Flare Test, an application on the welded steeltubes, study with simulation

In the Eastern Mediterranean Region, in response to the growing public concern related to EMF in the mid 1990s, particularly among countries of the Gulf Cooperation Council (GCC) and

Measurement of sand transport with a submerged pump: presentation of the results of a test campaign carried out on the Isère River in July 2019... 1

Consequently, isothermal tests including dwell time were performed on base metal specimens to validate model reliability in predicting mechanical response to such conditions at

The paper presents an overview of modern methods of digital image processing and image recognition methods, implemented algorithmic and software, presents the results of

Bayesian estimation was carried out for the signals obtained from the located events of the resonance fatigue test.. The 95% credible intervals of the estimated means from the

Abstract : In this study, the experimental results are present the evolution of mechanical properties according to some aggressive environments with a coating of

On the other hand, the study of the influence of welding conditions on toughness of welded joint steel Stainless steels, showed that the solder joint is obtained austenitic

*Increased pressure values of flare depending on thickness of the tube for different tensile strengths and for both tube (draft and final) (see Figs. 5 and 6); This