MIN I MUM CONF I GURA TION-
SORT 14 PROGRAMS ARE GENERALIZED OBJECT SORT PROGRAMS CAPA8LE CF SORTING FIXED LENGTH, BLOCKED OR UNBLOCKED, RECORDS IN MOVE ~(CE
IN EITHER ASCENDING OR DESCENOING SEQUENCE. THEY WilL ACCEPT INPUT FROM CARCS, 1301 DISK STORAGE. OR MAGNETIC TAPE, AND Will WRITE THE FINAL OUTPUT ON 1301 DISK STORAGE OR TAPE. SORTING CAN BE CCNTROLLED BY AS MANY AS TEN CONTROL OATA FIELDS OF TOTAL LENGTH UP TO A MAXIMUM OF 189 CHARACTERS.
PROGRAM NO. 1460-SM-06S WIll PROCESS TAPES WITH NO LABELS CR IdTH IOCS TYPE B 80 CHARACTER IBM LABELS IA TAPE MARK CANNCT FOLLG.
LABELS/. THERE IS NO PROVISION FOR HANDLING NCN-STANDARD TAPE LABELS.
MINIMUM SYSTEM REQUIREMENTS- AN 8K 146C SYSTEM WIn-! ••• ONE 1301 DISK STORAGE MOOULE ••• 1402 CARD READ PUNCH ••• ONE 1403 PRINTER.
THE PRCGRAM CAN USE. IF AVAILABLE, UP TO FIVE 1301 DISK STCRAGE MODULES. ONE OR TWO MAGNETIC TAPE UNITS FOR INPUT 10UTPLT, AhD 12K OR 16K CORE STORAGE.
BASIC PROGRAM
MATERIAl--COCUMENTATION - PROGRAM WRITE-UP ••• OPERATING PROCEDl;RES •••
PROGRAM SPECIFICATIONS ••• TIMINGS MANUAL.
CARD DECKS - OBJECT DECK.
OPTIONAL PROGRAM MATERIAL-- SYSTEM LISTINGS ••• FLO. CHARTS
OPTICNAl MATERIAL DESIRED MUST BE ITEMIZED ON THE ORDER CARD. *M
1460-SM-069 I Bioi 1460 SORT 14 *101
ORCER THRCUGH LOCAL IBM BRANCE OFF ICE SPECIFY FILE NUMBER 1460-SM-069
SORT 14 PROGRAMS ARE GENERALIZED OBJECT SORT PROGRAMS CAPABLE CF SORTING FIXED LENGTH, BLOCK EO OR UNBLOCKED. RECORDS IN ~OVE MCCE IN EITHER ASCENDING OR DESCENDING SEQUENCE. THEY IdLL ACCEPT INPUT FROM CARCS. 1301 DISK STORAGE. OR MAGNETIC TAPE, AND .IlL WRITE THE FINAL OUTPUT ON 1301 DISK STORAGE OR TAPE. SGRTlNG CAN BE CCNTROLLED BY AS MANY AS TEN CONTROL DATA FIELDS CF TOTAL lENGTH UP TO A MAXIMUM OF 189 CHARACTERS.
PRCGRAM NO. 1460-SM-069 WILL PROCESS TAPES WITH NO lABELS CR wITH 120 CHARACTER IOCS TYPE A IBM STANDARD LABELS IA TAPE MARK MUST FOLLCW LABELS/. THERE IS NO PROVISION FOR HANDLING NON-STANDARD T APE LABELS.
MINIMUM SYSTEM REQUIREMENTS- AN 8K 1460 SYSTEM ~I TH ••• ONE 1301 DISK STORAGE MODULE ••• 1402 CARD READ PUNCH ••• ONE 1403 PRINTER.
THE PROGRAM CAN USE. IF AVAILABLE. UP TO FIVE 1301 DISK STORAGE MCDULES. ONE OR TWO MAGNETIC TAPE UNITS FOR INPUTIOUTPU, 11.1'<0 12K CR· 16K CORE STORAGE.
BASIC PROGRAM
MATERIAL--COCUMENTATION - PRCGRAM WRITE-UP ••• OPERATING PROCEDURES •••
PROGRAM SPECIFICAT IONS ••• TIMING MANUAL.
CARD DECKS - OBJECT DECK.
OPTIONAL PROGRAM MATERIAL-- SYSTEM LISTINGS ••• FLO~ CHARTS.
OPTICNAL MATERIAL DESIRED MUST BE ITEMIZEO ON THE CRDER CARC. *M
1460-SV-090 1460-1070 PROCESS
COMMUNICATION MONITOR FOR 1401 AUTOCODER ION TAPEI ORDER THROUGH LOCAL IBM BRANCH OFFICE SPECIFY FILE NUMBER 1460-SV-090
A-1460 CONTINUED FRCM PRIOR
CCLUMN--THE IBM 1460-1070 PCM, CONSISTS OF A SET OF 1401 AUTOCCDER ION TAPEI LIBRARY ROUTINES. USED TO GeNERATE PROCESS COMMUNICAT ION PROGRAMS OR IENTED TO MEET THE
RECUIREMENTS OF THE 1070 PROCESS COMMLNICATION SYSTEM. THE ROUT INES
ARE-- MC~ITOR ROUTINE - CONTROLS THE HANDLING OF INTERRUPTS AND SCHEDULING OF LINE OPERATIONS ON A PRIORITY BASIS. IT SIMULATES A REAL-TIME CLOCK AND UP TO NINE INTERVAL TIMERS.
IN ADDITION. IT INFORMS OF ERRORS DETECTED. AND RECCROS THE STATUS OF THE LINES AND OF THE REMOTE SYSTEMS.
- CONVERSION SUBROUTINE - CALIBRATES THE ADC OF 1070 SYSTEMS AND CONVERTS ADC READ INGS TO A STANDARD RANGE.
- DELTA/LIMIT ChECK SUBROUTINE - PERFGRMS LIMI T ANDICR CEllA CHECKS ON CONVERTEC ADC READINGS.
- CONTACT SENSE SUBROUT INE - COMPARI:S CURRENT CONTACT SENSE REAOINGS WITH A MASTER MASK OR WITH PREY IOUS REAC INGS.
- THERMOCCUPLE SUBROUT INE - GENERATES TEMPERATURE VAllJES FRCM CONVERTED ThERMOCOUPLE READINGS.
- ERROR LOCATING ROUTINE - PERFORMS OUTPUT CHECKS ON TRANSMISSION LINES AND REMOTE SYSTEMS.
THE PROGRAM IS USED IN CONJUNCT ION wi TH 1401 AUTOCCDER leN TAPE/. THE PCM IS INSERTED IN THI: LIBRARY DURING A LIBRARY RUN AND CALLED BY MACRO-INSTRUCTIONS IN THE USERS PROGRAM. THE PCM CAN BE US~C IN CONJUNCTICN .ITH THE 1401 IOCS. A PRE-ASSEMBLY RUN IS REQLIRED TG TAILOR THE
PAGE 031
PCM TO THE USERS INSTALLATION AND REQUIREMENTS BEFORE ASSE~8LY WITH THE USERS PROGRAM.
MINIMUM SYSTEM CCNFIGURATIONS- ONLY ThOSE FEATURES REQUIRED BY 1401 AUTOCODER ION fAPEI ARE NEEDED .HEN ASSEMBliNG A PROGRAM US ING THE 1460-1C70 PCM. FOR A PRE-ASSEMBLY RUN AND FOR THt EXECUTION OF AN OBJECT PROGRAM USING THE PCM. ThE FOLLOWING IS REQUIRED- AN 8K 1460 SYSTEM WITH ••• 1447 CONSOLE, MODel 2 ••• INOEXING ANO STORE ADDRESS REGISTER ••• MULTIPLY-DIVIDE IFOR CONVERSION AND
THER~.OCOUPLE SUBROUTINES/ ••• ONE 1026 TRANSMISSION CONTRCl UNIT ••• INTERRUPT ••• TlME EMITTER.
BASIC PROGRAM I<ATERIAL
-DOCUMENTATION - PROGRAM WRI TE-UP •••
MACHINE READABLE - liBRARY ROUTINES AND PRE-ASSEMBLY OBJECT PRCGRA~ DECKS.
OPTI CNAL PROGRAM MATER IAl - PROGRAM LI STINGS ••• PROGRAM FLOWCHARTS.
NOTE- PROGRAM CECK MAY BE OBTAINED ON ONE REEL OF MAGNETIC T APE AS CARD IMAGES. CNL Y ONE REel IS REQU I RED I F ONE OR MCRE PROGRAI"S ARE ORDERED AT THE SAME TIME.
OPTICNAL MATERIAL REQUESTED MUST BE ITEMIZED ON THE ORDER CARC.
THE NUMBER OF TAPES INCICATED MAY BE GRDEREO FROM YOUR IBM REPRESENTATIVE OR SUPPLIED FOR EACH I TEM THAT IS ORCEREO.
THE TAPE PROVICED MUST BE 2400 FEET IN LENGTH.
1460-SV-091 1460-1070 PROCESS
COMMUNICATION MONITOR FOR 1401 BASIC AUTOCODER 2K ORDER THROUGH LOCAL IBM BRANCH OFF ICE SPECIFY FILE NUMBER 1460-SV-091
THE IBM 1460-1070 PCM, CONSISTS OF A SET OF 1401 BASIC AUTOCODER 2K ROUTINES, USEC TO GENERATE PROCESS COMMUNICATICr.
PROGRAMS ORIENTEC TO MEET THE REQUIREMENTS OF THE 1070 PROCESS COI(MUNICATION SYSTEM. THE ROUT INES
ARE-- MONITOR ROUTINE - CONTROLS THE HANDLING OF INTERRUPTS ANC SCHEDUliNG OF LINE OPERATIONS ON A PRIORITY BASIS. IT SiI'!ULATES A REAL-TIME CLOCK AND llP TO NINE INTERVAL TI~ERS.
IN ADO I TION, IT INFORMS OF ERRORS OETECTED, AND RECORDS THE STATUS OF THE LINES AND OF T~E kEMOTE SYSTEMS.
- CONYERS ION SUBROUTINE - CALIBRATES THE ADC OF 1070 SYSTEMS AND CONVERTS ACC REACINGS TO A STAND~RD RANGE.
- DELTA/LIMIT CHECK SUBROUT INE - PE~FORMS LIMIT ANC/OR DELTA CHECKS ON CorWERTED ACC REAOI NGS.
- CONTACT SENSE SUBROUTINE - COMPARES CURRENT CONTACT SENSE READINGS WITH A MASTER MASK OR wITH PREYICLS REACI"GS.
- THERMOCOUPLE SUBROUT INE - GENERATES TEMPERATURE VALUES FRCM CONVERTED THERMOCOUPLE READINGS.
- ERROR LOCATING ROUTINE - PERFORMS OUTPUT CHECKS ON TRANSMISSION LINES ANC REMOTE SYSTEMS.
THE PROGRAM IS USEC IN CONJUNCT ION WITh 1401 BASIC AUTOCODER 2K. A PRE-ASSEIolBLY RUN IS REQUIREC TO TAILOR THE PC~ TC THE USERS INSTALLATION AND REQUIREMENTS BEFORE ASSEMBLY WITH THE USERS PROGRAM.
~INI"UM SYSTEM CONFIGURATION- ONLY THOSE FEATURES RECLIRED BY 1401 BASIC AUTOCODER 2K ARE NtEeEO WHEN ASSEMBLING A PROGRAM USING THE 1460-1C70 PCM. FOR A PRE-ASSEMBLY RUN ANC FOR THE EXECUTION OF AN OBJECT PROGRAM USING THE PC~, THE FCLLOWING IS REQUIRCD- AN 8K 1460 SYSTEM wITH ••• 1447 CGNSCLE, HODEL 2 ••• INDEXING AND STORE ADDRESS REGISTER •••
MULTIPLY-DIVIOE IFOR CCNVERSION AND THERMOCOUPLE SUBROUTINES/ •••
CNE 1026 TRANS.HSSION CCNTROL UNIT ••• INTERRUPT ••• TIME EMITTER.
BASIC PROGRAM P'ATERIAl
-COCUMENTATION - PROGRAM WRI TE-IJP ••• SPEC I FICA TIONS "A~UAl •••
OPERAT ING PROCECURES MANUAL.
"ACHINE RE~CABlE - BASIC AUTOCODER 2K ROUTINES A"D A PRE-ASSEMBL Y OBJECT PROGRAI' DECK.
OPTICNAL PROGRAM MATERIAL - PROGRAM LISTINGS ••• PROGRAI' FLOWCHARTS.
NCTE- PROGRAM CECK MAY BE OBTAINED ON CNE REEL OF I'.AGNETIC TAPE AS CARD IMAGES. ONLY ONE REel IS REQUIRED IF ONE OR MORE PROGRAMS ARE ORDEREC AT THF SAMF TTMF.
OPTICNAl MATERIAL REQUESTEC MUST BE ITEMIZED ON THE CRDER CARD.
THE NU~BER OF TAPES INCICATED MAY BE GRDERED FROM YOUR IBI' REPRESENTATIVE OR SUPPLIED FOR tACH ITEM THAT IS GRDEREO.
THE TAPE PROVICtC MUST BE 2400 FEET IN LENGTH.
1401
1401-01.1.006 FULL MAST IFULL MINNEAPOLIS OF SPS-21 IREVISEDI
AVAILABLE 2ND QUARTER 1963.
SPECIFY FILE NUMBER 1401-Cl.l.006 AUTHOR ••• RICHARD T. FIRTKO
SYSTEMS ENGINEER IBM CORPORATION 1200 SECOND AVENUE SOUTt-MINNEAPOLIS 3, MINNESOTA DIRECT INGUIRIES TO AUTHOR
THIS PROGRAM IS A MODIFICATION OF THE 1401 SPS 11 ASSEMBLY PRCGRAM. IT W ILL HANDLE MULT IP LE PR06RAMS AUTOMA TlCALL Y FRO~
INPUT THROUGH POST-LIST AND PUNCHING, PERFORMING NECESSARY REITERATIONS WITHOUT INTERVENTION. NO SPECIAL DEVICES RE~UIRED. ALLOWS REASSEMBLY OF PREVIOUSLY ASSEMBLED PROGRAM;.
SENSE SWITCH SELECTION OF ONE PER CARD, SPS CONDENSED OR AUTOCODER CONDENSED OUTPUT. THE PROGRAM IS CONTAINED ON A SYSTEMS TAPE WITH SIMPLE MEMORY PRINT AND TAPE PRINT PROGRAMS TO PROVIDE A COMPACT TESTING PACKAGE. MACHINE CONFIGURATION-4K OR LARGER 1401, 1402, 1403 II I TH 10C OR 132 PR INT POS I T ICr.S, 3 TAPE UNITS 7330 OR 729, READ RELEASE - FOR MORE SPEED, IF AVAILABLE- SENSE SWITChES - FOR PUNCHING FLEXIBILITY, IF AVAILABLE. WRITE-UP CONTAINS MINOR CHANGES NECESSARY TO ELIMINATE THE RE~UIREMENT FOR REAO RELEASE ANO SENSE SId TCHES.
1401-01.1.013 TWO TAPE MINNEAPOLIS ASSEMBLY OF SPS TWO
AVAILABLE 4TH QUARTER 1962.
SPECIFY FILE NUMBER 1401-Cl.l.013 AUIHOR ••• RICHARO T. FIRTKO
IBM CORPORATION 1200 SECOND AVENUE SOUTH MINNEAPOLIS 3, MINNESOTA DIRECT INQUIRIES TO AUTHOR
THIS PROGRAM IS A MODIFICATION OF THE 1401 SPS 11 ASSEMBLY PROGRAM. IT WILL HANDLE MULT IPLE PROGRAMS AUTOMA TICALL Y FROM INPUT THROUGH POST LIST AND PUNCHING, PERFORMING NECESSARY REITERATIONS WIT~OUT INTERVENTION. NO SPECIAL DEVICES REQUIRED. THE PROGRAM IS CONTAINED ON A SYSTEMS TAPE WITH SIMPLE MEMORY PRINT AND TAPE PRINT PROGRAMS TO PROVIDE A COMPACT TESTING PACKAGE. MACHINE CONFIGURATION-1. 1401 WITH 4K OR LARGER MEMORY.
2. 1402.
3. 1403 WITH 100 OR 132 PRINT POSITIONS.
4. TWO TAPE UNITS 17330 OR 729/ •
• 5. READ RELEASE- FOR ADDED SPEED, IF AVAILABLE.
.6. SENSE SWITCHES- FOR PUNCHING flEXIBILITY, IF AVAILABLE •
• WRITE-UP CONTAINS MINOR CHANGES NECESSARY TO ELIMINATE THE REQUIREMENT FOR THESE CEV ICES.
1401-01.1.014 AUTOEDIT-1401 EDIT FOR 1410 AUTOCODER PROGRAMS
AVAILABLE 4TH QUARTER 1962.
SPECIFY FILE NUMBER 1401-01.1.014 AUTHOR ••• A. DUANE WILLS
ASSOCIATE SYSTEMS ENGINEER IBM CORPORATION
llO 1<. 21ST STREET NCR FOLK 17. VIRGINIA DIRECT INQUIRIES TO AUTHOR
PROGRAM TO EOIT 1410 PROGRAMS wRITTEN IN AUiOCODER.
CHECKS VALIDITY OF OPCCDES AND MACROS. SPREADS THE CPERANDS OF INSTRUCTIONS. COUNTS CORE USED BY
INSTRUCTIONS. PERFORMS SEVERAL MORE EDITING FUNCTIONS. 4K 1401 WITH ADVANCED PROGRAMMING PACKAGE, HI-LOW-EQUAL COMPARE, WITH 132 PRINT ING POSI TIONS.
1401-01.1.016 ACCELERATOR PACK - SYMBOLIC 4K PROGRAMMING SYSTEM ASSEMBLY
AVAILABLE 1ST QUARTER 1963.
SPECIFY FILE NUMBER 1401-01.1.016 AUTHOR ••• JACK NETTENSTROM
IBM
6252 EAST TELEGRAPH ROAC LCS ANGelES 22, CALIFORNIA DIRECT INQUIRIES TO AUTHOR
THE 4K ACCELERATOR PACK IS A PROGRAM FOR ASSEMBLING SPS PROGRAMS FOR 1.4-4K 1401S ON 4K CARD 1401S. IT WAS DEVelOPED TO elIMINATE THE PARTIALLY PROCESSED CARDS THAT ARE PUNCHED OUT DURING THE FIRST PASS OF SPS 1 AND 2.
SOURCE LANGUAGE 1401 SYMBOLIC PROGRAMMING SYSTEM.
EQUIPMENT SPECIFICATIONS- 4K ANY MODEL - NO SPECIAL FEATURES REQUIRED.
1401-01.1.017 14043
RAPID ASSEMBLY PROGRAM NO.
AVAILABLE 1ST QUARTER 1963.
SPECIFY FIlF NUMBER 1401-Cl.l.017 AUTHOR ••• C. LEROY BORSTAD
DIRECT INQUIRIES TO ••
CHARLES H. WILLIAMS U. S. BUREAU OF PUBL IC ROADS 610 EAST FIFTH STREET VANCOUVER. WASHINGTON
RAP WAS WRITTEN PRIMARILY TO ELIMINATE THE INTERMEDIATE PUNCHING OF CARDS WHEN ASSEMBLING SPS I I PROGRAMS ON A CARD INPUT-OUTPUT 1401 SYSTEM. PROVISICN ~AS MADE TO OBTAIN AN OBJECT LISTING, WITH OR WITHOUT AN OBJECT ONE-PER-CARD DECK AND WITH OR WITHOUT A CONDENSED DECK. AT THE TIME THE PROGRAM IS BEING ASSEMBLED. DUPLICATE LABELS ARE DETECTED
B-1401 CONTINUED FROM PRIOR
COLUMN--AND PRINTED OURING THE FIRST PASS COLUMN--AND AT CCNCLUSION OF THE SECOND PASS A DUMP OF LABELS AND ADDRESSES AND UNREFERENCED LABELS IS MADE. THE ONE-PER-CARD OBJeCT DECK MAY BE ASSEMBLED AS A SOURCE CECK AND MAY BE LISTED ~ITHOUT ASSEMBLY. A MNEMONIC OF EQU HAS BEEN ADDEO TO EQUATE A LABEL TO A LABEL PREVIGUSLY DEF INED. EQUIPMENT SPECIFICATIONS- 1401 CARD SYSTEM WITH ADVANCE PROGRAMING PACKAGE, PRINT CONTROL ADDITIONAL, HIGH-LOW-EQUAL COMPARE AND SENSE SW ITCHES.
PAGE 033
1401-01.1.018 TWO-TAPE AUTOCODER ASSEMBLY "M
FOR THE 1401.
AVAILABLE 4TH QUARTER 1965.
SPECIFY FILE NUMBER 1401-01.1.018 AUTHOR ••• R. B. ROSENBERGER OIRECT INQUIRIES TO ••
R.B. ROSENBERGER,IBM CORP. ,520 BOYLSTON ST. ,BOSTON 16, MASS. oM THIS PROGRAM WILL ASSEMBLE SOURCE PROGRAMS WRITTEN IN THE
1401 AUTOCODER LANGUAGE, WITh RESTRICTIONS OUTLINED BELOk, ON 1401 SYSTEMS WITH ONLY TWO TAPE UNITS. IT PROVIDES FOR UNLIMITED REITERATIONS, AND PRODUCES AN ASSEMBLY LISTING AND A PROGRAM CECK IN THE AUTOCODER CONOENSED FORMAT.
MACHINE CONF IGURAT
10N-1. 1401 WITH 4K OR LARGER STORAGE.
2. 1402.
3. 1403 WITH 132 PRINT POSITIONS.
4. TWO TAPE UNITS 1729 OR 73301.
5. H IGH/LOW/EQUAL CO~PARE FEATURE.
6. ADVANCED PROGRAMMING FEATURE.
SOURCE LANGUAGE - 1401 AUTOCOOER.
THE CNE REEL OF TAPE REQUIRED TO OBTAIN THE OPTIONAL SOURCE DECK .M MAY BE ORDERED FROM YOUR IBM REPRESENTATIVE OR SUPPLIED. THE TAPE PROV IDEO MUST BE 2400 FEET IN LENGTH.
OPTIONAL MATERIAL REQUESTEC MUST BE ITEMIZED ON THE ORDER CARD.
1401-01.1.020 EDIT IEDITING DATA INPUT FOR VAlIDITYI
AVAILABLE 1ST QUARTER 1963.
SPEC I FY FILE NUMBER 1401-01.1.020 AUTHOR ••• ReBERT M. JEWelL
SAN FRANC ISCO F INANC IAL DP DIV., NO. 393 420 MONTGOMERY STREET SAN FRANCISCO 4, CALIF.
DIRECT INQUIRIES TO AUTHOR
A PROGRAM FOR SCANNING CARCS AT 800 PER MINUTE FOR VALIDITY ERRORS- I.E., INYAlID MULTIPLE PUNCHES. USEFUL FOR CHECKING DATA FILES CONVERTEO AT TIME OF INSTALLATION OF A SYSTEM, DR FOR CHECKING TRANSACTION INPUT CARDS.
PREVENTS INTERRUPTIONS DURING JOB PROCESSING DUE TO PRESENCE OF INVALID PUNCHING THAT MAY EXIST IN CARDS- THE EDIT PROGRAM ICENTIFIES SUCH ERROR CARDS IN A PRIOR RUN, RATHER THAN HAVING THE CARDS CAUSE A MACHINE HALT DURING JOB PROCESSING. INVALID CARDS CAN BE IDENTIFIED IN VARI-OUS WAYS UNDER SENSE SWITCH CONTROL. CAN BE usee FOR CARD COUNTING IF NO OTHER MEANS IS AVAILABLE. CARD READ ERROR LATCH IS TESTEC FOR EACH CARD READ AND DESIRED ACTION. TAKEN ON ERROR CARDS ACCORDING TO SENSE SWITCH SETTINGS.
ASSEMBLED FOR 4K 1401, WITH MODEL 2 PRINTER AND SENSE
SWITCHES. CORE POSITIGNS 001 THRU 11B4 USED. LANGUAGE 1401 SPS.
1401-01.1.026 AUTOCODER PRE-liST DIAGNOSTIC
AVAILABLE 2ND QUARTER 1963.
SPECIFY FILE NUMBER 1401-01.1.026 AUTHOR ••• C. B. CARSTEN
IBM CORPORATION 1307 SOUTH BOULDER TULSA 19, OKLAHOMA DIRECT INQUIRIES TO AUTHOR
A PROGRAM FOR MAKING STACKED PRE-LISTS OF 1401 AUTOCODER SOURCE PROGRAM DECKS. THE PURPOSE IS TO PROVIClE A MEMO OF PRELIMIr.ARY CHECKING WHERE A 1401 TAPE SYSTEM MAY NOT BE AVAILABLE FOR PRELISTING AS A MEANS OF CHECKING PRIOR TO ASSEMBLY TO ATTEMPT LIMITING SOURCE DECK ERRORS. AN EDIT OF OPERATION CODES AND A MINOR EDIT OF OPERANDS IS TAKEN AND ERRORS ARE NOTED. IOCS CARDS ARE ACCEPTED. DISK, BINARY, CALL, INCLD AND ACTUAL INSTRUCTICNS ARE NOT HANDLED. THE RUN REQUIRES A 4K 1401 WITH HI-LO-EQUAL COMPARE AND SENSE SWITCHES- 1403 MODEL 2 PRINTER- AND 1402 MODEL 1 CARO READ PUNCH. THIS PROGRAM WRITTEN IN SPS HAS 678 SOURCE CARDS, IS PRIMARILY CARD TO PRINTER WITH FORMATTING OF OUTPlJT AND HAS BEEN TESTEC SUCCESSFULLY INNUMERABLE TIMES.
1401-01.1.030 SYMBOLIC LABEL CHECKING, ANY MACHINE S.P.S.
AVAILABLE 3RO QUARTER 1963.
SPECIFY FILE NUMBER 1401-01.1.030 AUTHOR ••• R.W. ALLPHIN
IBM CORP.
45 SOUTH MA IN STREET C[NCORD, NEW HAMPSH I RE DIRECT INQUIRIES TO AUTHOR
A PROGRAM FOR C,",ECKING SYMBOLIC LABELS USED IN AN S.P.S. SOURCE PRCGRAM. AT HE END OF PROCESSING, A LIST OF UNREFERENCED, UNDEFINED AND DUPLICATE LABELS IS PRINTED. 69 LABELS CAN BE CHECKED ON A 1.4 K MACH INE, 154 ON 2 K. 440 ON 4K, 1012 ON 8K, 1583 ON 12 K, AND 2154 ON 16 K. THIS PROGRAM, WHICH IS WRITTEN IN S.P.S., EXECUTES AT 400 TO 800 CARDS PER MINUTE. ANY 1401 MAY BE USEO.
PAGE 034 B-1401
1401-01.1.033 1401/1410 PRE-ASSEMBLY PROGRAM ED IT AND REFERENCE IPAPERI
AVAILABLE 1ST QUARTER 1964.
SPECIFY FILE NUMBER 1401-01.1.033 AUTHCR ••• LEN GREEN
IBM CORP DRAT ION 1049 ASYLUM AVENUE HARTFORD, CCNNECTICUT CIRECT INQUIRIES TO AUTHOR
PAPER IS A SERIES OF TEREE PROGRAMS. ITS PURPOSE IS TO DEVELCP AN ALPHABETIC LISTING OF SYMBOLIC NAMES AND THE INSTRuCTH!NS IN IIHICH THEY ARE USED FOR EACH SEGMENT OF tACH AUTOCODER STATE~ENT IN A PROGRAM. FOR USE PRIOR TO ASSEMBLY, All UNDEFINED LABELS IN THE PRGGRAM Will BE INDICATED ON THE LISTING. FeR USE IN TESTING AND PRCGRAM MAINTENANCE, THE LISTING .ILL PROVIDE A CROSS REFERENCE OF EACH SYMBOLIC NAME AND THE INSTRUCTIONS IN WHICH IT wAS USED. PROGRAM 1 ILABEL PROGRAMI IS A CARD-TO-TAPE PROGRA~,.
A TAPE RECORD IS OEVELCPED FOR EACH SEGMENT OF AN AUTOCODER STATEMENT- IT CONSISTS OF A SORT FIElD AND THE STATE~ENT. THE SORT FIELD CONTAINS THE SYMBOLIC NAME USED AND A CODE SPECIFYING THE USAGE OF TEE NAME. A PROGRAM LISTING, WITH SIJBSTITUTE CHARACTERS, ANC CARD SEQUENCE CHECKING OPTIONS ARE AlSC PART CF THE PROGRAM. PROGRAM 2 IS A TAPE UTILITY SORT PROGRAM FOR ANY COMPuTER. PROGRAM 3 IPRINT PRDGRAMI IS A TAPE- 10-PRINT PRCGRA".
THE LISTING IS IN COLLATING SEQUENCE, GROUPED BY EQUAL SYMBGLIC NAMES. SYMBOLIC NAMES T.,AT REFER TO IJNOEFINED LABELS ARE INDICATED. MACHINE CONFIGURATlON- 4K 1401, 1 TAPE, 1403 1 CR 2, ADVANCED PROGRAMMING, 1402, HI-LOW-EQLAL. MAY ALSO BE USED CN A 1410 SYSTEM.
1401-01.1.035 TAPE SYSTEM LOADER AVAILABLE 1ST QUARTER 1964.
SPECIFY FILE NUMBER 1401-01.1.035 AUTHORS •• RICHARD A. PESCEVICH
IBM CORP.
240 BROADWAY PATERSON, NEW JERSEY [;lRECT INCUIRIES'TO AUTHOR
THE TAPE SYSTEM LOADER PERMITS THE 1401 USER TO PLACE SEVERAL PRCGRA~S ON ONE SYSTEM TAPE. THE SYSTEM LOADER CAN-SELECT A PROGRAM FOR LOADING, ADD A NEW PROGRAM TO THE SYSTEM FRO!' CONDENSED CARDS OR FROM AUTOCODER LOADABLE TAPE, DELETE A PRCGRAM FROM THE SYSTEM, I I ST ALL THE HEADER CONTROL RECORDS OF THE PROGRA~S ON THE THE SYSTEM, PLACE ITSELF eN THE SYSTEM TAPE, AND DUPLICATE THE SYSTEM ONTO ANOTHER TAP<. REQUIRES AN 8K SYSTEI' WITH THE FEATURES AND EQUIPMENT FOR TAPE AUTOCDER. HCIoEVER, IT CAN BE EASILY MODIFIED FOR A 4K 14C1 BY CHANGING SEVERAL MODIFY ADDRESS INSTRuCTIONS. wRITTEN IN 1401 TAPE AUTCCCDER.
1401-01.1.036 SPSS - AN IMPROVEO SPS-ASSEMBLER
AVAILABLE 1ST QUARTER 1964.
SPECIFY FILE NUMBER 1401-C1.1.036 AUTHOR ••• H.J. KGEKKOEK
IBM 1401 USERS CLUB SYSTEMS DEPT.
P.O. BOX 9999
AI'STERDAM, ThE NETHERLANDS DIRECT I~~UIRIES TO AUTHOR
TWO PASS ASSEMBLY OF SPS SOURCE PROGRAI'S DIRECTLY INTC CONOENSEO CARDS. PRE-AND POSTLIST INCLUDED. NO RESTRICTIONS.
EXTENDED ERROR ChECKS. UNDEFINED, de. LABElS PRINTED AFTER PASS 1. 4K AffORDS POSSIBILITY FOR USAGE OF OVER 250 LABELS PER ITERATICN, 8K OF OVER 8CO. NO SPECIAL FEATURES NEEDED. 4K-8K-12K-16K, 1402, 1403.
1401-01.1.039 PRE-LIST FOR AUTOCODER SOURCE DECK
AVAILABLE 1ST QUARTER 1964.
SPECIFY FILE NUMBER 1401-Cl.1.039 AUTHOR ••• RCBERT STERN
IBM IISRAElI LTD.
P.O.B. 2881 TEL AVIV, ISRAEL DIRECT INQUIRIES TO AuTHOR
THIS PROGRAM WILL MAKE A THOROUGH CHECK ON AN AUTOCODER SOURCE DECK LISTING EACH STATEMENT AND PRINTING ANY ERRORS FCUND It-. THAT STATE~,ENT ON THE SAME LINE. IN ADCITICN THE PROGRAM .ILL PRINT AT THE END OF THE LISTING A SYMBOL TAilLE INDICATING UNDEFINED OPERANDS UNREFERENCED AND DUPLICABLE LABELS. IT WILL CHECK feR PAGEILINE OUT OF SE\JUENCE, INVALID LABEL, INVALID OPERATION, COLUI'N 19, FLAG ALL NON STANDARD MNEMLNICS AS MACRCS, TEST FOR ALL LGGICAl ERRORS IN Tf-.E OPERAND AND COMPARE COLUMNS 73 - 75 Te BLANK. IoRITTE~ IN AUTOCODER. REQUIRES 8K STORAGE, ADVANCEC PROGRAMMING ANC HIGH-LGW-EQUAL COMPARE.
1401-01.1.040 1401/1410 CROSS REFERENCE LISTING PROGRAM
AVAILABLE 1ST QUARTER 1964.
SPECIFY FILE NUMBER 1401-01.1.C40 AUTHOR ••• D.R. ANGELL
IEM CORP.
DEPT. 114 1701 NORTH ST.
ENDICOTT, N.Y.
CIRECT INQUIRIES TO ~UTHOR
B-1401 CONTINUED FRCM PRIOR
COLUMN--THIS IS AN 8K, 2 TAPE 1401 PROGRAM WHICH WIll PRODUCE A CROSS REFERENCE LIST ING OF LABELS AND All INSTRUCTIONS THAT REFEREr.CE THESE LABELS. REFERENCES MADE TO INDEX REGISTERS ARE ALSO LISTED. INPUT IS A 1401 OR 1410 AUTOCODER DECK. OPTIONS WILL PRODUCE A SEQUENCE CHECKED CARD IMAGE LISTING AND A LISTING OF All REFERENCES MADE TO NON-EXISTENT TAGS. THIS IS A VALUBLE TCOL FOR PRE-ASSEMBLY AUDIT, AS WELL AS PROGR~M CHANGING AND MAINTENANCE.
1401-01.1.041 PREASSEMBLY TEST FOR AUTOCODER SOURCE DECKS
AVAILABLE 2ND QUARTER 1964.
SPECIFY FILE NUMBER 1401-01.1.041 AUTHOR ••• W.J. BADKE, JR.
MCTOR VEHICLE DEPARTMENT STATE OFFICE BUILDING TOPEKA, KANSAS DIRECT INQUIRIES TO AUTHOR
THE PAT PROGRA~ WILL EDIT AND SEQUENCE 1401 AUTOCODER SOURCE DECKS, AND PROVIDE A LISTING FOR DESK-CHECKING. TWO PASSES OF THE SOURCE INFORMATION ARE REQUIRED TO 00 THIS. IN THE FIRST PASS, THE CARDS ARE WRITTEN eN rAPE, AND A LABEL TABLE IS DEVELOPED. DURING THE SECOND PASS, THE TAPE IS READ ANO A LISTING IS CREATED, SHOWING THE PUNCHED CARD INSTRUCTIONS or.
THE LEFT SIDE OF THE LISTING, AND A QUASIASSEMBLED LISTING ON THE RIGHT SlOE. ON THE RIGHT SIDE OF THE LISTING, PAGE AND LINE NUMBERS OF THE INSTRUCTION WHICH FIRST REFERENCED THE LABEL IN THE LABEL FIELD WIll BE SCBSTITUTED FOR THE LABEL. ANY ERRORS WHICH MAY OCCUR ARE NOTED, AND A COUNT IS ACCUMULATEC, WHICH IS PRINTED AT THE BOTTOM OF THE LISTING. LABELS IN TI'E OPERAND WHICH ARE FUNCTIONS OF AUTOCODER WILL BE NOTED AS IAUTc/. REFERENCES TO AREA DEFINING LITERALS WILL BE SUBSTITUTED BY THE PAGE AND LINE NUMBER OF THE INITIALIZING INSTRUCTION. ALL OPEN AND CLOSE INSTRUCTIONS WILL BE LABELED
THE LEFT SIDE OF THE LISTING, AND A QUASIASSEMBLED LISTING ON THE RIGHT SlOE. ON THE RIGHT SIDE OF THE LISTING, PAGE AND LINE NUMBERS OF THE INSTRUCTION WHICH FIRST REFERENCED THE LABEL IN THE LABEL FIELD WIll BE SCBSTITUTED FOR THE LABEL. ANY ERRORS WHICH MAY OCCUR ARE NOTED, AND A COUNT IS ACCUMULATEC, WHICH IS PRINTED AT THE BOTTOM OF THE LISTING. LABELS IN TI'E OPERAND WHICH ARE FUNCTIONS OF AUTOCODER WILL BE NOTED AS IAUTc/. REFERENCES TO AREA DEFINING LITERALS WILL BE SUBSTITUTED BY THE PAGE AND LINE NUMBER OF THE INITIALIZING INSTRUCTION. ALL OPEN AND CLOSE INSTRUCTIONS WILL BE LABELED