• Aucun résultat trouvé

EHCI Host Controller

Dans le document VMIVME-7807VME-7807RC* GE Fanuc Automation (Page 97-101)

Depending on how the operating system and the latest service pack were installed, the USB 2.0 controller driver may or may not be running. Visit

http://support.microsoft.com and search for Availability of USB 2.0 Support in Windows 2000 SP1, for more information on this topic.

To determine whether the driver for the USB 2.0 controller is running, right-click on

‘My Computer’, and select ‘Manage’. In the left pane of the ‘Computer Management’

window, click on ‘Device Manager’. In the right pane, click on the ‘+’ next to

‘Universal Serial Bus controllers’ to expand the group. If there is a ‘Standard Enhanced PCI to USB Host Controller’ listed in the group, the USB 2.0 EHCI Host Controller driver is already running, and no further configuration is necessary for the device.

If there is a device labeled ‘Universal Serial Bus (USB) controller’ under the ‘Other devices’ section in the right pane of the ‘Computer Management’ window, the driver has not been installed. To install the driver, right-click on the ‘Universal Serial Bus (USB) controller’ and select ‘Properties’ from the drop-down menu. ‘Next’ select the

‘Driver’ tab and select ‘Update Driver’. When the wizard starts, choose ‘Next’ and

‘Search for a suitable driver’ and ‘Next again’. The Hardware Update Wizard will find the appropriate driver and begin installation automatically. Click ‘Next’ as necessary then click ‘Finish’ and ‘Close’ to close the drivers properties dialog box. Device Manager will relocate the device to the ‘Universal Serial Bus controllers’ section in the right pane.

Ethernet Adapter Drivers Installation

1. If not already present, insert the Windows Drivers CD-ROM.

2. Right-click on ‘My Computer’, and select ‘Manage’. In the left pane of the

‘Computer Management’ window, click on ‘Device Manager’.

3. Intel(R) PRO/1000 MT Dual Port Server Adapter. Perform this step for each of the Ethernet controllers under the ‘Other devices’ section in the right pane of the

‘Computer Management’ window. Right-click on the ‘Ethernet Controller’ and select ‘Properties’ from the drop-down menu. Select the ‘Driver’ tab and select

‘Update Driver’. When the wizard starts ensure ‘Install the software

automatically’ is selected and click ‘Next’. The Hardware Update Wizard will find the appropriate driver and begin installation automatically. Click ‘Finish’.

Device Manager will relocate the devices to the ‘Network adapters’ section in

Microsoft Windows XP Professional Software Driver Installation

NOTE: Prior to installing device drivers, Windows XP should be updated to Service Pack 1a or later. Visit http://support.microsoft.com and search for the latest Service Pack information.

Video Driver Installation

1. If not already present, insert the Windows Drivers CD-ROM.

2. Click ‘Start’, ‘Run’, ‘Browse’. In the ‘Look in’ pull-down selection menu, select the CD-ROM drive. Double-click on the ‘Video’ folder. Double-click on

‘win2k_xp141’. Click ‘OK’.

3. At the ‘Intel(R) Extreme Chipset Graphics Driver Software’ window, click ‘Next’.

4. At the ‘Intel(R) Extreme Graphics 2’ window, click ‘Next’.

5. Click ‘Yes’ to agree to the software license agreement.

6. Ensure ‘Yes, I want to restart my computer now’ is selected and click ‘Finish’.

The computer will restart. The video resolution settings may be changed as desired.

NOTE: If only analog video is being used, ensure that ‘Monitor’ is selected as the default video device in the driver.

6300ESB (Hance Rapids) Chipset Software Installation

1. If not already present, insert the Windows Drivers CD-ROM.

2. Click ‘Start’, ‘Run’, ‘Browse’. In the ‘Look in’ pull-down selection menu, select the CD-ROM drive. Double-click on the ‘Hance Rapids’ folder. Double-click on the ‘Applications’ folder. Double-click on ‘infinst_enu’. Click ‘OK’.

3. At the ‘Intel Chipset Software Installation Utility’ window, click ‘Next’. Click

‘Yes’ to agree to the software license agreement. Click ‘Next’. At each of the following ‘Hardware Installation’ windows, click ‘Continue Anyway’.

4. Ensure ‘Yes, I want to restart my computer now’ is selected and click ‘Finish’.

The computer will restart.

D

VMIVME-7807/VME-7807RC Product Manual

USB 2.0 EHCI Host Controller

Depending on how the operating system and the latest service pack were installed, the USB 2.0 controller driver may or may not be running. Visit

http://support.microsoft.com and search for Availability of USB 2.0 Support in Windows XP SP1, for more information on this topic.

To determine whether the driver for the USB 2.0 controller is running, click ‘Start’, right-click on ‘My Computer’, and select ‘Manage’. In the left pane of the ‘Computer Management’ window, click on ‘Device Manager’. In the right pane, click on the ‘+’

next to ‘Universal Serial Bus controllers’ to expand the group. If there is a ‘Standard Enhanced PCI to USB Host Controller’ listed in the group, the USB 2.0 EHCI Host Controller driver is already running, and no further configuration is necessary for the device.

If there is a device labeled ‘Universal Serial Bus (USB) controller’ under the ‘Other devices’ section in the right pane of the ‘Computer Management’ window, the driver has not been installed. To install the driver, right-click on the ‘Universal Serial Bus (USB) controller’ and select ‘Update Driver’. Ensure ‘Install the software

automatically’ is selected and click ‘Next’. The Hardware Update Wizard will find the appropriate driver and begin installation automatically. Click ‘Finish’. Device

Manager will relocate the device to the ‘Universal Serial Bus controllers’ section in the right pane.

Ethernet Adapter Drivers Installation

1. If not already present, insert the Windows Drivers CD-ROM.

2. Click ‘Start’, right-click on ‘My Computer’, and select ‘Manage’. In the left pane of the ‘Computer Management’ window, click on ‘Device Manager’.

3. Intel(R) PRO/1000 MT Dual Port Server Adapter. Perform this step for each of the Ethernet controllers under the ‘Other devices’ section in the right pane of the

‘Computer Management’ window. Right-click on the ‘Ethernet Controller’ and select ‘Update Driver’. Ensure ‘Install the software automatically’ is selected and click ‘Next’. The Hardware Update Wizard will find the appropriate driver and begin installation automatically. Click ‘Finish’. Device Manager will relocate the devices to the ‘Network adapters’ section in the right pane.

4. Click ‘X’ to close the ‘Computer Management’ window.

5. Changes may be made to the network configuration as desired.

This page is intentionally left blank.

GE Fanuc Information Centers Additional Resources

Americas: For more information, please visit the

Dans le document VMIVME-7807VME-7807RC* GE Fanuc Automation (Page 97-101)

Documents relatifs