• Aucun résultat trouvé

Newapproachforthedamagemechanismsidentificationintheglass-epoxycomposites hal-00810704

N/A
N/A
Protected

Academic year: 2021

Partager "Newapproachforthedamagemechanismsidentificationintheglass-epoxycomposites hal-00810704"

Copied!
1
0
0

Texte intégral

(1)

hal-00810704

Proceedings of the Acoustics 2012 Nantes Conference, 23-27 April 2012, Nantes, France

New approach for the damage mechanisms identification in the glass-epoxy composites

A.Satour , S.Montrésor , M.Bentaharb , F.Boubeniderc and R. Elguerjouma

Technical and Scientific Research Center for Welding and Control, BP 64, Road of Dely Ibrahim, Cheraga, 16100 Algiers, Algeria

Uiversit´e du Maine, LAUM, CNRS, Universit´e du Maine, Avenue Olivier Messiaen, 72085, 72000 Le Mans, France

University of sciences and technology Houari Boumedienne, Laboratory of physics of materials B.P. 32 El Allia- Bab Ezzouar, 16111 Algiers, Algeria

[email protected]

The aim of this work is to introduce a new approach for clustering acoustic emission data occuring during the fracture process of glass fibre reinforced polymer (GFRP) plates. In particular, we have developed signal processing techniques based on continues wavelet transform (CWT) in order to isolate acoustic signature corresponding to each damage mechanism (fibre breakage, matrix cracking, etc.). Entropy criterion was used to provide selection of most significant wavelet coefficients of AE signals.

Models are established in the form of dictionaries, whose elements are the waveforms collected during specific experiments in which the created damage mechanisms are well known. Dictionaries should be used to classify acoustic emission signals recorded when polymer composites are under load.

Références

Documents relatifs

3 Number of boundary partners of project Number of boundary partners drawn in project network 4 Number of overall partners drawn Number of all partners drawn in project network

(1) Quantification of simulation errors w ith respect to time resolution: To quantify the errors in the prediction of the annual daylight availability w hich one incurs by

In the other hand our purpose is to demonstrate the potentiality of acoustic emission in understanding the damage mechanisms that occurs during a tensile test of polymer fibre

Abstract: In this contribution, continuous wavelet denoising technique is developed to enhancethe signal to noise ratio of acoustic emission (AE) signals.. The time–

In this contribution, continuous wavelet denoising technique is developed to enhance the signal to noise ratio of acoustic emission (AE) signals.. The time–frequency characteristics

Abstract : The aim of this work is to introduce a new approach for clustering acoustic emission data occurring during the fracture process of glass fibre reinforced polymer

Abstract : The aim of this work is to introduce a new approach for clustering acoustic emission data occuring during the fracture process of glass fibre reinforced polymer

Another example is Table 5 which gives an exhaustive list of non reflexive verbs taking tense auxiliary être in standard modern French.