• Aucun résultat trouvé

Analysis and evaluation of the impact of climaticconditions on thephotovoltaic modulesperformance in the desert environment

N/A
N/A
Protected

Academic year: 2021

Partager "Analysis and evaluation of the impact of climaticconditions on thephotovoltaic modulesperformance in the desert environment"

Copied!
1
0
0

Texte intégral

(1)

Energy Conversion and Management

Volume 106, Issue 1, 2015, Pages 1345-1355

Analysis and evaluation of the impact of climatic conditions on thephotovoltaic modules

performance in the desert environment

A Bouraiou, M. Hamouda, A. Chaker, M. Mostefaoui, S. Lachtar, M. Sadok, N.

BOUTASSETA, M. Othmani, I. Attoui

Abstract: The main objective of this study is to investigate the impact of climatic conditions on the performance ofphotovoltaic modules installed in the desert region in south of Algeria. Firstly, the performance ofISOFOTON 100 module under daily weather conditions is evaluated. Next, the effects of partial shadingand accumulation of sand dust for a period of two months on power loss and the current–voltagecharacteristics of photovoltaic modules are examined. Finally, the visual inspection of the degradationof the UDTS 50 modules such as discoloration of encapsulant and delamination show the influence ofhigh temperature and the other climatic factors in the Saharan environment after a long time exposureof more than 10 years observed in the field at the Unit of Research in Renewable energy URERMS Adrar.The performance degradation is also assessed using (I–V and P–V) curves normalized at STC conditioncompared with the nominal STC data given by the manufacturer. The experimental results show thatthe performance parameters such as maximum output current (Imax), maximum output voltage (Vmax),maximum power output (Pmax), open-circuit voltage (Voc), short-circuit current (Isc) and fill factor (FF)of UDTS 50 modules are degraded after these years of exposition.

Keywords : Photovoltaic module, Performance evaluation, degradation, Desert environment

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Documents relatifs

A much simpler output feedback controller is presented in which the converging estimate of the me- chanical input power directly constitutes the reference value for the electrical

TRACKING THE POINT OF MAXIMUM POWER (MPPT) In order to overcome the above mentioned undesired effects on the PV output power, a maximum power point tracker (MPPT)

For a typical core power supply controller, the initial output voltage tolerance plus ripple is much smaller than the DC window.. It therefore may be beneficial for the output

The global picture of galaxy evolution is recovered as in the two previous cases, but it seems that the evolution of the vari- ables looks slightly less regular than for the

This study is based on two measure- ments between room and liquid nitrogen temperatures: the SBS linewidth and threshold power in a passive fiber, and the spectra of absorption and

In this paper for the first time the method of automated synthesis of the analog electronic circuit by mean of evolution is applied to the synthesis of multi-

Post-print version can be archived on an institutional repository without embargo (Elsevier Green Open Access

Post-print version can be archived on an institutional repository without embargo (Elsevier Green Open Access