• Aucun résultat trouvé

Texture, misorientation and mechanicalanisotropy in a deformed dual phase stainlesssteel weld joint

N/A
N/A
Info
Télécharger
Protected

Academic year: 2021

Partager "Texture, misorientation and mechanicalanisotropy in a deformed dual phase stainlesssteel weld joint"

Copied!
1
0
0

Chargement.... (Voir le texte intégral maintenant)

Texte intégral

(1)

Materials Science and Engineering: A

Volume 575, 2013, Pages 94-103

Texture, misorientation and mechanical anisotropy in a deformed dual phase stainless

steel weld joint

Riad BADJI, T. Chauveau, B. BACROIX

Abstract: The deformation behavior of a duplex stainless steel weld joint is studied. A detailed texture analysis shows that the increase of the deformation percentage leads to a reinforcement of all possible {hkl}?111?and {hkl}?100? components in austenite, and of the {hkl} ?110? components in ferrite for both the base metal (BM) and the heat affected zone (HAZ). In the weld metal (WM), a strong scatter of the crystallographic orientation relationship (OR) initially found in the solidification microstructure is recorded after deformation. The analysis of the Kernel Average Misorientation (KAM) distribution shows that the deformation is more concentrated in the base metal than in the other parts of the weld joint. The final mechanical behavior studied through microhardness measurement and micromechanical calculations, allows us to separate the contribution of both microstructural and textural evolution to the overall strain hardening of the weld joint.

Keywords : duplex stainless steel, deformation texture, mechanical anisotropy, TIG welding

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Télécharger maintenant ( PDF - 1 Page - 7.72 KB )

Documents relatifs

Effect of microstructure and precipitationphenomena on the mechanical behavior ofAA6061-T6 aluminum alloy weld.

Abstract: In the present study, the effect of microstructure and precipitation phenomena on the micro hardness, tensile strength, impacttoughness, and electrochemical behavior

Study of the Microstructural and Mechanical Properties of a Phosphocalcic Bone Substitute

In this study, the mechanical and microstructural properties of the synthetic hydroxyapatite, with Ca/p stoichiometry equal to 1.67, were determined as a function of

(2)Nous avons de la peine à le croire et pourtant c'est la vérité

nier, celui qu'elle avait gardé pour la fin, celui qu'elle jugeait le plus important. Il était délicat. Si elle osa le for¬. muler en fin de compte, elle ne le fit qu'en

Thrombose veineuse secondaire au Néphroblastome ( à propos de 8 cas colliges a l’hôpital d'enfant de Rabat)

Kim a récapitule son expérience avec 226 cas de cancer du rein avec thrombus tumoral et a signalé que la récidive était plus fréquente chez les patients

Modification de l’énergie de surface du bois par fluoration

Pour ce faire, un traitement par fluoration, visant à réduire l’affinité du bois pour l’eau, a été mis en œuvre sur les deux essences les plus exploitées dans la

THE MECHANICAL THRESHOLD OF DYNAMICALLY DEFORMED COPPER AND NITRONIC 40

The first is that for copper the increased rate sensitivity found on a constant strain comparison of flow stress data is accompanied by an identical increase in the mechanical

Solidification and phase transformations in a dissimilar steel weld 18MND5/309L/308L : evolution of microstructure and mechanical properties

Eventually comparison between simulations and strain measurements led to choose a yield point at 250 MPa for the decarburized layer and to introduce an intermediate layer before

Characterization and modeling of microstructural evolutions during the thermal treatment of cold-rolled Dual-Phase steels

Based on individual modeling of both recrystallization kinetics and phase transformation kinetics, expected microstructural evolutions were located as a function of temperature