Large-scale 3D random polycrystals for the finite element method: Generation, meshing and remeshing

Figure 4.11 shows how surface representation over Ω is achieved using the “direct projection” strat- egy, which corresponds to project the outside nodes to the closest point on

Recently, Natarajan et al., [38] and Ooi et al., [39] employed the scaled boundary finite element method over arbitrary polygons for linear elasticity and linear elastic

Neumann or Robin boundary conditions â First results with a mixed formulation Dynamic equation : heat equation. Michel Duprez Rule of the mesh in the Finite Element

One would suspect that filters with larger stop-band attenuations should be used to maintain a given fidelity (to the ideal mid-band phase shifter response) criterion

In addition, solitary, cnoidal, and dispersive shock waves are studied in detail using this numerical scheme for the Serre system and compared with the ‘classical’ Boussinesq system

Using univariate analysis of 16 electrophysiological parameters (AP meas- urements, passive properties, excitability, etc…) and multivariate analyses (AHC and PCA) of 8

Étant donné que la Suisse privilégie le maintien à domicile des personnes âgées pour préserver leur autonomie (LSDom ; K 1 06), il faut s’assurer de la

other hand, the authors in [16] worked on zero forc- ing and matched filter precodings by using eigenvalues distribution. The theoretical study is thus very complex because i)