Mechanical resistance in liquid Lead-Bismuth of 316L/T91 welded by electron beam
4. Communications à des congrès, symposiums
[1] Serre I., Salazar D., Vogt J-B.
Etude et quantification par AFM de la plasticité cyclique d’un acier austéno- ferritique
Forum Microscopies à sonde locale 2009, Hardelot, France, 16-19 Mars 2009 Communication sous forme de poster
[2] Serre I., Vogt J-B.
Utilisation de la microscopie à force magnétique pour la détection et la quantification de phases magnétiques dans les aciers
Forum Microscopies à sonde locale 2009, Hardelot, France, 16-19 Mars 2009 Communication sous forme de poster
[3] Vogt J-B., Serre I, Verleene A.
Fatigue behaviour of a 9Cr1MoNb-V martensitic steel in liquid metal
Fatigue and plasticity from mechanisms to design JIP 2008, Paris, France, 20-22 May 2008
Communication sous forme de poster – avec publications dans actes
[4] Salazar D, Serre I., Vogt J-B.
LCF mechanisms of the 25Cr-7Ni-0.25N duplex stainless steel investigated by atomic force microscopy
Fatigue and plasticity from mechanisms to design JIP 2008, Paris, France, 20-22 May 2008
Communication orale – avec publications dans actes
[5] Vogt J-B., Serre I.
Liquid metal assisted damage of the T91 martensitic steel
Mechanical Testing for Next Generation Nuclear Systems, the JRC Institute for Energy in Petten, Netherlands, 17-18 April 2008
Communication sous forme de poster
[6] Serre I., Salazar D., Vogt J-B.
La microscopie à force atomique pour l’étude et la quantification de la plasticité d’aciers de structure
Forum Microscopies à sonde locale 2008, La Londe les Maures, France, 17-20 Mars 2008
Communication orale
[7] Salazar D, Serre I., Vogt J-B.
Atomic Force Microscopy used to study cyclic plasticity mechanisms in a Duplex Stainless Steel
Euromat, Nuremberg, Germany, 10-13 September 2007 Communication sous forme de Poster
[8] Serre I., Vogt J-B.
The risk of Liquid Metal Embrittlement of the T91 martensitic steel evidenced by Small Punch Test
Euromat, Nuremberg, Germany, 10-13 September 2007 Communication orale
[9] Salazar D., Serre I., Vogt J-B.
Using Atomic Force Microscopy to study cyclic plasticity mechanisms in a DSS-25Cr- 7Ni-0.25N
International & Expo DUPLEX 2007, Grado - Italy, 18-20 June 2007 Communication sous forme de poster – avec publications dans actes
[10] Vogt J-B., Verleene A., Serre I., Balbaud-Célérier F., Martinelli L., Terlain A. Liquid metal-assisted fracture of the T91 martensitic steel
SMINS: Structural Materials for Innovative Nuclear Systems : Developing synergies in materials science for innovative nuclear systems, Forschungszentrum Karlsruhe (FZK), Germany, 4-6 June 2007
Structural Materials for Innovative Nuclear Systems, NEA, pp 391-400 Communication sous forme de poster– avec publications dans actes
[11] Serre I., Vogt J-B.
Liquid Metal Embrittlement sensitivity of structural steels studied by Small Punch Test
IV Workshop on Materials for HLM-cooled Reactors and Related Technologies, Rome, Italy, 21-23 May 2007
Communication orale
[12] Auger T., Serre I., Lorang G., Hamouche Z., Gorse D., Vogt J-B.
Effect induced by PbBi and oxidation on crack initiation by Small Punch Test
IV Workshop on Materials for HLM-cooled Reactors and Related Technologies, Rome, Italy, 21-23 May 2007
Communication orale
[13] Salazar D., Serre I., Vogt J-B.
Le partage de la plasticité cyclique d’un acier Duplex étudié par analyse au microscope à force atomique
Forum Microscopies à sonde locale 2007, Aube – Forêt d’Orient, France, 26-29 Mars 2007
Communication orale
[14] Caestecker P., Serre I., Iost A., Vogt J-B.
Apport de la simulation numérique à l'essai de Small Punch Test Des Matériaux 2006 – Dijon, France ,13 au 17 Novembre 2006 Communication sous forme de poster – avec publications dans actes
[15] Van den BoschJ., Serre I., Vogt J-B., Almazouzi A.
Assessment of the Behavior of TIG and EB Welds of T91 and 316L in LBE
Eight International Workshop on Spallation Materials (IWSM-8), Taos, New Mexique, USA, 16-20 October, 2006
Communication orale
[16] Vogt J-B., Verleene A., Serre I.
Liquide metal-assisted fracture of T91 martensitic steel
Second International Conférence on Engineering Failure Analysis (ICEFA-2), Toronto, Canada, 12-15 September, 2006
Communication orale
[17] Serre I., Salazar D., Vogt J-B.
Etude du partage de la plasticité d’acier Duplex par microscopie à force atomique
Forum Microscopies à sonde locale 2006, Autrans, France, 27-31 Mars 2006 Communication orale
[18] Héripré E., Crepin J., Roos A., Serre I., Chaboche J-L.
Experimental and numérical study of pastic behaviour and crack propagation in gamma-based TiAl microstructures
EUROMECH-MECAMAT EMMC8 Paris, France, 13-15 September 2005 Communication orale – avec publications dans actes
[19] Salazar D., Serre I., Vogt J-B.
Etude du partage de la plasticité d'un acier inoxydable austeno-ferritique par microscopie à force atomique
Colloque Plasticité 2005, La Rochelle, France, 11-13 Avril 2005 Communication sous forme de poster
[20] Legris A., Vogt J-B., Verleene A., Serre I.
Wetting and mechanical properties, a case study: liquid metal embrittlement of a martensitic steel by liquid lead and other liquid metals
High Temperature Capillarity 4, Sanremo; Italy; March 31-April 3, 2004 Communication orale
[21] Vogt J-B., Serre I., Verleene A., Legris A.
Influence of liquid Pb-Bi bath on the mechanical properties of the T91 steel.
III International Workshop on Materials for Hybrid Reactors and Related Technologies, Rome, Italy, 13-15 October 2003
Communication orale
[22] Serre I., Bonnet M., Pradeilles Duval R.M.
Plan/plan sliding contact modelling by boundary element method
4th Euromech, Solid Mechanics Conference, Volume 2, p 309, Metz, France, June 2000 Communication orale
[23] Serre I., Celati N.
Modeling of contact between graphite and Ti6Al4V alloy or Ti6Al4V alloy reinforced TiC in seawater environment : tribology-corrosion tests with ring on disc tribometer, materials wear analysis
197ème Meeting of the Electrochemical Society, Volume 200-1, Toronto, Canada, May 2000
Communication orale
[24] Serre I., Celati N., Pradeilles Duval R.M.
Modélisation d’un contact plan/plan entre un graphite et du Ti6Al4V renforcé TiC : essais de tribocorrosion anneau/disque, analyse de l’usure des matériaux
Congrès national Mecamat, “frottement, surface, contact”, Aussois, France, Janvier 2000
Communication sous forme de poster
[25] Celati N., Lederer G., Serre I., Vaslin T.
Tribocorrosion d’un acier inoxydable en milieu marin artificiel
38èmes journées du cercle d’études des métaux, “ matériaux, usure et corrosion ”, Liège, Belgique, bulletin du Cercle d’Etudes des Métaux, tome 16, n°19, pp 8-1 à 8- 7, mai 1999
Communication orale – avec publications dans actes
[26] Serre I., Celati N., Pradeilles Duval R.M.
Modélisation d’un contact graphite contre Ti6Al4V renforcé TiC en milieu marin : essais de tribocorrosion plan / plan de type anneau / disque
38èmes journées du cercle d’études des métaux, “ matériaux, usure et corrosion ”, Liège, Belgique, bulletin du Cercle d’Etudes des Métaux, tome 16, n°19, pp 15-1 à 15-8, mai 1999
Communication orale – avec publications dans actes
5. Workshops
Workshops
[1] Vogt J-B., Serre I.
Role of wetting in liquid metal embrittlement occurrence of metallic alloys
3rd International Topical Seminar : Role of wetting in liquid metal embrittlement occurrence of metallic alloys “Coolants and Innovative Reactor Technologies” - Coolants: Wetting phenomena in liquid metals and their consequences on the operation of nuclear systems – Aix en Provence, France, 6-7 Juillet 2009
[2] Vogt J-B., Serre I.
Corrosion par Pb-Bi : les conséquences sur la résistance à la fatigue
Atelier GEDEPEON – les matériaux pour les Réacteurs de 4ème Génération – Aix en Provence, France, 16-17 Octobre 2008
[3] Vogt J-B., Serre I.
Fragilisation par les métaux liquides : caractérisation, protection, prévention
Atelier GEDEPEON – les matériaux pour les Réacteurs de 4ème Génération – Tours, France, 16-17 Octobre 2007
[4] Diop I., David N., Fiorani J-M., Podor R., Vilasi M., Serre I., Vogt J-B
Comportement à la corrosion des aciers rentrant dans la fabrication de MEGAPIE au contact du plomb ou de l’eutectique plomb-bismuth
Atelier GEDEPEON – les matériaux pour les Réacteurs de 4ème Génération – Tours, France, 16-17 Octobre 2007
[5] Vogt J-B., Serre I.
Liquid Metal assisted damage of structural steels in ADS components
Atelier GEDEPEON Accelerator Driven System – Aix en Provence, France, 18-19 Mai 2006
[6] Salazar D., Serre I., Vogt J-B.
Study of Cyclic Deformation of High Nitrogen Duplex Stainless Steels
Topical day on Corrosion Fatigue – CEFRACOR – Talence, France, 9 Septembre 2005
[7] Auger T., Gorse D., Vogt J-B., Serre I., Almazouzi A., Sapundjiev D., Van den Bosch J., Dai Y., Long B., Konys J., Fazio C., Gessi A.LME and fatigue of T91 steel in LBE: a review
MEGAPIE Technical Review Meeting 2005 SCK-CEN – Mol, Belgium, 27-29 june 2005
[8] Serre I., Verleene A., Legris A., Vogt J-B.Mechanical properties of the T91 steel in liquid metals (tensile and fatigue tests)
OECD-NEA, Paris, France, September 23-24, 2004
[9] Vogt J-B., Legris A., Verleene A., Guittier G., Serre I. Fatigue behaviour of the T91 martensitic steel in liquid Pb-Bi
MEGAPIE Technical Review Meeting 2004 Subatech – Nantes, France, 24-26 May 2004
[10] Vogt J-B., Legris A., Verleene A., Guittier G., Serre I. Fatigue experiments on T91 steel in Pb-Bi
MEGAPIE Technical Review Meeting 2003, Paris, France,18-19 March 2003