• Aucun résultat trouvé

Mechanical properties and characterization ofmetallic bond coat used in hardfacing ofpetroleum drill bits

N/A
N/A
Protected

Academic year: 2021

Partager "Mechanical properties and characterization ofmetallic bond coat used in hardfacing ofpetroleum drill bits"

Copied!
1
0
0

Texte intégral

(1)

3rd International Conference on Competitive Materials and Technology Processes 2014

Mechanical properties and characterization of metallic bond coat used in hardfacing of

petroleum drill bits

Youcef YAHMI, Djamel Miroud, Bouzid MAAMACHE, Ridha BADI

Abstract : Tungsten carbides are widely used as weld hardfacing deposits in petroleum drill bits. To assure proper bonding of the hardfacing to the substrate, several choices of bond coating layers are offered. In this study, tow different commercial powders A and B and mixtures of both them were thermal sprayed onto a carbon steel XC18 substrate used in petroleum drill bits. The micro hardness respectively, of the hardfacing surface and bond coating layers was measured. The microstructure was observed by optical microscopy and field emission scanning electron microscope equipped with energy-dispersive X-ray spectrometry. It has been observed that the mixture of 75% of A and 25% of B produces an uniform coating metallurgically bonded to the substrate with a little heat affected zone and a little amount of porosity.

Keywords : Thermal spray coating, drill bit, Bond coat layer, weld hardfacing, adhesion.

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Documents relatifs

Dark Market provides an introduction to the topic and gives an overview of different asset pricing models in OTC markets characterized by symmetric and asymmetric informationS.

The Lie algebra of interest in our context is the infinite dimensional Lie algebra of pseudo-differential operators (P.D.Os) acting on sections of some finite rank vector bundle E

The cell viability in the coated nano-TiO 2 (Vive Nano.. Titania) treatment group was unchanged at 10 mg/L, with a small effect at 100 mg/L; even higher concentrations up to 400

Mechanical properties and characterization of metallic bond coat used in hardfacing of petroleum drill bitsY. Badi 1

• Then, two validation cases of the sectional soot model coupled with detailed chemistry turbu- lent combustion models are presented with 3-D RANS simulations compared to

Even though it gives birth to higher energy pump consumption by means of high viscosity during and after phase change, special pumps can be used and the loss can

In section 3 we introduce a new mathematical tool: the global orbit pattern, in order to describe more precisely the behaviour of dynamical systems on finite sets.. In section 4 we

ﻊﻣ ﺎﻨﻣاﺰﺗ يأ ﲔﻜﻠﻬﺘﺴﳌا ﲔﺑ ﺎﻣو ﲔﻜﻠﻬﺘﺴﳌا و تﺎﺴﺳﺆﳌا ﲔﺑ ﺎﻣو ﺎﻼﻴﺜﻣ و تﺎﺴﺳﺆﳌا ﲔﺑ ﺎﻣ ﺖﻧﱰﻧﻻا ماﺪﺨﺘﺳا ﻢﻬﺴﻔﻧأ. ﻰﺋاﺮﺟﻻا ﻒﻳﺮﻌﺘﻟا : ﻦﻋ ىا، ﺎﻴﻧوﱰﻜﻟا