LISTE DE RÉFÉRENCES BIBLIOGRAPHIQUES
Abdoulaye, B. (2010). L'intégration des stratégie de maintenance à la gestion des opérations des systèmes manufacturiers. Mémoire de maîtrise électronique. École de Technologie Supérieure, Montréal.
Aromaa, S., Väätänen, A., Aaltonen, I., & Heimonen, T. (2015). A model for gathering and sharing knowledge in maintenance work. Paper presented at the Proceedings of the European Conference on Cognitive Ergonomics 2015.
Association, C. S. (2012). CSA Standard Z1004-12, Workplace Ergonomics–A Management and Implementation Standard : Mississauga, ON: CSA.
Babson, S. (1993). Lean or mean: The MIT model and lean production at Mazda. Lab. Stud. J., 18, 3.
Baluch, N., Abdullah, C. S., & Mohtar, S. (2012). TPM and lean maintenance–A critical review. interdisciplinary journal of contemporary research in business, 4(2), 850- 857.
Barabady, J., & Kumar, U. (2008). Reliability analysis of mining equipment: A case study of a crushing plant at Jajarm Bauxite Mine in Iran. Reliability engineering & system safety, 93(4), 647-653.
Beaulieu-Paré, N. (2011). Une méthode pour l'implantation et le maintien du Lean dans les entreprises manufacturières québécoises. École de technologie supérieure.
Bird, F. E., & Germain, G. L. (1996). Practical loss control leadership : Det Norske Veritas (USA).
Blackburn, C., & Tétreault, S. (2011). Gestionnaire, un métier à découvrir (Vol. 1): Éditions BLACKBURN TÉTREAULT.
Bruère, S. (2013). Les liens entre le système de production lean manufacturing et la santé au travail: une recension de la littérature. Revue multidisciplinaire sur l'emploi, le syndicalisme et le travail, 8(1), 21-49.
CNESST. (2018).
http://www.csst.qc.ca/lois_reglements_normes_politiques/Pages/lois_reglements_corr espondants.aspx.
Desjardins-David, I., & Arteau, J. (2009). Méthodologie d’analyse des solutions SST pour convaincre les différents intervenants. Revue Internationale sur l’Ingénierie des Risques Industriels, 2(1).
Dhillon, B. S. (2003). Engineering safety: fundamentals, techniques, and applications (Vol. 1): World Scientific Publishing Co Inc.
Emami-Mehrgani, B., Nadeau, S., & Kenné, J.-P. (2014). Optimal lockout/tagout, preventive maintenance, human error and production policies of manufacturing systems with passive redundancy. Journal of Quality in Maintenance Engineering, 20(4), 453-470. Emami-Mehrgani, B., Neumann, W. P., Nadeau, S., & Bazrafshan, M. (2016). Considering human error in optimizing production and corrective and preventive maintenance policies for manufacturing systems. Applied Mathematical Modelling, 40(3), 2056- 2074.
Flynn, J. R., & Vlok, P. (2015). Lean Approaches in Asset Management Within the Mining Industry 9th WCEAM Research Papers (pp. 101-118): Springer.
Hancock, D. R., & Algozzine, B. (2016). Doing case study research: A practical guide for beginning researchers : Teachers College Press.
Hasle, P. (2014). Lean production—an evaluation of the possibilities for an employee supportive lean practice. Human Factors and Ergonomics in Manufacturing & Service Industries, 24(1), 40-53.
Helman, J. (2012). Analysis of the potentials of adapting elements of Lean methodology to the unstable conditions in the mining industry. AGH Journal of Mining and Geoengineering, 36(3), 151-157.
Jarebrant, C., Winkel, J., Johansson Hanse, J., Mathiassen, S. E., & Öjmertz, B. (2016). ErgoVSM: A Tool for Integrating Value Stream Mapping and Ergonomics in Manufacturing. Human Factors and Ergonomics in Manufacturing & Service Industries, 26(2), 191-204. doi:10.1002/hfm.20622
Jogulu, U. D., & Pansiri, J. (2011). Mixed methods: A research design for management doctoral dissertations. Management research review, 34(6), 687-701.
Julien, B. (2006). Modélisation des meilleures pratiques pour l'évaluation des entreprises. École de technologie supérieure.
Kyriakidis, E., & Dimitrakos, T. D. (2006). Optimal preventive maintenance of a production system with an intermediate buffer. European journal of operational research, 168(1), 86-99.
Laloux, G. (2009). Management de la maintenance selon l'ISO 9001: 2008 : AFNOR éditions.
Landsbergis, P. A., Adler, P. S., Babson, S., Johnson, J., Kaminski, M., Lessin, N., . . . Richardson, C. (1999). Lean production and worker health: A discussion. NEW SOLUTIONS: A Journal of Environmental and Occupational Health Policy, 8(4), 499-523.
Lescure, E., Nadeau, S., & Morency, F. (2015). PME et SST: Quand la résilience est un modèle d’affaires.
Liker, J. (2004). The Toyota way: 14 management principles from the world’s greatest manufacturer. McGraw-Hill. Retrieved November, 6, 2011.
Lind, S. (2008). Types and sources of fatal and severe non-fatal accidents in industrial maintenance. International Journal of Industrial Ergonomics, 38(11–12), 927-933. Linderman, K., Schroeder, R. G., Zaheer, S., & Choo, A. S. (2003). Six Sigma: a goal-
theoretic perspective. Journal of Operations Management, 21(2), 193-203. doi:http://dx.doi.org/10.1016/S0272-6963(02)00087-6
Longoni, A., Pagell, M., Johnston, D., & Veltri, A. (2013). When does lean hurt?–an exploration of lean practices and worker health and safety outcomes. International Journal of Production Research, 51(11), 3300-3320.
Manirabona, A. (2010). La négligence criminelle en milieu de travail: pour une application cohérente des nouvelles dispositions du Code criminel. Revue générale de droit, 40(2), 467-504.
Marlow, S., & Patton, D. (2002). Minding the gap between employers and employees: the challenge for owner-managers of smaller manufacturing firms. Employee Relations, 24(5), 523-539.
Micheli, G. J., & Cagno, E. (2010). Dealing with SMEs as a whole in OHS issues: warnings from empirical evidence. Safety Science, 48(6), 729-733.
Nadeau, S., & Morency, F. (2018). De-icing of aircraft: incorporating business risks and occupational health and safety. Disaster Management, 151.
Nadeau, S., Morency, F., & Nsangou, J. (2015). Le lean mining et les défis associés à la SST. Papic, L., & Kovacevic, S. (2016, 15-18 Feb. 2016). Human Factor in Mining Machines Maintenance Operations. Paper presented at the 2016 Second International Symposium on Stochastic Models in Reliability Engineering, Life Science and Operations Management (SMRLO).
Paques, J.-J., Bourbonnière, R., Daigle, R., Duchesne, D., Trudel, C., Villeneuve, J., . . . Schreiber, L. (2004). Sécurité des machines : Phénomènes dangereux, situations dangereuses, événements dangereux, dommages. In C. d. l. s. e. d. l. s. d. t. d. Québec (Ed.).
Parker, S. K. (2003). Longitudinal effects of lean production on employee outcomes and the mediating role of work characteristics. Journal of applied psychology, 88(4), 620. Patton, M. Q. (2005). Qualitative research : Wiley Online Library.
Québec, G. d. (1979). Loi sur la santé et la sécurité du travail. LRQ chap. S—2.1, art, 40-48. Québec, G. d. (1983). Règlement sur les comités de santé et de sécurité du travail. Gazette
officielle du Québec, Partie.
Québec, G. d. (1985). Loi sur les accidents du travail et les maladies professionnelles (LATMP). Québec, ed. Vol LRQ, c. A-3.001. Québec: QC: Éditeur officiel du Québec.
Québec, G. d. (2001). Règlement sur la santé et la sécurité du travail. Gazette officielle du Québec, Partie, 2, 5020-5133.
Reason, J. (1997). Managing the risks of organizational accidents. Hampshire (England): Ashgate Publishing.
Reason, J., & Hobbs, A. (2003). Managing maintenance error: a practical guide : JSTOR. Sakouhi, A. (2014). Pour une meilleure intégration de la santé et la sécurité du travail au
lean manufacturing. École de technologie supérieure.
Sakouhi, A., & Nadeau, S. (2016). Integration of occupational health and safety into lean manufacturing: Quebec aeronautics case study. American Journal of Industrial and Business Management, 6(11), 1019.
Särdnal, C., Swensson, B., & Wretman, J. (1992). Model assisted survey sampling.
Saurin, T. A., & Ferreira, C. F. (2009). The impacts of lean production on working conditions: A case study of a harvester assembly line in Brazil. International Journal of Industrial Ergonomics, 39(2), 403-412.
Shah, R., & Ward, P. T. (2007). Defining and developing measures of lean production. Journal of Operations Management, 25(4), 785-805.
Shimbun, N. K. (1989). Poka-yoke: Improving product quality by preventing defects : CRC Press.
Smith, R., & Hawkins, B. (2004). Lean maintenance: reduce costs, improve quality, and increase market share : Butterworth-Heinemann.
Spear, S., & Bowen, H. K. (1999). Decoding the DNA of the Toyota production system. Harvard business review, 77, 96-108.
Stevenson, W. J., Benedetti, C., & Youssef, Y. A. (2012). La gestion des opérations: produits et services : Chenelière McGraw-Hill.
Summers, A. E. (1998). Techniques for assigning a target safety integrity level. ISA transactions, 37(2), 95-104.
Suryani, A. (2013). Comparing case study and ethnography as qualitative research approaches. Jurnal Ilmu Komunikasi, 5(1).
Tapping, D., Luyster, T., & Shulzer, T. (2003). Value Stream Management: Eight Steps to Planning, Mapping and Sustaining Lean Improvements. Journal for Healthcare Quality, 25(6), 47.
Westerkamp, T. A. (2013). Maintenance Manager's Standard Manual (5th Edition) : BNI Building News.
Williams, H. (1958). Reliability evaluation of the human component in man-machine systems. Electrical Manufacturing, 61(4).
Williamson, R. (2000). TPM: An often misunderstood equipment improvement strategy. Maintenance Technology Magazine online, 13(4).
Womack, J. P., & Jones, D. T. (1996). Beyond Toyota: how to root out waste and pursue perfection. Harvard business review, 74(5), 140-&.
Womack, J. P., Jones, D. T., & Roos, D. (1990). Machine that changed the world : Simon and Schuster.
Womack, S. K., Armstrong, T. J., & Liker, J. K. (2009). Lean job design and musculoskeletal disorder risk: A two plant comparison. Human Factors and Ergonomics in Manufacturing & Service Industries, 19(4), 279-293.
Yang, C. C., & Yang, K. J. (2013). An integrated model of the Toyota production system with total quality management and people factors. Human Factors and Ergonomics in Manufacturing & Service Industries, 23(5), 450-461.
Yin, R. K. (2009). Case study research: Design and methods fourth edition. Los Angeles and London: SAGE.
Yun, C., Chung, T., Yu, C., Chung, C., Ming, Z., & Xin, S. (2004). Application of reliability- centered stochastic approach and FMECA to conditional maintenance of electric power plants in China. Paper presented at the Electric Utility Deregulation, Restructuring and Power Technologies, 2004.(DRPT 2004). Proceedings of the 2004 IEEE International Conference on.