Modeling of Eddy Current Characterization of Composite Materials With Taking Into Account of Capacitive Effect

In this work, a numerical modeling framework is proposed to evaluate the effective electric conductivity in poly- mer composites reinforced with graphene sheets, taking into account

To study the electroacoustical behavior of the fabricated prototype, electrical and mechanical measurements are realized on both single element slender bar (elementary transducer)

We created simulated a set of random shape having decreasing values of modal coefficients λ i (an hyperbolic law was used) and covariances such as a batch production should

The stereo kernel [6] which compares the minimal stereo subgraphs of two ordered graphs has one drawback : graph information are reduced to a bag of subgraphs without taking

Experimental results show that fine nanocrystalline alloy powders prepared by mechanical milling are very promising for microwave applications and it is suggested that Eddy

For this we are used a planetary ball mill, we are milled the Fe-Co alloy for different milling times until to obtain nanostructure, the lamellar structure with some small

7 Influence of different net emission coefficient data in a 250 A arc with 1% vaporization rate relative to the wire feed rate of 10 m/min (top: temperature and flow velocity

Thus, we obtained the twodimensional equilib rium equations for plates and shells with taking into account the transverse shear and the presence of sur face stresses. We presented