Introduction IS-IS uses a 1-8 byte system ID (normally 6 bytes) to represent a node in the network

If the server supports option negotiation, and it recognizes one or more of the options specified in the request packet, the server may respond with an Options

In the event other encodings are defined in the future, and the mail reader does not support the encoding used, it may either (a) display the ’encoded-word’ as ordinary text,

Allowing ReceiveLSPBUfferSize to become a configurable parameter rather than an architectural constant must be done with care: if any system in the network does not support

In addition, in the case of a planned restart prior to restarting, the restarting node SHOULD originate the IS-IS Link State Protocol data units for TE links with 0 as

The User Control and Communication Module (UCC) implements protocol sufficient for a process to communicate with a foreign HOST’s logger and to make initial

A Policy Control Mechanism in IS-IS Using Administrative Tags Status of This Memo.. This document specifies an Internet standards track protocol for the Internet community,

A third way to build dynamic mappings would be to use the transport mechanism of the routing protocol itself to advertise symbolic names in IS-IS link-state PDUs.. This

The "IPv6 Reachability" TLV describes network reachability through the specification of a routing prefix, metric information, a bit to indicate if the prefix is