§
NDM54LS12/DM74LS12 Triple 3-lnput NAND Gates
~ with Open-Collector Outputs
:::::IE
c General Description
This device contains three independent gates each of which performs the logic NAND function. The open-collector out-puts require external pull-up resistors for proper logical op-eration.
Connection Diagram
Dual-In-Llne Package
vee CI VI CJ BJ AJ VJ
14 13 12 11 10
AI BI A2 B2 C2 V2 GND
TL/F/6351-1
Order Number DM54LS12J, DM74LS12M or DM74LS12N See NS Package Number J14A, M14A or N14A
Pull-Up Resistor Equations
R Vee (Min) - VOH MAX = Nl (lOH) + N2 (IIH) R Vee (Max) - VOL
MIN = IOL - Ns (lIU
Where: Nl (lOH) = total maximum output high current for all outputs tied to pull-up resistor
N2 (IIH) = total maximum input high current for all inputs tied to pull-up resistor
N3 (lIU = total maximum input low current for all inputs tied to pull-up resistor
Function Table
y = AB Inputs
A B C
X X L
X L X
L X X
H H H
H = High Logic Level L = Low Logic Level
Output Y H H H L
X = Either Low or High Logic Level
Absolute Maximum Ratings
(Note)Specifications for Military/Aerospace products are not Note: The "Absolute Maximum Ratings" are those values contained In this datasheet. Refer to the associated beyond which the safety of the device cannot be guaran-reliability electrical test specifications document. teed The device should not be operated at these limits. The Supply Voltage 7V parametric values defined in the "Electrical Characteristics"
Input Voltage 7V table are not guaranteed at the absolute maximum ratings.
The "Recommended Operating Conditions" table will define
Output Voltage 7V the conditions for actual device operation.
Operating Free Air Temperature Range
DM54LS - 55·C to + 125·C
DM74LS O·Cto +70·C
Storage Temperature Range - 65·C to + 150·C
Recommended Operating Conditions
Symbol Parameter DM54LS12 DM74LS12
Units
Min Nom Max Min Nom Max
Vcc Supply Voltage 4.5 5 5.5 4.75 5 5.25 V
VIH High Level Input Voltage 2 2 V
VIL Low Level Input Voltage 0.7 0.8 V
VOH High Level Output Voltage 5.5 5.5 V
IOL Low Level Output Current 4 8 mA
TA Free Air Operating Temperature -55 125 0 70
·c
Electrical Characteristics
over recommended operating free air temperature range (unless otherwise noted)Symbol Parameter Conditions Min Typ
Max Units
(Note 1)
VI Input Clamp Voltage Vcc
=
Min, II=
-18 mA -1.5 VICEX High Level Output Vcc
=
Min, Vo=
5.5100 IJ-A
Current VIL
=
MaxVOL Low Level Output Vcc
=
Min, IOL=
Max DM54 0.25 0.4Voltage VIH
=
Min DM74 0.35 0.5 VIOL
=
4 mA, Vcc=
Min DM74 0.25 0.4II Input Current @ Max Vcc
=
Max, VI=
7V0.1 mA
Input Voltage
IIH High Level Input Current Vcc
=
Max, VI=
2.7V 20 IJ-AIlL Low Level Input Current Vcc
=
Max, VI=
0.4V -0.36 mAICCH Supply Current with Vcc
=
Max0.7 1.4 mA
Outputs High
ICCL Supply Current with Vcc
=
Max1.8 3.3 mA
Outputs Low
Switching Characteristics
at Vcc=
5V and TA=
25°C (See Section 1 for Test Waveforms and Output Load) RL=
2kOSymbol Parameter CL
=
15pF CL=
50pF UnitsMin Max Min Max
tpLH Propagation Delay Time
6 20 20 45 ns
Low to High Level Output tpHL Propagation Delay Time
3 15 4 20 ns
High to Low Level Output Note 1: All typicals are at Vee = 5V, TA = 2S'C.
2-23
c 3:
.Do U1
r-
C/)...
N ...
C
==
...
.Do
r-C/)
...
N
~
,...
~ ~NatiOnal
~
Semiconductor
~
Corporation
...
c
~
C;; DM54LS14/DM74LS14 Hex Inverters
..J
~ with Schmitt Trigger Inputs
~
c
General Description
This device contains six independent gates each of which performs the logic INVERT function. Each input has hyster-esis which increases the noise immunity and transforms a slowly changing input signal to a fast changing, jitter free output.
Connection Diagram
Dual-In-Line Package
A6 V6 AS VS
Al Vl A2 V2 AJ
A4 V4
VJ Order Number DM54LS14J, DM74LS14M or DM74LS14N
See NS Package Number J14A, M14A or N14A
Function Table
Y=A
Input A L H H = High Logic Level L = Low Logic Level
Output Y H L
TLIF/6353-1
Absolute Maximum Ratings
(Note)Specifications for Military/Aerospace products are not Note: The "Absolute Maximum Ratings" are those values contained In this datasheet. Refer to the associated beyond which the safety of the device cannot be guaran-reliability electrical test specifications document. teed. The device should not be operated at these limits. The Supply Voltage 7V parametric values defined in the "Electrical Characteristics"
Input Voltage 7V table are not guaranteed at the absolute maximum ratings.
The "Recommended Operating Conditions" table wHl define Operating Free Air Temperature Range the conditions for actual device operation.
DM54LS - 55°C to + 125°C
DM74LS O°Cto +70°C
Storage Temperature Range - 65°C to + 150°C
Recommended Operating Conditions
Symbol Parameter DM54LS14 DM74LS14
Units
Min Nom Max Min Nom Max
Vee Supply Voltage 4.5 5 5.5 4.75 5 5.25 V
VT+ Positive-Going Input
1.4 1.6 1.9 1.4 1.6 1.9 V
Threshold Voltage (Note 1) VT- Negative-Going Input
0.5 0.8 1 0.5 0.8 1 V
Threshold Voltage (Note 1)
HYS Input Hysteresis (Note 1) 0.4 0.8 0.4 0.8 V
10H High Level Output Current -0.4 -0.4 rnA
10l Low Level Output Current 4 8 rnA
TA Free Air Operating Temperature -55 125 0 70 °C
Electrical Characteristics
over recommended operating free air temperature range (unless otherwise noted)Symbol Parameter Conditions Min Typ
Max Units
(Note 2)
VI Input Clamp Voltage Vee = Min, II = -18 rnA -1.5 V
VOH High Level Output Vee = Min, 10H = Max DM54 2.5 3.4
Voltage Vil = Max DM74 2.7 3.4 V
VOL Low Level Output Vee = Min, 10l = Max DM54 0.25 0.4
Voltage VIH = Min DM74 0.35 0.5 V
Vee = Min, 10l = 4 rnA DM74 0.25 0.4
IT+ Input Current at Vee = 5V, VI = VT+
-0.14 rnA
Positive-Going Threshold
IT- Input Current at Vee = 5V, VI =
VT--0.18 rnA
Negative-Going Threshold
II Input Current @ Max Vee = Max, VI = 7V
0.1 rnA
Input Voltage
IIH High Level Input Current Vee = Max, VI = 2.7V 20 ILA
III Low Level Input Current Vee = Max, VI = O.4V -0.4 rnA
los Short Circuit Vee = Max DM54 -20 -100
Output Current (Note 3) DM74 -20 -100 rnA
leeH Supply Current with Vee = Max
8.6 16 rnA
Outputs High
leel Supply Current with Vee = Max
12 21 rnA
Outputs Low Note 1: vce = 5V.
Note 2: All typicals are at Vee = 5V, T A = 25°C.
Note 3: Not more than one output should be shorted at a time, and the duration should not exceed one second.
Switching Characteristics
at Vee = 5V and TA = 25°C (See Section 1 for Test Waveforms and Output Load) RL = 2 kflSymbol Parameter CL = 15pF CL = 50pF Units
Min Max Min Max
tpLH Propagation Delay Time
5 22 8 25 ns
Low to High Level Output tpHL Propagation Delay Time
5 22 10 33 ns
High to Low Level Output
I
~ Semiconductor
NatiOnalCorporation
DM54LS20/DM74LS20 Dual 4-lnput NAND Gates
General Description
This device contains two independent gates each of which performs the logic NAND function.
Connection Diagram
Dual-ln-L1ne Package
ViC
114
AI 02
13
BI C2
12 NIC
"
CI 82
10
01
A2 V2
1 -
)0
-VI Order Number DM54LS20J, DM74LS20M or DM74LS20N
See NS Package Number J14A, M14A or N14A
Function Table
y = ABCD
Inputs Output
A B C D Y
X X X L H
X X L X H
X L X X H
L X X X H
H H H H L
H = High Logic Level L = Low Logic Level
X = Either Low or High Logic Level
TL/F/6355-1
c s:
U1 ~
r- en
N o ...
C
s:
...
~
r-en
N oAbsolute Maximum Ratings
(Note)Specifications for Military/Aerospace products are not Note: The "Absolute Maximum Ratings" are those values contained In this datasheet. Refer to the associated beyond which the safety of the device cannot be guaran-reliability electrical test specifications document. teed The device should not be operated at these limits. The Supply Voltage 7V parametric values defined in the "Electrical Characteristics"
Input Voltage 7V table are not guaranteed at the absolute maximum ratings.
The "Recommended Operating Conditions" table will define Operating Free Air Temperature Range the conditions for actual device operation.
DM54LS - 55°C to
+
125°CDM74LS O°Cto
+
70°CStorage Temperature Range - 65°C to
+
150°CRecommended Operating Conditions
Symbol Parameter DM54LS20 DM74LS20
Units
Min Nom Max Min Nom Max
Vcc Supply Voltage 4.5 5 5.5 4.75 5 5.25 V
VIH High Level Input Voltage 2 2 V
Vil Low Level Input Voltage 0.7 0.8 V
10H High Level Output Current -0.4 -0.4 mA
10L Low Level Output Current 4 8 mA
TA Free Air Operating Temperature -55 125 0 70 °C
Electrical Characteristics
over recommended operating free air temperature range (unless otherwise noted)Symbol Parameter Conditions Min Typ
Max Units
(Note 1)
VI Input Clamp Voltage Vce = Min, II = -18 mA -1.5 V
VOH High Level Output Vce = Min, 10H = Max, DM54 2.5 3.4
Voltage VIL = Max DM74 2.7 3.4 V
VOL Low Level Output Vee = Min, 10L = Max, DM54 0.25 0.4
Voltage VIH = Min DM74 0.35 0.5 V
10l = 4 mA, Vee = Min DM74 0.25 0.4
II Input Current @ Max Vce = Max, VI = 7V 0.1 mA
Input Voltage
IIH High Level Input Current Vee = Max, VI = 2.7V 20 p.A
III Low Level Input Current Vee = Max, VI = O.4V -0.36 mA
los Short Circuit Vee = Max DM54 -20 -100 mA
Output Current (Note 2) DM74 -20 -100
lecH Supply Current with Vee = Max 0.4 0.8 mA
Outputs High
lecl Supply Current with Vee = Max 1.2 2.2 mA
Outputs Low
Switching Characteristics
at Vee = 5V and TA = 25°C (See Section 1 for Test Waveforms and Output Load) RL = 2 knSymbol Parameter CL = 15 pF CL = 50pF Units
Min Max Min Max
tpLH Propagation Delay Time
3 10 4 15 ns
Low to High Level Output tpHL Propagation Delay Time
3 10 4 15 ns
High to Low Level Output
~ Semiconductor
NatiOnalCorporation
DM54LS21/DM74LS21 Dual 4-lnput AND Gates
General Description
This device contains two independent gates each of which performs the logic AND function.
Connection Diagram
Dual-In-Llne Package
ViC 114
AI 02
13
81
1:2 82
12 10
1:1 01
A2 V2
1
-... ~
}
-VI Order Number DM54LS21J, DM74LS21M or DM74LS21N
See NS Package Number J 14A, M 14A or N 14A
Function Table
Y = ABCD
Inputs Output
A B C D Y
X X X L L
X X L X L
X L X X L
L X X X L
H H H H H
H = High Logic Level L = Low Logic Level
X = Either Low or High Logic Level
2·29
TL/F/6356-1
Absolute Maximum Ratings
(Note)Specifications for Military/Aerospace products are not Note: The "Absolute Maximum Ratings" are those values contained In this datasheet. Refer to the associated beyond which the safety of the device cannot be guaran-reliability electrical test specifications document. teed. The device should not be operated at these limits. The Supply Voltage 7V parametric values defined in the "E/ectrical Characteristics"
Input Voltage 7V table are not guaranteed at the absolute maximum ratings.
The "Recommended Operating Conditions" table will define Operating Free Air Temperature Range the conditions for actual device operation.
DM54LS - 55·C to + 125·C
DM74LS O·Cto +70·C
Storage Temperature Range - 65·C to + 150·C
Recommended Operating Conditions
Symbol Parameter DM54LS21 DM74LS21
Units
Min Nom Max Min Nom Max
Vce Supply Voltage 4.5 5 5.5 4.75 5 5.25 V
VIH High Level Input Voltage 2 2 V
VIL Low Level Input Voltage 0.7 0.8 V
10H High Level Output Current -0.4 -0.4 mA
10L Low Level Output Current 4 8 mA
TA Free Air Operating Temperature -55 125 0 70 ·C
Electrical Characteristics
over recommended operating free air temperature range (unless otherwise noted)Symbol Parameter Conditions Min Typ
Max Units
(Note 1)
VI Input Clamp Voltage Vee
=
Min,ll=
-18 mA -1.5 VVOH High Level Output Vee
=
Min,lOH=
Max, DM54 2.5 3.4 VVoltage VIH
=
Min DM74 2.7 3.4VOL Low Level Output Vec
=
Min,lOL=
Max, DM54 0.25 0.4Voltage VIL
=
Max DM74 0.35 0.5 V10L
=
4 rnA, Vee=
Min DM74 0.25 0.4II Input Current @ Max Vee
=
Max, VI=
7V 0.1 mAInput Voltage
IIH High Level Input Current Vee
=
Max, VI=
2.7V 20 p.AIlL Low Level Input Current Vec
=
Max, VI=
O.4V -0.36 mAlos Short Circuit Vee
=
Max DM54 -20 -100 mAOutput Current (Note 2) DM74 -20 -100
leeH Supply Current with Vec
=
Max 1.2 2.4 mAOutputs High
IceL Supply Current with Vee
=
Max 2.2 4.4 mAOutputs Low
Switching Characteristics
at Vee=
SV and TA=
2S·C (See Section 1 for Test Waveforms and Output Load) RL=
2kOSymbol Parameter CL
=
1SpF CL=
SOpF UnitsMin Max Min Max
tpLH Propagation Delay Time
4 13 6 18 ns
Low to High Level Output tpHL Propagation Delay Time
3 11 5 18 ns
~ Semiconductor
NatiOnalCorporation
DM54LS26/DM74LS26 Quad 2-lnput NAND Gates with High Voltage Open-Collector Outputs
General Description
This device contains four independent gates each of which performs the logic NAND function. The open-collector out-puts require external pull-up resistors for proper logical op-eration.
These gates feature high-voltage output ratings (up to 15V) for interfacing with 12V systems. Although the outputs are rated for 15V, the device supply is still rated for 5V.
Connection Diagram
Pull-Up Resistor Equations
R Vo (Min) - VOH MAX = N1 (IOH)
+
N2 (IIH) R Vo (Max) - VOLMIN = IOL - N3 (lIU
Where: N 1 (IOH) = total maximum output high current for all outputs tied to pull-up resistor
N2 (IIH) = total maximum input high current for all inputs tied to pull-up resistor
N3 (IIU = total maximum input low current for all inputs tied to pull-up resistor
Dual·ln·Llne Package
Function Table
vee 84 A4 V4 B3 A3 V3
14 13 12 11 10
AI 81 VI A2 B2 V2 GND
Order Number DM54LS26J, DM74LS26M or DM74LS26N See NS Package Number J14A, M14A or N14A
y = AB Inputs
A B
L L
L H
H L
H H
H = High Logic Level L = Low Logic Level
2-31
Output Y H H H L
TL/F/6356-1
Absolute Maximum Ratings
(Note)Specifications for Military/Aerospace products are not Note: The "Absolute Maximum Ratings" are those values contained In this datasheet. Refer to the associated beyond which the safety of the device cannot be guaran-reliability electrical test specifications document. teed The device should not be operated at these limits. The Supply Voltage 7V parametric values defined in the "Electrical Characteristics"
Input Voltage 7V table are not guaranteed at the absolute maximum ratings.
The "Recommended Operating Conditions" table will define
Output Voltage 15V the conditions for actual device operation.
Operating Free Air Temperature Range
DM54LS - 55°C to + 125°C
DM74LS O°C to +70°C
Storage Temperature Range - 65°C to + 150°C
Recommended Operating Conditions
Symbol Parameter DM54LS26 DM74LS26
Units
Min Nom Max Min Nom Max
Vcc Supply Voltage 4.5 5 5.5 4.75 5 5.25 V
VIH High Level Input Voltage 2 2 V
Vil Low Level Input Voltage 0.7 0.8 V
VOH High Level Output Voltage 15 15 V
IOl Low Level Output Current 4 8 rnA
TA Free Air Operating Temperature -55 125 0 70 °C
Electrical Characteristics
over recommended operating free air temperature range (unless otherwise noted)Symbol Parameter Conditions Min Typ
Max Units
(Note 1)
VI Input Clamp Voltage Vec = Min, II = -18 rnA -1.5 V
ICEX High Level Output Vcc = Min Vo = 15V 1000
Current Vil = Max Vo = 12V 50 p,A
VOL Low Level Output Vcc = Min, IOl = Max OM 54 0.25 0.4
Voltage VIH = Min DM74 0.35 0.5 V
IOl = 4 rnA, Vee = Min DM74 0.25 0.4
II Input Current @ Max Vee = Max, VI = 7V
0.1 rnA
Input Voltage
IIH High Level Input Current Vec = Max, VI = 2.7V 20 p,A
III Low Level Input Current Vee = Max, VI = O.4V -0.36 rnA
ICCH Supply Current with Vee = Max
0.8 1.6 rnA
Outputs High
lecl Supply Current with Vce = Max
2.4 4.4 rnA
Outputs Low
Switching Characteristics
at Vee = 5V and T A = 25°C (See Section 1 for Test Waveforms and Output Load) RL = 2knSymbol Parameter Conditions CL = 15 pF Units
Min Max
tpLH Propagation Delay Time
32 ns
Low to High Level Output tpHL Propagation Delay Time
28 ns
High to Low Level Output
~ Semiconductor
NatiOnalCorporation
DM54LS27/DM74LS27 Triple 3-lnput NOR Gates
General Description
This device contains three independent gates each of which performs the logic NOR function.
Connection Diagram
Dual-In-Llne Package
Vee Cl VI C3 83
14 13 12 11
Al 81 A2 62 C2
AJ V3
V2 GND
Order Number DM54LS27J, DM74LS27M or DM74LS27N See NS Package Number J14A, M14A or N14A
Function Table
Y=A+B Inputs
A B
L L
L H
H L
H H
H = High Logic Level L = Low Logic Level
Output Y H L L L
TL/F/6359-1
Absolute Maximum Ratings
(Note)Specifications for Military/Aerospace products are not Note: The ''Absolute Maximum Ratings" are those values contained In this datasheet. Refer to the associated beyond which the safety of the device cannot be guaran-reliability electrical test specifications document. teed The device should not be operated at these limits. The Supply Voltage 7V parametric values defined in the "Electrical Characteristics"
Input Voltage 7V table are not guaranteed at the absolute maximum ratings.
The "Recommended Operating Conditions" table wt1l define Operating Free Air Temperature Range the conditions for actual device operation.
DM54LS - 55°C to + 125°C
DM74LS O°Cto +70°C
Storage Temperature Range - 65°C to + 150°C
Recommended Operating Conditions
Symbol Parameter DM54LS27 DM74LS27
Units
Min Nom Max Min Nom Max
Vcc Supply Voltage 4.5 5 5.5 4.75 5 5.25 V
VIH High Level Input Voltage 2 2 V
Vil Low Level Input Voltage 0.7 0.8 V
IOH High Level Output Current -0.4 -0.4 mA
IOl Low Level Output Current 4 8 mA
TA Free Air Operating Temperature -55 125 0 70 °C
Electrical Characteristics
over recommended operating free air temperature range (unless otherwise noted)Symbol Parameter Conditions Min Typ
Max Units
(Note 1)
VI Input Clamp Voltage Vee
=
Min, II=
-18 mA -1.5 VVOH High Level Output Vee
=
Min, IOH=
Max, DM54 2.5 3.4Voltage Vil
=
Max DM74 2.7 3.4 VVOL Low Level Output Vce
=
Min, IOl=
Max, DM54 0.25 0.4Voltage VIH
=
Min DM74 0.35 0.5 VIOl
=
4 mA, Vee=
Min DM74 0.25 0.4II Input Current @ Max Vee
=
Max, VI=
7V 0.1 mAInput Voltage
IIH High Level Input Current Vee
=
Max, VI=
2.7V 20 ,.,.AIII Low Level Input Current Vee
=
Max, VI=
0.4V -0.36 mAlos Short Circuit Vee
=
Max DM54 -20 -100 mAOutput Current (Note 2) DM74 -20 -100
leCH Supply Current with Vee
=
Max2 4 mA
Outputs High
leel Supply Current with Vee
=
Max 3.4 6.8 mAOutputs Low
Switching Characteristics
at Vee=
5V and T A=
25°C (See Section 1 for Test Waveforms and Output Load) RL=
2knSymbol Parameter CL
=
15pF CL=
50 pF UnitsMin Max Min Max
tpLH Propagation Delay Time
3 13 5 18 ns
Low to High Level Output tpHl Propagation Delay Time
3 10 4 15 ns
~ Semiconductor
NatiOnalCorporation
DM54LS30/DM74LS30 a-Input NAND Gate
General Description
This device contains a single gate which performs the logic NAND function.
Connection Diagram
A
Dual-ln-L1ne Package
NC
12 II
/10
GND
P
Order Number DM54LS30J, DM74LS30M or DM74LS30N See NS Package Number J14A, M14A or N14A
Function Table
v
= ABCDEFGH InputsA thru H All Inputs H One or More Input L
H = High Logic Level L = Low Logic Level
Output
v
L H
TL/F/6360-1
c :s:
U1 0l:Io
r en
eN
o
...C
:s:
""
0l:Io
r en
eN
o
o
C") tJ) ...J~
...
:e c
...
o
C") tJ) ...J~
:e
II)c
Absolute Maximum Ratings
(Note)Specifications for Military/Aerospace products are not Note: The "Absolute Maximum Ratings" are those values contained In this datasheet. Refer to the associated beyond which the safety of the device cannot be guaran-reliability electrical test specifications document. teed The device should not be operated at these limits. The Supply Voltage 7V parametric values defined in the "Electrical Characteristics"
Input Voltage 7V table are not guaranteed at the absolute maximum ratings.
The "Recommended Operating Conditions" table wHl define Operating Free Air Temperature Range the conditions for actual device operation.
DM54LS - 55°C to
+
125°CDM74LS O°C to
+
70°CStorage Temperature Range - 65°C to
+
150°CRecommended Operating Conditions
Symbol Parameter DM54LS30 DM74LS30
Units
Min Nom Max Min Nom Max
Vee Supply Voltage 4.5 5 5.5 4.75 5 5.25 V
VIH High Level Input Voltage 2 2 V
Vil Low Level Input Voltage 0.7 0.8 V
10H High Level Output Current -004 -004 mA
10l Low Level Output Current 4 8 mA
TA Free Air Operating Temperature -55 125 0 70 °C
Electrical Characteristics
over recommended operating free air temperature range (unless otherwise noted)Symbol Parameter Conditions Min Typ
Max Units
(Note 1)
VI Input Clamp Voltage Vee = Min, II = -18 mA -1.5 V
VOH High Level Output Vee = Min, IOH = Max DM54 2.5 3.4
Voltage Vil = Max DM74 2.7 304 V
VOL Low Level Output Vee = Min, IOl = Max DM54 0.25 004
Voltage VIH = Min DM74 0.35 0.5 V
IOl = 4 mA, Vee = Min DM74 0.25 004
II Input Current @ Max Vee = Max, VI = 7V
0.1 mA
Input Voltage
IIH High Level Input Current Vee = Max, VI = 2.7V 20 /-LA
IlL Low Level Input Current Vee = Max, VI = OAV -0.4 mA
los Short Circuit Vee = Max DM54 -20 -100
Output Current (Note 2) DM74 -20 -100 mA
leeH Supply Current with Vee = Max
0.35 0.5 mA
Outputs High
leel Supply Current with Vee = Max
0.6 1.1 mA
Outputs Low
Switching Characteristics
at Vee = 5V and T A = 25°C (See Section 1 for Test Waveforms and Output Load) RL = 2 k!1Symbol Parameter CL = 15 pF CL = 50 pF Units
Min Max Min Max
tpLH Propagation Delay Time
4 12 5 18 ns
Low to High Level Output tpHl Propagation Delay Time
4 15 5 20 ns