• Aucun résultat trouvé

Foreword

N/A
N/A
Protected

Academic year: 2022

Partager "Foreword"

Copied!
6
0
0

Texte intégral

(1)

Proceedings of the 26 th International Workshop on Principles of Diagnosis (DX-15)

August 31-September 3, 2015 Paris, France

Yannick Pencol´e, Louise Trav´e-Massuy`es, Philippe Dague, Editors

(2)
(3)

Foreword

The International Workshop on Principles of Diagnosis is an annual event that started in 1989, originating in the Artificial Intelligence community. Its focus is on theories, principles and compu- tational techniques for diagnosis, monitoring, testing, reconfiguration and repair of complex systems and applications of these techniques to real world problems.

This year, DX-15 received 41 submissions (39 full papers and 2 tool papers) from 15 countries, from 5 continents. Each paper was thoroughly peer reviewed by three reviewers. We accepted 17 regular papers (selection rate 43.6%), 18 posters and 2 benchmark/tool papers. We wish to thank all the authors of submitted papers, the program committee members for the time and effort spent, the invited speakers for their participation.

As the DX-15 workshop is co-located with the IFAC International Symposium SAFEPROCESS 2015, its organization would not have been possible without the full support of the SAFEPROCESS organization team and especially Vincent Cocquempot who did a tremendous coordination job be- tween the two events. Also special thanks to our local contact Nazih Mechbal at Ecole Nationale´ Sup´erieure d’Arts et M´etiers (ENSAM), ParisTech, where DX-15 and SAFEPROCESS take place.

Thanks also to the local organization team at LAAS-CNRS and at the CNRS administrative depart- ment of Toulouse (DR14) for their full technical and administrative support.

We also wish to thank our sponsors: Centre National de la Recherche Scientifique (CNRS),Uni- versit´e de Toulouse),Laboratoire de Recherche en Informatique,Universit´e Paris-Sud,Ecole Nationale´ Sup´erieure d’Arts et M´etiers (ENSAM),Institut National des Sciences Appliqu´ees de Toulouse(INSA- Toulouse), Universit´e Pierre et Marie Curie (UMPC), and ACTIA.

Yannick Pencol´e, Louise Trav´e-Massuy`es, Philippe Dague.

August 2015

Word cloud generated from the titles of the DX-15 papers byhttp://www.wordle.net.

i

(4)
(5)

Workshop Organization

Program Co-Chairs

Yannick Pencol´e LAAS-CNRS, Univ. F´ed´erale Toulouse, France Louise Trav´e-Massuy`es LAAS-CNRS, Univ. F´ed´erale Toulouse, France Philippe Dague LRI, Universit´e Paris-Sud, France

International Program Committee

Rui Abreu PARC, USA

Jose Aguilar Universidad de los Andes, Venezuela Carlos Alonso Universidad de Valladolid, Spain Gautam Biswas Vanderbilt University, USA Anibal Bregon Universidad de Valladolid, Spain Luca Console Universit`a di Torino, Italy

Matthew Daigle NASA Ames Research Center, USA Johan de Kleer PARC, USA

Michael Hofbaur Joanneum Research, Austria Alexander Feldman PARC, USA

Gerhard Friedrich Klagenfurt University, Austria Alban Grastien NICTA, Australia

Claudia Isaza University of Antioquia, Medell´ın, Colombia Meir Kalech Ben-Gurion University of the Negev, Israel Mattias Krysander Link¨oping University, Sweden

Anastassia

K¨ustenmacher Bonn-Rhein-Sieg University of Applied Science, Germany Ingo Pill TU Graz, Austria

Gregory Provan University College Cork, Ireland Xavier Pucel ONERA CERT, France

Martin Sachenbacher LION Smart GmbH, Germany

Ramon Sarrate Universitat Polit`ecnica de Catalunya, Spain Neal Snooke Aberystwyth University, UK

Gerald Steinbauer TU Graz, Austria Peter Struss TU M¨unchen, Germany

Anna Sztyber The Institute of Automatic and Robotics, Warsow University of Technology Gianluca Torta Universit`a di Torino, Italy

Franz Wotawa TU Graz, Austria

Marina Zanella Universit`a degli Studi di Brescia, Italy

iii

(6)

Additional Reviewers

Moussa Maiga LAAS-CNRS, Univ. F´ed´erale Toulouse, France Nathalie Barbosa Roa LAAS-CNRS, Univ. F´ed´erale Toulouse, France

Euriell Le Corronc LAAS-CNRS, Universit´e Paul Sabatier, Univ. F´ed´erale Toulouse, France Elodie Chanthery´ LAAS-CNRS, INSA Toulouse, Univ. F´ed´erale Toulouse, France

Indranil Roychoudhury SGT Inc, NASA Ames Research Center, USA

Workshop Organizing Committee

Yannick Pencol´e LAAS-CNRS, Univ. F´ed´erale Toulouse, France Louise Trav´e-Massuy`es LAAS-CNRS, Univ. F´ed´erale Toulouse, France Vincent Cocquempot CRISTAL, Universit´e Lille 1, France

Audine Subias LAAS-CNRS, INSA Toulouse, Univ. F´ed´erale Toulouse, France Nazih Mechbal ENSAM Paris, France

Technical and Administrative Support

Christ`ele Mouclier LAAS-CNRS, Toulouse, France R´egine Duran LAAS-CNRS, Toulouse, France Dominique Daurat LAAS-CNRS, Toulouse, France Fabienne Baduel LAAS-CNRS, Toulouse, France Bruno Birac LAAS-CNRS, Toulouse, France

St´ephanie Saluden D´el´egation R´egionale CNRS, Toulouse, France R´egine Barthes D´el´egation R´egionale CNRS, Toulouse, France

Références

Documents relatifs

d’expériences avec des CDD, démontrent qu’il nous faut au minimum 1.5 personnes sur la zone pour répondre aux besoins essentiels et 2 personnes pour permettre à cette zone

Lucie Séveno achève sa formation ingénieur dans quelques mois après avoir participé à de nombreux travaux dans la zone lithographie laser : nouveaux procédés pour la Dilase

L'ensemble des activités de la zone est en interaction très forte avec les zones de photolithographie, gravure plasma et caractérisation (salle blanche et optique) ainsi qu'avec

Fours Centrotherm , Tempress, REVE à basse pression atmosphérique (LPCVD) 1) Allumer le scrubber. 2) Ouvrir toutes les lignes de gaz. 3) Démarrer les pompes au sous-sol. 4)

présentation transversale (interzone) des technologies disponibles au sein de la plateforme. A l'issue de cette phase chacun devrait avoir une idée générale des techniques et procédés

Valider lors de l'ouverture de la première fenêtre puis confirmer lors de l'ouverture de la fenêtre suivante ( Figure 13 ). Validation

L’écriture de motifs par lithographie laser s’effectue à partir d’un ou plusieurs fichiers de données au format gds.. Les logiciels que nous utilisons pour

Dans la plupart des travaux, les contributions concernent la prise en compte de mod` eles d’incertitudes, existant au sein de m´ ethodes de r´ esolution qui ne prenaient auparavant