• Aucun résultat trouvé

Architectural optimization of an epoxy-based hybrid sol–gel coating for the corrosion protection of a cast Elektron21 magnesium alloy

N/A
N/A
Info
Télécharger
Protected

Academic year: 2021

Partager "Architectural optimization of an epoxy-based hybrid sol–gel coating for the corrosion protection of a cast Elektron21 magnesium alloy"

Copied!
13
0
0

Chargement.... (Voir le texte intégral maintenant)

Texte intégral

Figure

Fig. 1. SEM image of the cast magnesium alloy after acid etching with 20 g/L of HNO 3 : (a) surface of the substrate; (b) cross-section (mode BSE); (c) EDX analyze for zirconium.
Fig. 4. Bode diagrams of the EIS spectra obtained for the bare magnesium substrate, and covered by the monolayer hybrid coating (M), after 1 h (a), 24 h (b) and 168 h (c) of immersion in a 0.05 M NaCl solution.
Fig. 5. SEM images of the cross-section of the bilayer hybrid coatings A–D.
Fig. 7. SEM images of the surface of the bilayer hybrid coatings A–D.
+5

Références

Télécharger maintenant ( PDF - 13 Page - 6.73 MB )

Documents relatifs