• Aucun résultat trouvé

Toldbod 155 Bollard / Alu col text /

N/A
N/A
Protected

Academic year: 2022

Partager "Toldbod 155 Bollard / Alu col text /"

Copied!
12
0
0

Texte intégral

(1)

Toldbod 155 Bollard / Alu col text / 5747293816

Design

Louis Poulsen A/S Weight

Min: 2.134 kg Max: 2.155 kg Finish

Alu col text, Blk text

(2)

Finish

Aluminium coloured with textured surface or black with textured surface, powder coated.

Materials Fixture head: Chilled casting aluminium. Shield: Laser cut acrylic satine. Arm: Chilled casting

aluminium. Post: Extruded aluminium.

Mounting

Terminal block: 1x5x2.5mm². Cable entries: 2x bottom entries to Ø 17mm.

Looping: Approved, max. 5x2,5mm².

Sizes and weights Width x Height x Length (mm) 155 x 900 x 267 Max 2.2 kg

Class

Ingress protection IP44. Electric shock protection I w. ground. IK05.

Specification notes The innovation of light sources is ongoing. Consequently we only inform about the max. wattages. On

www.louispoulsen.com we update a list of recommendable light sources.

Light source & energy class Energy class A+ - E

Light source 1x40W E14

(3)

Data specifications

Class I

Width 155

Length 267

Height 900

Net Weight 2.134

Light source 1x40W E14

Bug Rating B0 U1 G0

IP class 44

UGR Transversal / Axial 19.4/19.4

IK class 05

(4)

Cartesian Isolux Polar

Light distribution diagrams

(5)

Spareparts & accessories

TOLDBOD WALL/BOLLARD 155 SHIELD 5743145528

PH3-2½ BOL./TOLDBOD BOL.EARTH ANCHOR NEW 5747293696

(6)

Toldbod 155 Bollard / Blk text / 5747293832

Design

Louis Poulsen A/S Weight

Min: 2.134 kg Max: 2.155 kg Finish

Alu col text, Blk text

(7)

Finish

Aluminium coloured with textured surface or black with textured surface, powder coated.

Materials Fixture head: Chilled casting aluminium. Shield: Laser cut acrylic satine. Arm: Chilled casting

aluminium. Post: Extruded aluminium.

Mounting

Terminal block: 1x5x2.5mm². Cable entries: 2x bottom entries to Ø 17mm.

Looping: Approved, max. 5x2,5mm².

Sizes and weights Width x Height x Length (mm) 155 x 900 x 267 Max 2.2 kg

Class

Ingress protection IP44. Electric shock protection I w. ground. IK05.

Specification notes The innovation of light sources is ongoing. Consequently we only inform about the max. wattages. On

www.louispoulsen.com we update a list of recommendable light sources.

Light source & energy class Energy class A+ - E

Light source 1x40W E14

(8)

Data specifications

Class I

Width 155

Length 267

Height 900

Net Weight 2.155

Light source 1x40W E14

Bug Rating B0 U1 G0

IP class 44

UGR Transversal / Axial 19.4/19.4

IK class 05

(9)

Cartesian Isolux Polar

Light distribution diagrams

(10)

Spareparts & accessories

TOLDBOD WALL/BOLLARD 155 SHIELD 5743145528

PH3-2½ BOL./TOLDBOD BOL.EARTH ANCHOR NEW 5747293696

(11)

Louis Poulsen A/S • Kuglegaardsvej 19-23 • 1434 Copenhagen K • Denmark • Tel. +45 70 33 14 14 • info@louispoulsen.dk • www.louispoulsen.com

DA

Støv aftørres med en tør, blød klud. Fedtpletter og lignende kan fjernes med en blød klud opvredet i lunkent vand (<50° C) tilsat mildt rengøringsmiddel.

Brug aldrig rengøringsmidler med slibemiddel eller opløsningsmidler.

EN

Wipe off dust with a dry, soft cloth. Remove greasy spots etc. with a soft cloth damp- ened in lukewarm water (<50° C) with a mild detergent.

Never use detergents containing abrasives and solvents.

DE

Staub bitte mit einem trockenen, weichen Lappen abwischen. Fettflecke und dgl. mit einem feuchten, in lauwarmem Wasser (<50° C) mit mildem Reinigungsmittel ausge- wrungenen Lappen entfernen.

Niemals Reinigungsmittel mit Schleifmittel oder Lösungsmittel verwenden.

FR

Essuyez la poussière avec un chiffon sec et doux. Enlevez les points de saleté etc. avec un chiffon doux impregné d’eau claire tiède et de détergent doux.

Ne jamais utiliser de détergents contenant des abrasifs et des solvants.

SV

Lampan dammtorkas med en torr, mjuk trasa. Fettfläckar tas bort med ljummet vatten (<50° C) utblandat med milt rengöringsmedel.

Använd aldrig rengöringsmedel som innehåller slipmedel eller lösningsmedel

ES

Limpiar con paño seco y suave. Quitar manchas de grasa y otras con paño suave hume- decido con agua templada (<50° C) con detergente poco agresivo.

Nunca use detergentes que contengan abrasivos y disolventes.

IT

Pulire la polvere esterna con un panno morbido e asciutto. Rimuovere macchie di grasso ecc. con un panno morbido inumidito in acqua tiepida (<50° C )e con un detergente leggero.

Non usare mai detergenti contenenti abrasivi o solventi.

FI

Pyyhi pölyt kuivalla pehmeällä liinalla. Poista rasvatahrat miedolla pesuaineella ja haa- lealla vedellä (<50° C) kostutetulla pehmeällä liinalla.

Älä koskaan käytä liuottimia tai hankausaineita sisältäviä pesuaineita.

Lyskilde Light source Leuchtmittel Ljuskälla

Sorgenti luminose Source lumineuse Fuente de luz Valonlähde

Spænding/frekvens Voltage/frequency Spannung/frenquenz Spänning/frekvens Tensione/frequenza Voltage/frequence Tensión/frecuencia Jännite/taajuus

Vægt Weight Gewicht Vikt

Peso/ingombro Poids

Peso Paino

Tæthedsklasse Ingress protection Schutzart

Kapslingsklass Grado di protezione Indice de protection Clase de protección Kotelointiluokka

Vandalklasse Impact protection Stoßfestigkeit Vandalklass

Protezione contro gli urti Protection aux chocs mécaniques Protección contra impactos Iskunkestävyys

Isolationsklasse

Electric shock protection Schutzklasse

Isolationsklass Classe di isolamento Protection au choc electrique Clase de aislamiento Eristysluokka

1x40W E14 220-240V/50-60Hz 2,0 kg Cl. I IP44 IK05

Toldbod 155 Bollard

267

900

155

Design Louis Poulsen A/S

51590-I1

(12)

51590-I1

2 1

3

3 mm 5 mm

DA: Find “LYSKILDEOVERSIGT” her: www.louispoulsen.com EU: Find “LIGHT SOURCE OVERVIEW” here: www.louispoulsen.com

Références

Documents relatifs

J.L. Girard and J.L.. Channel 5 HKL software was used to index the grains’ orientation. An X-ray diffraction experiment in Θ-2Θ scan was performed on each sample. These

Photometric reconstruction of a dynamic textured surface from just one color image acquisition.. Benjamin Bringier, David Helbert,

In this section we rst prove our main lower semicontinuity result, concerning a class of free discontinuity functionals with general bulk and surface energy densities.. In the

In this paper, a dataset, named 3DBodyTex, of static 3D body scans with high-quality texture information is pre- sented along with a fully automatic method for body model fitting to

Graphene- based textured surface by pulsed laser deposition as a robust platform for surface enhanced Raman scattering applications... Graphene-based textured surface by pulsed

We draw particular attention to some non-standard effects associated with the propagation of Love waves in con- ventional isotropic elastic half spaces coated with thin films

The results obtained show that the mostimportant characteristics of the contact like minimal film thickness, maximal pressure,axial fluid flow and friction torque can be

Texturing the contact inlet region (cases 10 to 12) has a modest and negative effect on the bearing performances; + 0.1% for the maximum pressure, -0.2% for the film thickness and no