• Aucun résultat trouvé

This scheme uses the public filehandle and multi-component lookup [RFC2054, RFC2055] to access server data with a minimum of protocol overhead

N/A
N/A
Protected

Academic year: 2022

Partager "This scheme uses the public filehandle and multi-component lookup [RFC2054, RFC2055] to access server data with a minimum of protocol overhead"

Copied!
11
0
0

Texte intégral

Références

Documents relatifs

A variable such that the initial portion of its name is the concatenation of the name for a ProNET type network interface followed by the octet string represented symbolically

example, when a router of the NSFNET Backbone exchanges routing or reachability information with a gateway of a regional network EGP is

This model requires that just before the application begins a large bulk transfer of data, a request message is sent to the switch asking that the switched network connection

o Some DUAs are better than others at finding the required results o Some DUAs will get the required results more quickly than most o DUA designers have to build DUAs in

Section 3 of RFC 1009, "Constituent Network Interfaces" [8], briefly discusses requirements for transmission of IP datagrams over a number of types of point-to-point

Note that, although servers are required to return responses whenever such responses are defined in the protocol, there is no requirement for synchronous behaviour on the part

These commands are documented here for the benefit of implementors who may wish to support them for compatibility with old client implementations.. The section headings of

The EXPIRE capability, with a parameter other than 0 or NEVER, is intended to let the client know that the server does permit mail to be left on the server, and to