Prediction of forming limits for porous materials using void-size dependent model and bifurcation approach

In this study, the parameter FSI was compared to critical values obtained for different boundary conditions and porous thicknesses to give an estimation of the

But such a good agreement would not be obtained for Tvergaard (2015a)’s simulations of initially elliptic cylindrical voids, since they evidence a large effect of the initial void

The quenching rate constant and the photoinduced formation of dihalogen radical anions via electron transfer between halides and the excited state of 1NN ( 3 1NN) were

The failure impact assessment rating is used in conjunction with the condition rating to provide a logical and systematic means for determining the priorities for subsequent

La métrologie peut utiliser plusieurs sources d’approvisionnement soit directement SNMP (mais on fait double emploi avec la supervision), soit les bases de données de la NMC,

Au terme de ce travail dont l’objectif était d’analyser la participation des acteurs dans le cadre de la gestion intégrée des écosystèmes à mangroves dans la péninsule de

In this work 2D structures made of ordered (OS) or disordered (DS) arrays of parallel cylinders of square cross sections were considered (see Fig 1a and d) with flow orthogonal to