• Aucun résultat trouvé

Modeling of Electromagnetic Behavior of CompositeThin Layers using Genetic Algorithm

N/A
N/A
Protected

Academic year: 2021

Partager "Modeling of Electromagnetic Behavior of CompositeThin Layers using Genetic Algorithm"

Copied!
1
0
0

Texte intégral

(1)

The 5th International Conference on Electrical Engineering 2017

Modeling of Electromagnetic Behavior of

CompositeThin Layers using Genetic Algorithm

Abdelmalek REDDAF, Karim FERROUDJI, Mounir BOUDJERDA, Khaled Hamdi Chérif, Isslam Bouchachi, fatima Djerfaf

Abstract : In this paper, we present a new model using the highfrequency electromagnetic simulator for several binary mixtureswhere the load is in the lossless thin film form with a permittivityof (? = 100, 200, 300, and 400) and for various thickness values ina range of 10 µm to 250 µm with respect to the host matrix. Themodel operates in a variety of frequencies from 8.2 GHz to 12.4GHz. The effective permittivity of composites is evaluated usingNicholson Ross Weir (NRW) algorithm in a rectangularwaveguide. The implementation of NRW algorithm is conductedon various samples simulated by HFSS, in order to estimate thedielectric composite behavior. Furthermore, we employ a geneticalgorithm methodology (GA) for the filling factor optimization ofthe proposed model by Mosallaei. The obtained results show agood agreement with the theoretical models, which ensure thevalidity of our proposed model for characterizing theelectromagnetic behaviour of dielectric thin films.

Keywords : Thin films, electromagnetic behaviour, dielectric mixtures, Genetic optimization, mico wave.

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Documents relatifs

The 5th International Conference on Electrical Engineering – Boumerdes (ICEE-B) October 29-31, 2017, Boumerdes, Algeria.. Comparisons effective permittivity between GA model and

To examine the effect of the orientation of the folds of our laminate (Carbon-Epoxy) on the factor of buckling criticizes λcr, we took the data of the sequences of

In this work, we havepresented the principles of the genetic algorithm functioning , itsapplication to the laminated composites and to the originaltechnique of coding which

In this paper, we use a genetic algorithm (GA) based optimization to generate a suitable configuration of the PLL-TRNG, such that it is secure and reaches high output bit rate..

Since the power density and exposure range for the effect are within the range of Table ”INH+ENS” corresponding to the experimental findings in [78] it is unlikely that

A host of references on direct modeling of anisotropic structures with emphasis on eddy-current (mostly meaning exploration of conductive, carbon-fiber-reinforced

4: Mechanical behaviour of Cu films on Cu substrates: (a) Normalized hardness and stiffness curves as a function of normalized indentation depth; and (b) stress-strain curves

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des