• Aucun résultat trouvé

Physical and chemical analysis of the material cast of a prosthesis for tibia (morphology and DSC).

N/A
N/A
Info
Télécharger
Protected

Academic year: 2021

Partager "Physical and chemical analysis of the material cast of a prosthesis for tibia (morphology and DSC)."

Copied!
1
0
0

Chargement.... (Voir le texte intégral maintenant)

Texte intégral

(1)

METECH '16 / IV. International Metallurgical Engineering Conference 2016

Physical and chemical analysis of the material cast of a prosthesis for tibia (morphology and

DSC).

Nacira SASSANE, Khaled BOUBENDIRA, Abdeldjalil BENFOUGHAL, Mohamed BOULKRA, Boukhezar Skander.

Abstract : In this approach, we have shown the results of Scanning Electron Microscope characterization (SEM), Optical Microscopy and Differential Scanning Calorimetry (DSC). The prosthesis is a composite material consisted of an organic matrix reinforced by a glass fiber and perlon, prepared by a standard casting method under vacuum. All our results show us: -The microscopic analysis has a porous structure. -Furthermore, the optical micrography chows the arrangement of the fiber in the matrix.

-The result of Differential Scanning Calorimetry shows a glass transition (Tg).

Keywords : physical analysis, prosthesis for tibia, MEB, DSC, optical microscopy.

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Télécharger maintenant ( PDF - 1 Page - 7.72 KB )

Documents relatifs

Study of The Reliability of A Composite Used InThe Knee Prosthesis

Abstract: In orthopedic surgery, the effectiveness of the implants used, such as hip and knee prostheses, depends mainly on their geometries and the type of loading to which they

Study of The Reliability of A Composite Used In The Knee Prosthesis

KEYWORDS— Reliability analysis, critical stress intensity factor, crack length, load, reliability index..

Thermal analysis of aging of a matrix polymermaterial reinforced with a glass fiber.

And thanks to which we could determine the variation of an isotherm for different temperatures as a function of time.The experimental results obtained show that the time required

Study of the resilience of a compositematerialintended for the orthopedic prosthesis ofa tibia

Currently, composite polymer-matrix objects occupy animportant place in the aeronautics, automotive, medical industry etc……, for this purpose, we areinterested in the study of

Study of the resilience of a composite material intended for the orthopedic prosthesis of a tibia.

This study allowed us to study the evolution of the parameters to deduct by the test of impact Charpy as a function of temperature for a composite material intended for the

The death knells of mature technologies

market swings in the curve for residential fixed investment and the oscillations in the total sales. is remarkable (Note that we are looking specifically at the phases rather than

Precision measurement of the branching fractions of the 5p 2 P 1/2 state in 88 Sr + with a single ion in a micro fabricated surface trap

(Color online) Typical acquisition sequence used in a single detection cycle. a) Laser cooling (80 µs, both lasers are turned on). e) Measurement of the background signal N B..

Automated Verification of Shape and Size

To support automatic verification, we design a new entailment checking procedure that can handle well-founded inductive predicates using unfold/fold reasoning.. We have proven