• Aucun résultat trouvé

The influence of cerium ion concentrations on the characteristics of hybrid films obtained on AA2024-T3 aluminum alloy

N/A
N/A
Protected

Academic year: 2021

Partager "The influence of cerium ion concentrations on the characteristics of hybrid films obtained on AA2024-T3 aluminum alloy"

Copied!
11
0
0

Texte intégral

(1)

HAL Id: hal-00862238

https://hal.archives-ouvertes.fr/hal-00862238

Submitted on 16 Sep 2013

HAL is a multi-disciplinary open access archive for the deposit and dissemination of sci-entific research documents, whether they are pub-lished or not. The documents may come from teaching and research institutions in France or abroad, or from public or private research centers.

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des établissements d’enseignement et de recherche français ou étrangers, des laboratoires publics ou privés.

The influence of cerium ion concentrations on the

characteristics of hybrid films obtained on AA2024-T3

aluminum alloy

Celia F. Malfatti, T. L. Menezes, Claudio Radtke, Julien Esteban, Florence

Ansart, Jean-Pierre Bonino

To cite this version:

Celia F. Malfatti, T. L. Menezes, Claudio Radtke, Julien Esteban, Florence Ansart, et al.. The influence of cerium ion concentrations on the characteristics of hybrid films obtained on AA2024-T3 aluminum alloy. Materials and Corrosion / Werkstoffe und Korrosion, Wiley-VCH Verlag, 2012, vol. 63, pp. 819-827. �10.1002/maco.201106070�. �hal-00862238�

(2)

Open Archive TOULOUSE Archive Ouverte (OATAO)

OATAO is an open access repository that collects the work of Toulouse researchers and makes it freely available over the web where possible.

This is an author-deposited version published in : http://oatao.univ-toulouse.fr/

Eprints ID : 8703

To link to this article : DOI:10.1002/maco.201106070

URL : http://dx.doi.org/10.1002/maco.201106070

To cite this version : Malfatti, Celia F. and Menezes, T. L. and Radtke,

Claudio and Esteban, Julien and Ansart, Florence and Bonino, Jean-Pierre. The influence of cerium ion concentrations on the

characteristics of hybrid films obtained on AA2024-T3 aluminum alloy. (2012). Materials and Corrosion / Werkstoffe und Korrosion, vol.

63 (n° 9). pp. 819-827. ISSN 0947-5117

Any correspondance concerning this service should be sent to the repository administrator: staff-oatao@listes-diff.inp-toulouse.fr

(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)

Références

Documents relatifs

In contrast, at a lower thermal load (N = 2000 rpm), increasing the LF-VAD amplitude resulted in a higher impact velocity and larger uncut chip thickness (see Section 3).. Effect

Pour utiliser un ou des fichiers tout au long d'un programme ou dans une procédure, il faudra l'identifier par une variable dont le type est fonction de l'utilisation que l'on

2010.. 104 لوأ : رئازجلا يف يعارزلا يعاطقلا شاعنل ةجهتنملا ةسايسلا و يحلفلا رامثتسلاو ليومتلا ... عجارملا ةمئاق 142.. :لولا لصفلا يف تاقورحملا عاطق

Table 1 shows the results of mean strain values (msv), particle size, chemical composition, magnetic properties of alloyed powders, and some mechanical properties

It is presented an experimental study on micro milling aluminum alloy with different width of cut in order to identity the influence of the minimum chip thickness on the

L’objectif de cette étude est d’explorer des axes d’améliorations d’un modèle hydrologique « traditionnel » à base physique en intégrant tour à tour trois modules adaptés

Biocontrol and plant growth promoting properties of Streptomyces mutabilis strain IA1 isolated from a Saharan soil on wheat seedlings and visualization of its niches of

animal model, the predictive value of uEGF in a large type 2 diabetic human cohort. They observed  that  uEGF/urinary  creatinine  (Cr)  was  weakly  associated