• Aucun résultat trouvé

NDT Characterization of FeCu Nanostructured Younes Abderrahmane

N/A
N/A
Info
Télécharger
Protected

Academic year: 2021

Partager "NDT Characterization of FeCu Nanostructured Younes Abderrahmane"

Copied!
1
0
0

Chargement.... (Voir le texte intégral maintenant)

Texte intégral

(1)

NDT Characterization of FeCu Nanostructured

Younes Abderrahmane

1-2

, Dilmi Nacer

2

, KHORCHEF Mohammed

1

, Bouamer Amirouche

1-3

1

Welding and NDT researcher center

2

Laboratory of surface treatment and Materials, University of Saad Dahleb Blida, Algeria

3

Laboratoire de diélectrique, faculté de physique, USTHB

Résumé

The mechanical alloying process has been used to synthesis Fe-Cu nanostructured powder in a high energy planetary ball-mill PM400. Structural and magnetic, properties of the powders milled were investigated by scanning X-ray diffraction and vibrating sample magnetometer, respectively, the elemental micrometer-sized Cu and Fe powders were first mixed in Fe70Cu30

compositions, the added of Cu in Fe formed the solid solutions of Cu in Fe and Fe in Cu, a solid solution face-centred cubic and solid solution body-centred cubic nanograined composite has been formed

Keywords: Mechanical alloying, Fe–Cu alloy, Structural and magnetic.

Références

Télécharger maintenant ( PDF - 1 Page - 124.85 KB )

Documents relatifs

Magnetic properties of the unconventional superconductors epsilon-Fe, FeSe and Ca2CuO2Cl2 investigated by x-ray and neutron scattering

Our results show the power of Cu L 3 -edge RIXS to study spin excitations in the cuprates, since similar measurements using inelastic neutron scattering would be nigh impossible due

Magnetic and structural Behavior of Fe-CoONanocompositesMechanically Milled

Abstract: The Fe60(CoO)40 nanostructured alloys have been prepared from pure iron and cobaltoxide powders by mechanical alloying technique within a high energy

NDT Characterization of FeCu Nanostructured

Structural and magnetic, properties of the powders milled were investigated by scanning X-ray diffraction and vibrating sample magnetometer, respectively, the elemental

Microstructural and magnetic characterization ofCu-Ni nanocrystalline powders.

Morphological, structural, microstructural and magnetic properties of the ball milled powders were characterized by scanning electron microscopy, X-ray diffraction and vibrating

Microstructural and magnetic characterization of Cu-Ni nanocrystalline powders

Morphological, structural, microstructural and magnetic properties of the ball milled powders were characterized by scanning electron microscopy, X-ray diffraction

NDT CHARACTERIZATION OF NANOCOMPOSITE Younes Abderrahmane 1, Dilmi Nacer

The nanocrystalline coatings may show increased hardness, good mechanical strength [1], good corrosion resistance and the oxidation resistance, and / or good behavior to friction and

Structural study of Be43HfxZr57-x metallic glasses by X-ray and neutron diffraction

dination. The Bhatia-Thornton partial structure factors are then deduced. From the partial radial distribution functions the partial coordination numbers are calculated

Nanomaterial identification of powders: comparing volume specific surface area, X-ray diffraction and scanning electron microscopy methods

In particular, the proposed data treatment involves a precise analysis of the gas adsorption isotherms to calculate the external specific surface area for the