• Aucun résultat trouvé

Improvement of surface finish by ballburnishing:approach by fractal dimension

N/A
N/A
Protected

Academic year: 2021

Partager "Improvement of surface finish by ballburnishing:approach by fractal dimension"

Copied!
1
0
0

Texte intégral

(1)

Surface Engineering

Volume 34, Issue 1, 2016, Pages 1-8

Improvement of surface finish by ball burnishing:approach by fractal dimension

M. BOUREBIA, L. Laouar, H. Hamadache & S. Dominiak

Abstract: The surface roughness significantly affects the quality of parts and their functional properties suchas contact surface, as well as coating adhesion. The machined surface quality is evaluated byarithmetic deviation Ra which does not suffice to describe the surface irregularities. In order toapprehend these deficiencies a new technique based on fractal geometry was introduced.

Toapply this concept an experimental work was carried out to characterise surface quality byfractal dimension ‘D’. The operations of burnishing ball were performed according to plans ofexperiments of ‘Box–Behnken’, an optimal regime was obtained and a mathematical model wascleared for predicting the fractal dimension ‘D’ as a function of treatment regime parameters.Furthermore, the application of optimal regime under several passes ‘i’ has enabled to examinethe evolution of ‘D’. The results confirm that fractal dimension ‘D’ has impact on surface qualityand tribological parameters.

Keywords : roughness, fractal dimension, Burnishing process, Designs of experiments

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Documents relatifs

Comparison of melt pool dimensions for walls manufactured either in contin- uous or pulsed regimes at similar mean power (P mean = P peak × dc): no clear difference is shown between

These treatments were applied on forged XC38 steel samples, the obtained results have resulted in a mathematical model evaluating the surface hardness "Hv" as a function

The curve illustrating (figure 9) the evolution of surface hardness "Hv" as a function of heat treatment parameters (T, t) shows significant effect of holding time where

Experimental and simulation results have enabled to show than the large diameter ball under low loads and medium feed speeds, favors the elimination of peaks and reduction of

Cette étude nous montre que la Dimedone et l’ortho-phénylènediamine deux produits commerciaux et bon marché, réagissent pour donner l’intermédiaire

Les satellites galil´eens : Io, Europe, Ganym`ede et Callisto, sont les quatre plus grandes lunes du syst`eme Jovien.. Elles ont ´et´e d´ecouvertes en 1610 par Galileo Galilei,

While neural network and time series based methods remain the most commonly used and the most studied models for wind speed and wind energy short term forecasting, many other

In particular, using the same approach as Tsunogai of replacing the higher genus mapping class groups with their higher genus braid subgroups, Enriquez in [En] was able to extend