Bouleversement organisationnel

O fotoiniciador PPD mostrou grande potencial para a iniciação da reação de polimerização de compósitos dentais experimentais, principalmente quando fotoativado por um LED de 3° geração como o UltraLume LED 5. Em geral, o PPD apresentou propriedades mecânicas e valores de conversão monomérica semelhantes à CQ, porém com uma velocidade ou cinética de reação mais lenta e maiores valores de resistência de união dente/restauração, mesmo produzindo polímeros com maior densidade de ligações cruzadas, desde que fotoativado com LEDs.

A utilização de diferentes fontes de luz pode interferir nos resultados. Dessa forma, quanto maior a correlação do espectro de emissão da fonte de luz e o espectro de absorção do fotoiniciador, melhores resultados podem ser obtidos.

REFERÊNCIAS*

Allen NS. Photoinitiators for UV and visible curing of coatings: Mechanisms and properties. Journal of Photochemistry and Photobiology a-Chemistry. 1996 Oct 25;100(1-3):101-7.

Alonso RCB, Cunha LG, Correr GM, Brandt WC, Correr-Sobrinho L e Sinhoreti MAC. Relationship between bond strength and marginal and internal adaptation of composite restorations photocured by different methods. Acta Odontol Scand 2006; 64(5): 306-313.

Alvim HH, Alecio AC, Vasconcellos WA, Furlan M, de Oliveira JE, Saad JRC. Analysis of camphorquinone in composite resins as a function of shade. Dent Mater. 2007 Oct;23(10):1245-9.

Arikawa H, Takahashi H, Kanie T e Ban S. Effect of various visible light photoinitiators on the polymerization and color of light-activated resins. Dental Materials Journal 2009; 28(4): 454–460.

Asmussen E, Peutzfeldt A. Influence of pulse-delay curing on softening of polymer structures. J Dent Res 2001;80:1570–3.

Asmussen E e Peutzfeldt A. Influence of composition on rate of polymerization contraction of light-curing resin composites. Acta Odontol Scand 2002; 60(3): 146- 50.

____________________

* De acordo com a norma da UNICAMP/FOP, baseada na norma do International Committee of Medical Journal Editors – Grupo de Vancouver. Abreviatura dos periódicos em conformidade com o

Bagis YH, Rueggeberg FA. Mass loss in urethane/TEGDMA- and Bis- GMA/TEGDMA-based resin composites during post-cure heating. Dent Mater. 1997 Nov;13(6):377-80.

Bennett AW e Watts DC. Performance of two blue light-emitting-diode dental light curing units with distance and irradiation-time. Dent Mater 2004; 20(1): 72-9.

Blankenau RJ, Kelsey WP, Cavel WT e Blankenau P. Wavelength and intensity of seven systems for visible light-curing composite resins: a comparison study. J Am Dent Assoc 1983; 106(4): 471-4.

Brandt WC, de Moraes RR, Correr-Sobrinho L, Sinhoreti MA, Consani S. Effect of different photo-activation methods on push out force, hardness and cross-link density of resin composite restorations. Dent Mater. 2008 Jun;24(6):846-50.

Chen YC, Ferracane JL, Prahl SA. A pilot study of a simple photon migration model for predicting depth of cure in dental composite. Dent Mater 2005;21:1075– 6.

Cook WD. Colour stability and visual perception of dimethacrylate based dental composite resins. Biomaterials 1985; 6: 257-264.

Cook WD. Curing efficiency and ocular hazards of dental photopolymerization sources. Biomaterials 1986; 7(6): 449-54.

Cook WD. Photopolymerization kinetics of dimethacrylates using the camphorquinone/amine initiator system. Polymer 1992; 33(3): 600-609.

Cunha LG, Alonso RC, Correr GM, Brandt WC, Correr-Sobrinho L, Sinhoreti MA. Effect of different photoactivation methods on the bond strength of composite resin restorations by push-out test. Quintessence Int. 2008 Mar;39(3):243-9.

Emami N, Soderholm KJ. Dynamic mechanical thermal analysis of two light-cured dental composites. Dent Mater. 2005 Oct;21(10):977-83.

Emami N e Soderholm KJ. Influence of light-curing procedures and photo- initiator/co-initiator composition on the degree of conversion of light-curing resins. J Mater Sci Mater Med 2005; 16(1): 47-52.

Feng L, Suh BI. A mechanism on why slower polymerization of a dental composite produces lower contraction stress. J Biomed Mater Res Part B: Appl Biomater 2006;78B:63–9

Ferracane JL. Hygroscopic and hydrolytic effects in dental polymer networks. Dent Mater. 2006 Mar;22(3):211-22.

Fonseca RG, Santos JG, Adabo GL. Influence of activation modes on diametral tensile strength of dual-curing resin cements. Braz Oral Res. 2005 Oct- Dec;19(4):267-71.

Ilie N, Hickel R. Can CQ be completely replaced by alternative initiators in dental adhesives? Dent Mater J. 2008 Mar;27(2):221-8.

Kalliyana Krishnan V e Yamuna V. Effect of initiator concentration, exposure time and particle size of the filler upon the mechanical properties of a light-curing radiopaque dental composite. J Oral Rehabil 1998; 25(10): 747-51.

Kurachi C, Tuboy AM, Magalhaes DV e Bagnato VS. Hardness evaluation of a dental composite polymerized with experimental LED-based devices. Dent Mater 2001; 17(4): 309-15.

Leonard DL, Charlton DG, Roberts HW e Cohen ME. Polymerization efficiency of LED curing lights. J Esthet Restor Dent 2002; 14(5): 286-95.

Micali B, Basting RT. Effectiveness of composite resin polymerization using light- emitting diodes (LEDs) or halogen-based light-curing units. Braz Oral Res. 2004 Jul-Sep;18(3):266-70.

Moraes RR, Brandt WC, Naves LZ, Correr-Sobrinho L, Piva E. Light- and time- dependent polymerization of dual-cured resin luting agent beneath ceramic. Acta Odontol Scand. 2008 Oct;66(5):257-61.

Musanje L, Ferracane JL, Sakaguchi RL. Determination of the optimal photoinitiator concentration in dental composites based on essential material properties. Dent Mater. 2009 Aug;25(8):994-1000.

Neumann MG, Miranda WG, JR., Schmitt CC, Rueggeberg FA e Correa IC. Molar extinction coefficients and the photon absorption efficiency of dental photoinitiators and light curing units. J Dent 2005; 33(6): 525-32.

Neumann MG, Schmitt CC, Ferreira GC e Correa IC. The initiating radical yields and the efficiency of polymerization for various dental photoinitiators excited by different light curing units. Dent Mater 2006; 22(6): 576-84.

Nomoto R. Effect of light wavelength on polymerization of light-cured resins. Dent Mater J. 1997 Jun;16(1):60-73.

Ogunyinka A, Palin WM, Shortall AC, Marquis PM. Photoinitiation chemistry affects light transmission and degree of conversion of curing experimental dental resin composites. Dent Mater. 2007 Jul;23(7):807-13.

Park YJ, Chae KH e Rawls HR. Development of a new photoinitiation system for dental light-cure composite resins. Dent Mater 1999; 15(2): 120-7.

Park J, Ye Q, Topp EM, Misra A, Kieweg SL, Spencer P. Effect of photoinitiator system and water content on dynamic mechanical properties of a light-cured bisGMA/HEMA dental resin. J Biomed Mater Res A. 2010 Jun;15;93(4):1245-51.

Price RB, Felix CA, Andreou P. Evaluation of a dual peak third generation LED curing light. Compend Contin Educ Dent. 2005 May;26(5):331-2, 4, 6-8 passim; quiz 48.

Rueggeberg F, Tamareselvy K. Resin cure determination by polymerization shrinkage. Dent Mater. 1995 Jul;11(4):265-8.

Rueggeberg FA, Ergle JW e Lockwood PE. Effect of photoinitiator level on properties of a light-cured and post-cure heated model resin system. Dent Mater 1997; 13(6): 360-4.

Rueggeberg F. Contemporary issues in photocuring. Compend Contin Educ Dent Suppl 1999; (25): S4-15; quiz S73.

Ruyter IE e Oysaed H. Conversion in different depths of ultraviolet and visible light activated composite materials. Acta Odontol Scand 1982; 40(3): 179-92.

Schneider LF, Consani S, Correr-Sobrinho L, Correr AB e Sinhoreti MA. Halogen and LED light curing of composite: temperature increase and Knoop hardness. Clin Oral Investig 2006: 1-6.

Schneider LF, Pfeifer CS, Consani S, Prahl SA, Ferracane JL. Influence of photoinitiator type on the rate of polymerization, degree of conversion, hardness and yellowing of dental resin composites. Dent Mater. 2008 Sep;24(9):1169-77.

Schneider LF, Cavalcante LM, Consani S, Ferracane JL. Effect of co-initiator ratio on the polymer properties of experimental resin composites formulated with camphorquinone and phenyl-propanedione. Dent Mater. 2009 Mar;25(3):369-75.

Schneider LF, Consani S, Sakaguchi RL, Ferracane JL. Alternative photoinitiator system reduces the rate of stress development without compromising the final properties of the dental composite. Dent Mater. 2009 May;25(5):566-72.

Schroeder W, Arenas G, Vallo C. Monomer conversion in a light-cured dental resin containing 1-phenyl-1,2- propanedione photosensitizer. Polym Int 2007. 56:1099– 1105

Segreto D, Brandt WC, Correr-Sobrinho L, Sinhoreti MA, Consani S. Influence of irradiance on the push-out bond strength of composite restorations photoactivated by LED. J Contemp Dent Pract. 2008;9(2):89-96.

Shin DH, Rawls HR. Degree of conversion and color stability of the light curing resin with new photoinitiator systems. Dent Mater. 2009 Aug;25(8):1030-8.

Soh MS, Yap AU. Influence of curing modes on crosslink density in polymer structures. J Dent. 2004 May;32(4):321-6.

Stahl F, Ashworth SH, Jandt KD e Mills RW. Light-emitting diode (LED) polymerisation of dental composites: flexural properties and polymerisation potential. Biomaterials 2000; 21(13): 1379-85.

Stansbury JW. Curing dental resins and composites by photopolymerization. J Esthet Dent 2000; 12(6): 300-8.

Sun GJ e Chae KH. Properties of 2,3-butanedione and 1-phenyl-1,2-propanedione as new photosensitizers for visible light cured dental resin composites. Polymer

Taira M, Urabe H, Hirose T, Wakasa K e Yamaki M. Analysis of photo-initiators in visible-light-cured dental composite resins. J Dent Res 1988; 67(1): 24-8.

Teshima W, Nomura Y, Tanaka N, Urabe H, Okazaki M e Nahara Y. ESR study of camphorquinone/amine photoinitiator systems using blue light-emitting diodes. Biomaterials 2003; 24(12): 2097-103.

Uhl A, Mills RW e Jandt KD. Photoinitiator dependent composite depth of cure and Knoop hardness with halogen and LED light curing units. Biomaterials 2003; 24(10): 1787-95.

Uhl A, Michaelis C, Mills RW e Jandt KD. The influence of storage and indenter load on the Knoop hardness of dental composites polymerized with LED and halogen technologies. Dent Mater 2004; 20(1): 21-8.

Uhl A, Mills RW, Rzanny AE e Jandt KD. Time dependence of composite shrinkage using halogen and LED light curing. Dent Mater 2005; 21(3): 278-86.

Venhoven BA, de Gee AJ, Davidson CL. Polymerization contraction and conversion of light-curing BisGMA-based methacrylate resins. Biomaterials. 1993 Sep;14(11):871-5.

Yap AU, Soh MS, Han TT, Siow KS. Influence of curing lights and modes on cross- link density of dental composites. Oper Dent. 2004 Jul-Aug;29(4):410-5.

Yoshida K, Greener EH. Effect of photoinitiator on degree of conversion of unfilled light-cured resin. J Dent 1994 Oct;22(5):296-9.