• Aucun résultat trouvé

NEURAL MODEL IDENTIFICATION OFMETALLURGICAL PROCESS IN OXYGENCONVERTER

N/A
N/A
Protected

Academic year: 2021

Partager "NEURAL MODEL IDENTIFICATION OFMETALLURGICAL PROCESS IN OXYGENCONVERTER"

Copied!
1
0
0

Texte intégral

(1)

12th International Multidisciplinary Scientific GeoConference SGEM 2012 2012

NEURAL MODEL IDENTIFICATION OF METALLURGICAL PROCESS IN OXYGEN

CONVERTER

Kaddour Gherfi, Houssine Bendjama, Salah Bouhouche, Hezem Meradi

Abstract : In the iron and steel industry domain, the adjustment of the percentage of the chemical composition of the cast iron in the oxygen converter is essential to produce steel; this operation is to carry out by an oxygen lance in the liquid cast iron without expenditure of energy (fuel). The oxygen injected makes chemical reactions with the cast iron elements, and according to the quantity of oxygen injected we can fix the percentage of each chemical element in steel. It is sometimes extremely difficult to modeling the variations of the chemical compositions with the dynamic nonlinear. In this work, the identification of the nonlinear relations are studied by using the neural networks, the real cases were adapted using data banks of the process, the results obtained are presented and discussed.

Keywords : modeling, neural networks, oxygen converter.

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Documents relatifs

Small but, cru- cial quantum corrections in n =% ee and 4iTp^ ee are taken into account quantitatively in the weakly coupled hydrogenic phase.. The ^ D system e-p-Fe is shown to

Based on four models of knowledge management: the SECI model, CYNEFIN model, the FIVE DISCIPLINES model and the SEVEN DIMENSIONS model, supported by the

Abstract : In this paper our principal study is the development of a model of synthesis presents the variation of the molten steellevel in the ingot mould of continuous casting by

Among the principal factors which contains in the continuous casting process, there are two things, the molten steel level in the ingot and the extraction speed, the variation of

Abstract : The use of hydrogen as a clean and storable energy is involved in the substitution of coking coal from natural gas for the reduction of iron oxides by the reduction of

The use of hydrogen as a clean and storable energy is involved in the substitution of coking coal from natural gas for the reduction of iron oxides by the reduction of iron oxides

2014 The magnetic properties of iron in chromium and in chromium rich alloys are tenta- tively interpreted in terms of a local coupling with the spin modulation of

Measurement of the isotopic composition of dissolved iron in the open ocean.. Lacan, Amandine Radic, Catherine Jeandel, Franck Poitrasson, Géraldine Sarthou, Catherine Pradoux,