chen Zichen 546

(Cantinued an inside back Gaver)

Il 1111111111 1 1 Q Taylor&Francis

~

Taylor&FrancisGroup

10910344(2008)12(4)

Références

Télécharger maintenant ( PDF - 1 Page - 461.09 KB )

Documents relatifs

Optimization of 5-axis high-speed machining using a surface based approach

For this purpose, the optimization of the tool axis orientations is performed using a surface model for the tool path which allows integrating kinematical limits of the machine

Effect of a combined machining/burnishing tool on the roughness and mechanical properties

Figure 12 shows the evolution of the residual stresses versus the depth be- low the machined and combined machined/treated surfaces obtained using the combined tool for a

Effect of roller burnishing parameters on roughness surface and hardness of steel S355J0 specimens by using response surface methodology

The main objective in this work is to determine a mathematical models statistically based on experimental design (response surface methodology) using central composite

Machining Scie.nce and Technology

EFFECTS OF COOLANT SUPPL Y METHODS AND CUTTING CONDITIONS ON TOOL LlFE lN END MILLING TITANIUM ALLOY 0

~Machining Science and Technology

INFLUENCE OF MACHINING PARAMETERS ON THE WHITE LAVER FORMATION PROCESS AND ITS CHARACTERISTICS lN TURNING OF HARDENEDSTEEL 0

Machining Science and Technology

PLANARIZA TION 0 Ruqin Zhang, Xiaoping Wang, Pranav Shrotriya, Rana Biswas, Ashraf Bastawros, and Abhijit

Machining Science and Technology

POLISHING MACHINE TOOL 0 Guilian Wang and YIqiang Wang WEAR STUDIES AND CUTTING TESTS OF Ti-AI-N-C. NANOCOMPOSITE COATINGS lN MILLING

Machining Science and Technology

SURFACE INTEGRITY CHARACTERIZATION AND PREDICTION lN MACHINING OF HARDENED AND DIFFICULT-TO-MACHINE ALLOYS: A STATE-OF-ART RESEARCH REVIEW AND ANALYSIS.. 0