• Aucun résultat trouvé

Acridinium Ion Ionization at Elevated Temperatures andPressures to 200 °C and 2000 bar

N/A
N/A
Info
Télécharger
Protected

Academic year: 2021

Partager "Acridinium Ion Ionization at Elevated Temperatures andPressures to 200 °C and 2000 bar"

Copied!
15
0
0

Chargement.... (Voir le texte intégral maintenant)

Texte intégral

Figure

Table 1 Previously reported data for the ionization constant of the acridinium ion at ambient temperature
Fig. 2 Spectra of acridine and the acridinium ion at 25 °C corrected for background absorbance: (a) over the whole range of studied wavelengths, [A] = 3.27 × 10 − 6 mol · kg − 1 and [AH + ] = 3.96 × 10 − 6 mol · kg − 1 ; (b) details of the fine structure o
Fig. 3 The contribution of the most significant vectors to the total absorbance at 25 and 200 °C, where matrices U and S are the results of SVD of the absorbance matrix
Fig. 4 Absorbance of aqueous acridine solutions at 25 ◦ C as a function of pH for [Acr tot ] concentrations ranging from 3.4 × 10 − 6 to
+6

Références

Télécharger maintenant ( PDF - 15 Page - 579.22 KB )

Documents relatifs

Vapor-Liquid equilibrium measurements for 5 binary mixtures involving HFO-1336mzz(E) at temperatures from 313 to 353 K and pressures up to 2.735 MPa

Pressure in the cell is measured with a pressure transducer DRUCK, model PTX 611, range 0-6MPa connected to the same Agilent data acquisition unit as the two Pt100.. The

Eutectic melting of Fe-3 at% Si-4 at% C up to 200 GPa and implications for the Earth's core

Sound velocities and density measurements of 444 solid hcp-Fe and hcp-Fe–Si (9 wt.%) alloy at high pressure: Constraints on the Si abundance in 445 the Earth’s inner core. 448

Study of potential leakage on several stressed fittings for hydrogen pressures up to 700 bar

That is the reason why in this work several kinds of tube fittings and of stresses were considered to establish a realistic test matrix close to the real-life conditions of

Phase equilibrium data for the hydrogen sulphide + methane system at temperatures from 186 to 313 K and pressures up to about 14 MPa

Figure 1: Flow diagram of the equipment: C: Carrier Gas, EC: Equilibrium Cell, FV: Feeding Valve, LB: Liquid Bath, LS: Liquid Sampler, PP: Platinum Probe, MC:

An experimental and modeling study of the oxidation of n-heptane, ethylbenzene, n-butylbenzene in a jet-stirred reactor at pressures up to 10 bar

In the context of better understanding pollutant formation from internal combustion engines, new experimental speciation data were obtained in a high-pressure

The temperature dependence of heavy-ion damage in iron: a microstructural transition at elevated temperatures

At T irr ≤ 400 o C, the microstructure was dominated by round or irregular non-edge dislocation loops of interstitial nature and with Burgers vectors b = ½<111>,

METAL-NONMETAL-DENSE PLASMA TRANSITION IN MERCURY AT HIGH TEMPERATURES UP TO - 2200 K AND HIGH PRESSURES UP TO 0.35GPa

One of the thermocouples and one counter electrode were welded in the upper closed end of the container (up- per "hot joint") and others were mounted at the lower end

The stability of bcc-Fe at high pressures and temperatures with respect to tetragonal strain

Calculations on the bcc structure in the hexagonal setting at 0 K and at a fixed volume of 7.2 Å 3 per atom (~260 GPa) show that the bcc phase spontaneously distorts to the ω