Library for Building Automation

(1)

Library for Building Automation

Function Block Description for KNX Applications

Last Update: 22.01.2009

(2)

Copyright © 2009 by WAGO Kontakttechnik GmbH & Co. KG All rights reserved.

WAGO Kontakttechnik GmbH & Co. KG Hansastraße 27

D-32423 Minden

Phone: +49 (0) 571/8 87 – 0 Fax: +49 (0) 571/8 87 – 1 69 E-mail: [email protected]

Web: http://www.wago.com

Technical Support

Phone: +49 (0) 571/8 87 – 777 Fax: +49 (0) 571/8 87 – 8777 E-mail: [email protected]

Every conceivable measure has been taken to ensure the accuracy and completeness of this documentation. However, as errors can never be fully excluded, we appreciate any information or suggestions for improving the documentation.

We wish to point out that the software and hardware terms, as well as the trademarks of companies used and/or mentioned in the present manual, are generally protected by trademark or patent.

Subject to design changes WAGO Kontakttechnik GmbH & Co. KG P.O. box 2880 • D-32385 Minden Phone: 05 (71) 8/87 – 0 E-Mail: [email protected]

2

(3)

Important Information

WAGO-I/O-PRO CAA library for building automation

List of Contents:

Important Information 5

Copyright Protection... 5

Personnel Qualification... 5

Intended Use ... 5

Scope of Validity ... 6

Binary Input 7 Binary Input for Two-level Dimming (FbBinaryInput_2Dimming) ... 7

Binary Input for Single-level Dimming (FbBinaryInput_1Dimming) ... 9

Binary Input for Two-level Sunblind (FbBinaryInput_2Sunblind) ... 11

Binary Input for Single-level Sunblind (FbBinaryInput_1Sunblind) ... 13

Binary Input 4-Channel Switch (FbBinaryInput_Switch_4) ... 15

Dimming Actuator 17 Dimming Actuator, 4-Channel (FbDimm_actuator_4)... 17

Dimming Actuator, 8-Channel (FbDimm_actuator_8)... 20

Dimming Actuator, 12-Channel (FbDimm_actuator_12)... 21

Dimming Actuator, 16-Channel (FbDimm_actuator_16)... 22

Sunblind Actuator 23 Sunblind Actuator, 4-Channel (FbSunblind_actuator_4) ... 23

Sunblind Actuator, 8-Channel (FbSunblind_actuator_8) ... 26

Sunblind Actuator, 12-Channel (FbSunblind_actuator_12) ... 27

Sunblind Actuator, 16-Channel (FbSunblind_actuator_16) ... 28

Switch Actuator 29 Switch Actuator, 4-Channel (FbSwitch_actuator_4)... 29

Switch Actuator, 8-Channel (FbSwitch_actuator_8)... 32

Switch Actuator, 12-Channel (FbSwitch_actuator_12) ... 33

Switch Actuator, 16-Channel (FbSwitch_actuator_16) ... 34

Conversion 35 Dim Signal Evaluation (FbDimmSignal)... 35

Visual Display Elements 37 Configuration of Binary Input (BinaryInput_switch_visu) ... 37

Configuration of Dimming Actuator (Dimm_actuator_visu) ... 39

Configuration of Sunblind Actuator (Sunblind_actuator_visu)... 41

(4)

Copyright Protection

4

(5)

Important Information

Important Information

To ensure quick installation and start-up of the units, we strongly recommend that the following information and explanations are carefully read and adhered to.

Copyright Protection

This document, including all figures and illustrations contained therein, is subject to copyright. Any use of this document that infringes the copyright provisions stipulated herein, is not permitted.

Reproduction, translation and electronic and phototechnical archiving and

amendments require the written consent of WAGO Kontakttechnik GmbH & Co.

KG, Minden. Non-observance will entail the right of claims for damages.

WAGO Kontakttechnik GmbH & Co. KG reserves the right to enact changes that serve technical progress.

All rights arising from the issue of a patent, or the legal protection of utility patents, are reserved to WAGO Kontakttechnik GmbH & Co. KG. Third-party products are always indicated without any notes concerning patent rights. Thus, the existence of such rights must not be excluded.

Personnel Qualification

The use of the product detailed in this document is exclusively geared to specialists having qualifications in PLC programming, electrical specialists or persons instructed by electrical specialists who are also familiar with the valid standards. WAGO Kontakttechnik GmbH & Co. KG declines any liability resulting from improper action and damage to WAGO products and third party products due to non-observance of the information contained in this document.

Intended Use

For each individual application, the components are supplied from the factory with a dedicated hardware and software configuration. Modifications are only admitted within the framework of the possibilities documented in this document.

All other changes to the hardware and/or software and the non-conforming use of the components entail the exclusion of liability on part of WAGO Kontakttechnik GmbH & Co. KG.

Please direct any requirements pertaining to a modified and/or new hardware or

software configuration directly to WAGO Kontakttechnik GmbH & Co. KG.

(6)

Scope of Validity

Scope of Validity

This application note is based on the stated hardware and software of the specific manufacturer as well as the associated documentation. This application note is therefore only valid for the described installation.

New hardware and software versions may need to be handled differently.

Please note the detailed description in the specific manuals.

6

(7)

Binary Input for Two-level Dimming (FbBinaryInput_2Dimming)

Binary Input

Binary Input for Two-level Dimming (FbBinaryInput_2Dimming)

WAGO-I/O PRO CAA Library Elements

Category: Building Services

Name: FbBinaryInput_2Dimming

Type: Function Function block X Program Name of library: KNX_Applications_01.lib

Applicable to: KNX Controller 750-849 or KNX Module 753-646 Libraries used: KNX_Standard_1xx.lib

SysLibGetAddress.lib mod_com.lib

Input parameter: Data type: Comment:

xDimmUP BOOL Input signal for increasing brightness and power- on

xDimmDOWN BOOL Input signal for decreasing brightness and power-off

tShortSwitch TIME Brief period allocated to push the button Default setting = t#500ms

Input/output parameter: Data type: Comment:

typKNX typKNX KNX transmit and receive data (internal) See FbKNX_Master_646 for description Illustration:

Function description:

The function block FbBinaryInput_2Dimming serves as a dimming sensor and can control an external KNX dimming actuator via two binary input signals (switches).

This function block may only be used with the FbKNX_Master_xxx block from the KNX_Standard_1xx.lib library.

The two function blocks are synchronized via variable structure "typKNX" and must be linked to one another.

Using the switch commands "xDimmUP" or "xDimmDOWN", will switch lighting on and off (by briefly tapping the button) or dim/brighten lighting (by depressing the button for a longer period of time).

(8)

Binary Input for Two-level Dimming (FbBinaryInput_2Dimming)

Dimming and brightening is performed via 4-bit dimming object by the key being actuated for a longer period of time (parameterizable actuation time

“tShortSwitch”).

A stop telegram is transmitted via 4-bit dimming object when the key is released.

This discontinues the dimming process in the KNX dimming actuator.

Brief actuation (pressing) of the key causes the lighting to be switched on/off. The switching telegram is transmitted via 1-bit switching object.

The following communication objects are generated by the function block:

Object name¹⁾: Function: Type: Direction:

xxx.yyy.OUT_Switch[1] Switch 1 bit Output

xxx.yyy.Out_Dimming[1] Dimming 4 bit Output

1) The prefix xxx. is determined by the program name (e.g., PLC _PRG).

The prefix yyy. is determined by the entity name of the function block.

8

(9)

Binary Input for Single-level Dimming (FbBinaryInput_1Dimming)

Binary Input for Single-level Dimming (FbBinaryInput_1Dimming)

WAGO-I/O PRO CAA Library Elements

Name: FbBinaryInput_1Dimming

xDimmUP_DOWN BOOL Input signal for dimming and power-on tShortSwitch TIME Brief period allocated to push the button

Default setting = t#500ms Input/output parameter: Data type: Comment:

The function block FbBinaryInput_1Dimming serves as a dimming sensor and can control an external KNX dimming actuator via binary input signal (switch).

Using the switch commands at the input "xDimmUP_Down", lighting can be switched on and off (by briefly tapping the key) or dimmed and brightened (by depressing the key for a longer period of time).

Dimming and brightening is performed via 4-bit dimming object by longer actuation of the key (parameterizable actuation time “tShortSwitch”).

(10)

Binary Input for Single-level Dimming (FbBinaryInput_1Dimming)

A stop telegram is transmitted via 4-bit dimming object when the key is released.

This discontinues the dimming process in the KNX dimming actuator. Brief actuation (pressing) of the key causes the lighting to be switched on/off. The switching

telegram is transmitted via 1-bit switching object. The current switching or dimming command is dependent on the previously transmitted command. For example, if the lighting is switched off, it will be switched on the next time the key is briefly pressed.

xxx.yyy.OUT_Switch[1] Switch 1 bit Output

xxx.yyy.Out_Dimming[1] Dimming 4 bit Output

10

(11)

Binary Input for Two-level Sunblind (FbBinaryInput_2Sunblind)

Binary Input for Two-level Sunblind (FbBinaryInput_2Sunblind)

WAGO-I/O PRO CAA Library Elements

Name: FbBinaryInput_2Sunblind

xMove_UP BOOL Sunblind UP/Lamellae/Stop

xMove_DOWN BOOL Sunblind DOWN/Lamellae/Stop

The function block FbBinaryInput_2Sunblind serves as a sunblind sensor and can control an external KNX sunblind actuator via two binary input signals (switches).

A telegram for "Adjust/Stop lamellae" is transmitted via 1-bit stop/step object when one of the keys is briefly pressed (parameterizable actuation time "tShortSwitch").

If the key is held depressed longer than the parameterized actuation time, the function block then transmits the run command "Sunblind UP/DOWN" via the 1-bit motion object.

(12)

Binary Input for Two-level Sunblind (FbBinaryInput_2Sunblind)

xxx.yyy.OUT_Movement[1] Run command Sunblind UP/DOWN

1 bit Output xxx.yyy.OUT_Stop_Step[1] Adjust/Stop lamellae 1 bit Output

12

(13)

Binary Input for Single-level Sunblind (FbBinaryInput_1Sunblind)

Binary Input for Single-level Sunblind (FbBinaryInput_1Sunblind)

WAGO-I/O PRO CAA Library Elements

Name: FbBinaryInput_1Sunblind

xMoveUP_DOWN BOOL Sunblind UP/DOWN/Lamellae/Stop

The function block FbBinaryInput_1Sunblind serves as a sunblind sensor and can control an external KNX sunblind actuator via binary input signal (switches). This function block may only be used with the FbKNX_Master_xxx block from the KNX_Standard_1xx.lib library.

A telegram for "Adjust/Stop lamellae" is transmitted via 1-bit stop/step object when one the key is pressed briefly (parameterizable actuation time "tShortSwitch").

If the key is held depressed longer than the parameterized actuation time, the function block then transmits the run command "Sunblind UP/DOWN" via the 1-bit motion object.

The subsequent motion/direction depends on the previous action. For example, if the sunblind was previously raised, it will be lowered the next time the key is pressed for a longer period.

To consecutively perform several movements of the lamellae in the same direction, internal switching of the direction of motion is executed with a three-second delay when the key is briefly pressed.

(14)

Binary Input for Single-level Sunblind (FbBinaryInput_1Sunblind)

xxx.yyy.OUT_Movement[1] Run command Sunblind UP/DOWN

1 bit Output xxx.yyy.OUT_Stop_Step[1] Adjust/Stop lamellae 1 bit Output

14

(15)

Binary Input 4-Channel Switch (FbBinaryInput_Switch_4)

Binary Input 4-Channel Switch (FbBinaryInput_Switch_4)

WAGO-I/O PRO CAA Library Elements

Category: Building Services Name: FbBinaryInput_Switch_4

xInput_0 BOOL Input signal, Channel 0 xInput_1 BOOL Input signal, Channel 1 xInput_2 BOOL Input signal, Channel 2 xInput_3 BOOL Input signal, Channel 3 Input/output parameter: Data type: Comment:

typKNX typKNX KNX transmit and receive data (internal) See FbKNX_Master_646 for description typBI_4 typBI_4 Variable with parameter data

Illustration:

The function block FbBinaryInput_Switch_4 serves as a four-point switching sensor and can transmit 1-bit KNX telegrams by actuation of binary input signals.

Parameters can be set for each input ("xInput_0" to "xInput_3") to determine the reaction to a rising, or falling, input slope. For example, parameters can be assigned defining that an activation telegram be transmitted on a rising slope and that

telegram updating is not to be conducted with a falling slope. In this case, the corresponding communication object would only transmit an ON telegram. Refer to Section "Visual Display Elements" for further parameterization explanations.

(16)

Binary Input 4-Channel Switch (FbBinaryInput_Switch_4)

xxx.yyy.OUT_Switch[0] Switching command 0 1 bit Output xxx.yyy.OUT_Switch[1] Switching command 1 1 bit Output xxx.yyy.OUT_Switch[2] Switching command 2 1 bit Output xxx.yyy.OUT_Switch[3] Switching command 3 1 bit Output

Note:

• The KNX_Applications_01.lib library provides a visualization object for the configuration of this function block with the name BinaryInput_switch_visu (see Visual Display Elements).

• The variable at input "typBI_4" contains all the parameter data required for configuration of the binary input. This variable should be saved as

VAR RETAIN PERSISTENT. Otherwise, the data will be lost after a reset or program download.

16

(17)

Dimming Actuator, 4-Channel (FbDimm_actuator_4)

Dimming Actuator

Dimming Actuator, 4-Channel (FbDimm_actuator_4)

WAGO-I/O PRO CAA Library Elements

Name: FbDimm_actuator_4

xPushbutton_UP_0 BOOL Dim up extension input ON/OFF Channel 0

xPushbutton_DOWN_0 BOOL Dim down extension input ON/OFF Channel 0

typKNX typKNX KNX transmit and receive data (internal) See FbKNX_Master_646 for description typDA_4 typDA_4 Variable with parameter data

Output parameters: Data type: Comment:

xSwitch_state_0 BOOL Switching output, Channel 0 xSwitch_state_1 BOOL Switching output, Channel 1 xSwitch_state_2 BOOL Switching output, Channel 2 xSwitch_state_3 BOOL Switching output, Channel 3

(18)

wDimm_value_0 WORD Dimming output, Channel 0 [0–32767]

Illustration:

he function block FbDimm_actuator_4 serves as a four-point KNX dimming actuator and can be controlled using corresponding KNX communication objects.

This function block may only be used with the FbKN X_Master_xxx block from the KNX _Standard.lib library.

The two function blocks are synchronized via variable structure "typKNX" and must be linked to one an other.

The inputs "xPushbutton_UP_x" and "xPushButton_DOWN_x" enable addition activation of the dimming actuator using standard buttons (extension mode).

Pressing the key for a longer period (>500 ms), dims the lighting. Briefly actuating the key (<500 ms) switches the lighting on/off.

The outputs "xSwitch_state_x" show the switching status for the dimming actuator.

The brightness values for the individual dimming channels are signaled via outputs

"wDimm_value_x", with the value 32767 defined as 100 % dimming value.

This function block can be parameterized using a visualization element. Refer to Section "Visual Display Elements" for further parameterization explanations.

The following functions are supported by the function block:

• Central ON/OFF for switching channels

• Adjustable dimming speed

• Activation response with and without memory function

• Adjustable minimum and maximum dimming values

• Adjustable output response after restoration of voltage

• Switching/dimming commands controlled via KNX communication objects, extension inputs or visualization

• Switching status return message via KNX communication object

18

(19)

xxx.yyy.IN_Central_ON_OFF Central ON/OFF 1 bit Input xxx.yyy.IN_Switch[0] ON/OFF, Channel 0 1 bit Input xxx.yyy.IN_Switch[1] ON/OFF, Channel 1 1 bit Input xxx.yyy.IN_Switch[2] ON/OFF, Channel 2 1 bit Input xxx.yyy.IN_Switch[3] ON/OFF, Channel 3 1 bit Input xxx.yyy.IN_Dimm[0] Dimming, Channel 0 4 bit Input xxx.yyy.IN_Dimm[1] Dimming, Channel 1 4 bit Input xxx.yyy.IN_Dimm[2] Dimming, Channel 2 4 bit Input xxx.yyy.IN_Dimm[3] Dimming, Channel 3 4 bit Input xxx.yyy.IN_Dimm_value[0] Setting for absolute

dimming value 0–100 %, Channel 0

1 byte Input

xxx.yyy.IN_Dimm_value[1] Setting for absolute dimming value 0–100 %, Channel 1

1 byte Input

xxx.yyy.OUT_SwitchFeedback[0] Return message,

Switching status, Channel 0

1 bit Output

Note:

• The KNX_Applications_2xx.lib library provides a visualization object for the configuration of this function block with the name Dimm_actuator_visu (see Section "Visual Display Elements").

• The variable at input "typDA_4" contains all the parameter data required for configuration of the dimming actuator. This variable should be saved as VAR RETAIN PERSISTENT. Otherwise, the data will be lost after a reset or program download.

(20)

Dimming Actuator, 8-Channel (FbDimm_actuator_8)

WAGO-I/O PRO CAA Library Elements

Type: Function Function block X Program Name of library: KNX_Applications_2xx.lib

typDA_8 typDA_8 Variable with parameter data Illustration:

See function block description Dimming Actuator, 4-Channel (FbDimm_actuator_4).

The only difference with this actuator is the number of dimming channels (8 vs. 4).

20

(21)

Dimming Actuator, 12-Channel (FbDimm_actuator_12)

WAGO-I/O PRO CAA Library Elements

(22)

Dimming Actuator, 16-Channel (FbDimm_actuator_16)

WAGO-I/O PRO CAA Library Elements

22

(23)

Sunblind Actuator, 4-Channel (FbSunblind_actuator_4)

Sunblind Actuator

Sunblind Actuator, 4-Channel (FbSunblind_actuator_4)

WAGO-I/O PRO CAA Library Elements

Category: Building Services Name: FbSunblind_actuator_4

xPushbutton_UP_0 BOOL Extension input Channel 0 for moving UP and stopping sunblind

xPushbutton_DOWN_0 BOOL Extension input Channel 0 for moving DOWN and stopping sunblind

typKNX typKNX KNX transmit and receive data (internal) See FbKNX_Master_646 for description typBA_4 typBA_4 Variable with parameter data

(24)

xUP_0 BOOL Sunblind UP, Channel 0

xDOWN_0 BOOL Sunblind DOWN, Channel 0

Illustration:

The function block FbSunblind_actuator_4 serves as a four-point KNX sunblind actuator and can be controlled using corresponding KNX communication objects.

The inputs "xPushbutton_UP_x" and "xPushButton_DOWN_x" enable additional activation of the sunblind actuator using standard buttons (extension mode).

A movement command for the sunblind is issued by pressing the key for a longer period (>500 ms). Briefly pressing of the key (<500 ms) issues a Stop command. or lamellae to be adjusted (short movement command).

The outputs "xUP_x" and "xDOWN_x" are used for controlling the sunblind motor for the directions UP and DOWN.

This function block can be parameterized using a visualization element. Refer to Section "Visual Display Elements" for further parameterization explanations.

• Central command for sunblind UP/DOWN

• Adjustable sunblind run time

• Adjustable pause period when changing direction of movement

• Adjustable running time for short movement commands

• Movement to a sun protection position, with subsequent adjustment of lamellae

24

(25)

• Movement commands can be controlled via KNX communication objects, extension inputs or visualization.

• Assignment of a compass direction for each sunblind channel

• Position feedback signals via KNX communication objects

xxx.yyy.IN_Central_UP_DOWN Central UP/DOWN 1 bit Input xxx.yyy.IN_Sun_South Sun protection, South 1 bit Input xxx.yyy.IN_Sun_East Sun protection, East 1 bit Input xxx.yyy.IN_Sun_West Sun protection, West 1 bit Input xxx.yyy.IN_SafetyPosition Safety position 1 bit Input xxx.yyy.IN_Movement[0] Motion object UP/DOWN,

Channel 0

1 bit Input xxx.yyy.IN_Movement[1] Motion object UP/DOWN,

Channel 1

Channel 2

Channel 3

1 bit Input xxx.yyy.IN_Stop_Step[0] Stop/Step object, Channel

0

1 bit Input xxx.yyy.IN_ Stop_Step[1] Stop/Step object,

Channel 1

1 bit Input xxx.yyy.IN_ Stop_Step[2] Stop/Step object,

Channel 2

1 bit Input xxx.yyy.IN_ Stop_Step[3] Stop/Step object, Channel

3

1 bit Input xxx.yyy.OUT_Feedback_Pos[0] Position feedback signal,

Channel 0

1 byte Output xxx.yyy.OUT_Feedback_Pos[1] Position feedback signal,

Channel 1

Channel 2

Channel 3

1 byte Output

Note:

• The KNX_Applications_2xx.lib library provides a visualization object for the configuration of this function block with the name Sunblind_actuator_visu (see Section "Visual Display Elements").

• The variable at input "typBA_4" contains all the parameter data required for configuration of the dimming actuator. This variable should be saved as VAR RETAIN PERSISTENT. Otherwise, the data will be lost after a reset or program download.

(26)

Sunblind Actuator, 8-Channel (FbSunblind_actuator_8)

WAGO-I/O PRO CAA Library Elements

typBA_8 typBA_8 Variable with parameter data Illustration:

See function block description Sunblind Actuator, 4-Channel

(FbSunblind_actuator_4). The only difference with this actuator is the number of sunblind channels (8 vs. 4).

26

(27)

Sunblind Actuator, 12-Channel (FbSunblind_actuator_12)

WAGO-I/O PRO CAA Library Elements

(28)

Sunblind Actuator, 16-Channel (FbSunblind_actuator_16)

WAGO-I/O PRO CAA Library Elements

28

(29)

Switch Actuator, 4-Channel (FbSwitch_actuator_4)

Switch Actuator

Switch Actuator, 4-Channel (FbSwitch_actuator_4)

WAGO-I/O PRO CAA Library Elements

Category: Building Services Name: FbSwitch_actuator_4

xPushbutton_ON_0 BOOL Extension inputs/Switch ON Channel 0 xPushbutton_OFF_0 BOOL Extension inputs/Switch OFF Channel 0 xPushbutton_ON_1 BOOL Extension inputs/Switch ON Channel 1 xPushbutton_OFF_1 BOOL Extension inputs/Switch OFF Channel 1 xPushbutton_ON_2 BOOL Extension inputs/Switch ON Channel 2 xPushbutton_OFF_2 BOOL Extension inputs/Switch OFF Channel 2 xPushbutton_ON_3 BOOL Extension inputs/Switch ON Channel 3 xPushbutton_OFF_3 BOOL Extension inputs/Switch OFF Channel 3 Input/output parameter: Data type: Comment:

typKNX typKNX KNX transmit and receive data (internal) See FbKNX_Master_646 for description typSA_4 typSA_4 Variable with parameter data

xSwitch_0 BOOL Switching output, Channel 0 xSwitch_1 BOOL Switching output, Channel 1 xSwitch_2 BOOL Switching output, Channel 2 xSwitch_3 BOOL Switching output, Channel 3

(30)

Illustration:

The function block FbSwitch_actuator_4 serves as a four-point KNX switching actuator and can be controlled using corresponding KNX communication objects.

This function block may only be used together with the FbKNX_Master_xxx block from the KNX_Standard_1xx.lib library.

The inputs "xPushbutton_ON_x" and "xPushButton_OFF_0" enable additional control of the switching actuator using standard buttons (extension mode). The following must be taken into account for this:

The switching channels can be activated (switched on) using the variable

“xPushbutton_ON_x”; they can be deactivated via input “xPushbutton_OFF_x”.

The outputs "Switch_state_x" show the switching statuses for the actuator. This function block can be parameterized using a visualization element. Refer to Section

"Visual Display Elements" for further parameterization explanations.

• Central ON/OFF for switching channels

• Stairwell lighting function with or without retrigger

• Alert before end of stairwell lighting cycle

• Activation/Deactivation delay

• Adjustable output response after restoration of voltage.

30

(31)

xxx.yyy.IN_Central_ON_OFF Central ON/OFF 1 bit Input xxx.yyy.IN_Switch[0] ON/OFF, Channel 0 1 bit Input xxx.yyy.IN_Switch[1] ON/OFF, Channel 1 1 bit Input xxx.yyy.IN_Switch[2] ON/OFF, Channel 2 1 bit Input xxx.yyy.IN_Switch[3] ON/OFF, Channel 3 1 bit Input xxx.yyy.OUT_Feedback[0] Return message,

1 bit Output

xxx.yyy.OUT_Feedback[1] Return message,

1 bit Output

Note:

• The KNX_Applications_2xx.lib library provides a visualization object for the configuration of this function block with the name Switch_actuator_visu (see Section "Visual Display Elements").

• The variable at input "typSA_4“ contains all the parameter data required for configuration of the switching actuator. This variable should be saved as VAR RETAIN PERSISTENT. Otherwise, the data will be lost after a reset or program download.

(32)

Switch Actuator, 8-Channel (FbSwitch_actuator_8)

WAGO-I/O PRO CAA Library Elements

typSA_8 typSA_8 Variable with parameter data Illustration:

See function block description Switch Actuator, 4-Channel (FbSwitch_actuator_4).

The only difference with this actuator is the number of switching channels (8 vs. 4).

32

(33)

Switch Actuator, 12-Channel (FbSwitch_actuator_12)

WAGO-I/O PRO CAA Library Elements

(34)

Switch Actuator, 16-Channel (FbSwitch_actuator_16)

WAGO-I/O PRO CAA Library Elements

34

(35)

Dim Signal Evaluation (FbDimmSignal)

Conversion

Dim Signal Evaluation (FbDimmSignal)

WAGO-I/O PRO CAA Library Elements

Name: FbDimmSignal

Applicable to: 750-841, 750-849, 750-830, 758-870, 750-819, 750-833 und 750-842)

Libraries used: KNX_Standard_1xx.lib SysLibGetAddress.lib mod_com.lib

typKNX typKNX KNX transmit and receive data (internal) See FbKNX_Master_646 for description Output parameters: Data type: Comment:

xDimmUp BOOL Power on and step up brightness xDimmDown BOOL Power off and step down brightness Illustration:

(36)

Dim Signal Evaluation (FbDimmSignal)

The function block FbDimmSignal converts received KNX dim telegrams in binary output signals. The output signals can be connected for example with the inputs of the dim function blocks from the DALI_02.lib library. The behavior to the

"xDimmUp“ and "xDimmDown“ outputs corresponds to the operation concept of short / long button actuation. A 1-bit switching telegram is sent if the button of the KNX sensor is pushed briefly. This switching telegram creates a short pulse at the

"xDimmUp" or "xDimmDown" output. The power-on command is transmitted at output "xDimmUp“ and the power-off command at output "xDimmDown".

A 4-bit dim telegram is sent by pushing the button longer. The output "xDimmUp" or

"xDimmDown" is activated depending on the dim direction, A stop telegram of 4-bit dim object is sent by releasing the button. As a result, the activated output will be reset.

Note:

The function block can only be used for KNX sensors that use the "Dimming with stop telegram“ function.

36

(37)

Configuration of Binary Input (BinaryInput_switch_visu)

Visual Display Elements

Configuration of Binary Input (BinaryInput_switch_visu)

WAGO-I/O PRO CAA Library Elements

Category: Building Services Name: BinaryInput_switch_visu Name of library: KNX_Applications_2xx.lib Applicable to: KNX Controller 750-849 or

KNX Module 753-646

Wildcard: Data type: Comment:

FbBinaryInput_switch Instance from FbBinaryInput_

Switch_4

Link between the instance from FbBinaryinput_Switch_4 and the configuration interface

Illustration:

11) 10)

9) 7) 8)

6)

5)

4) 3)

2) 1)

(38)

Configuration of Binary Input (BinaryInput_switch_visu)

The "BinaryInput_switch_visu" template supports the configuration of the four-point binary input by the switch application.

This template offers the following control and indicating options:

1) Selection of the input channel 2) Designation of the input channel 3) Indication of the start of the function 4) Selection of function type

5) Parameter value for the cyclic transmitting interval of the object value. Cyclic transmitting is not performed when value T#0s is specified. The minimum cycle time is limited to 600 ms to prevent overloading of the bus.

6) Indication of whether the binary input is closed or open

7) Indication of, and changeover between, Manual/Automatic operation 8) Manual defining of input signal

9) Graphical indication of operating mode, or slope evaluation

10) Reset parameters to standard (default) values. The key must be pressed for more than two seconds, which allows the standard values to be written.

11) The parameter values are written and saved when the “Write” key is pressed.

38

(39)

Configuration of Dimming Actuator (Dimm_actuator_visu)

Configuration of Dimming Actuator (Dimm_actuator_visu)

WAGO-I/O PRO CAA Library Elements

Category: Building Services Name: Dimm_actuator_visu Name of library: KNX_Applications_2xx.lib Applicable to: KNX Controller 750-849 or

KNX Module 753-646

FbDimm_actuator Instance from FbDimm_

actuator_x

Link between the instance from FbDimm_actuator_x and the configuration interface Illustration:

12) 11)

8) 5) 4)

14) 13)

7)

6)

10)

9)

3) 2)

1)

(40)

Configuration of Dimming Actuator (Dimm_actuator_visu)

The "Dimm_actuator_visu" template supports the configuration of the 4- to 16- channel dimming actuators.

1) Selection of dimming channel 2) Designation of dimming channel

3) Input field for assigning parameters for the dimming time

4) Input field for assigning parameters for the dimm level at power-on. This value is taken into consideration only when the memory function has been deactivated in field 12), the Memory Function field.

5) Input field for assigning parameters for minimum dimming values 6) Input field for assigning parameters for maximum dimming values 7) Indication for reset response of dimming channel

8) Selection of reset response for dimming channel

RETAIN_MODE_KNX = After a reset, the dimming channel has the same status as it did prior to reset.

ON_MODE_KNX = The dimming channel is activated after reset.

OFF_MODE_KNX = The dimming channel is deactivated after reset.

9) Indicator field for dimming value and switching status 10) Control of dimming channel via visualization

11) Select whether dimming channel should react to central function.

12) When switching off the lighting, select whether the last set dimming value is to be saved and utilized when the lighting is switched back on.

40

(41)

Configuration of Sunblind Actuator (Sunblind_actuator_visu)

Configuration of Sunblind Actuator (Sunblind_actuator_visu)

WAGO-I/O PRO CAA Library Elements

Category: Building Services Name: Sunblind_actuator_visu Name of library: KNX_Applications_2xx.lib Applicable to: KNX Controller 750-849 or

KNX Module 753-646

FbSunblind_actuator Instance from FbSunblind_

actuator _x

Link between the instance from FbSunblind_actuator_x and the configuration interface

Illustration:

13) 12) 7)

11)

6)

5) 4)

14) 15)

8)

10) 9)

3) 2)

1)

(42)

Configuration of Sunblind Actuator (Sunblind_actuator_visu)

The "Sunblind_actuator_visu" template supports the configuration of the 4- to 16- channel sunblind actuators.

1) Selection of the sunblind channel 2) Designation of the sunblind channel

3) Input field for assigning parameters for the sunblind run time

4) Input field for setting the sunblind time parameters (the brief time required to depress the key).

5) Input field that assigns parameters for the switching time of direction changes.

6) Indicate if sunblind channel should react to control command from sun protection function.

7) Activation of lamella adjustment upon completion of the run command for sun protection

8) Assign the compass direction that the sun protection feature should take.

9) Indication field for switching status and sunblind position 10) Control of sunblind channel via visualization

11) Select whether sunblind channel should react to central function.

12) Input field for assigning parameters for sun protection position run time.

13) Input field for assigning parameters for lamella adjustment time after reaching the sun protection position.

Note:

Control for the sun protection position is structured as follows:

1. Sunblind moves UP for the defined run time (motor running time) 2. Pauses when changing direction

3. Sunblind moves DOWN for the defined run time (move time sun position).

4. Pauses when changing direction

5. The lamellae then tilts for the defined time (move time lamella).

42

(43)

Configuration of Switching Factor (Switch_actuator_visu)

Configuration of Switching Factor (Switch_actuator_visu)

WAGO-I/O PRO CAA Library Elements

Category: Building Services Name: Switch_actuator_visu Name of library: KNX_Applications_2xx.lib Applicable to: KNX Controller 750-849 or

KNX Module 753-646

FbSwitch_actuator Instance from FbSwitch_

actuator_x

Link between the instance from FbSwitch_actuator_x and the configuration interface Illustration:

10) 7)

6)

14) 13)

9)

8)

12)

11)

5)

4) 3)

2) 1)

(44)

The "Switch_actuator_visu" template supports the configuration of the 4- to 16- channel switching actuators. Some elements in the visualization template are hidden/displayed, depending on the selected type of function.

1) Selection of the switching channel 2) Designation of the switching channel 3) Indication of the start of the function 4) Selection of function type

5) Selection of whether switching channel should react to central function.

6) For the function type "Stairwell lighting", select whether stairwell lighting is retriggered when the button is pressed again.

7) For the function type "Stairwell lighting", select whether a pre-alarm will be issued before the stairwell lighting cycle expires. This option can only be activated when the stairwell lighting period is longer than 20 seconds. The pre-alarm is issued by the switching channel, which has been deactivated for a brief period of time (10 seconds prior to expiration of the set time).

8) Input field for assigning parameters for the delay times.

9) Indication of reset response for switching channel 10) Selection of reset response of switching channel

RETAIN_MODE_KNX = After a reset, the switching channel has the same status it did prior to reset.

ON_MODE_KNX = The switching channel is activated after reset.

OFF_MODE_KNX = The switching channel is deactivated after reset.

11) Indication of switching status

12) Control of switching channel via visualization

44

(45)

(46)

WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Hansastraße 27 • D-32423 Minden Phone: 05 71/8 87 – 0

Fax: 05 71/8 87 – 1 69 E-mail: [email protected] Internet: http://www.wago.com