Simulation of Orowan's mechanism using dislocation dynamics based on the non-singular elastic theory

The total resistance required to prevent condensation can be calculated by dividing the vapour pressure drop from the warm side to point A by the rate of flow from point A to the

To evaluate the therapeutic effect of norbixin, we used the BLD model described above and Abca4 -/- Rdh8 -/- mice were injected in one eye 24 hours before BLD.. In a first set

Le théo- rème 1 de [5] est notre présent théorème 1, le théorème 2 de [5] est notre théo- rème 2 réduit aux nombres premiers usuels, et le théorème 3 de [5] est notre

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

Grain size dependence of the relaxation of intrinsic compressive stress (a) and the hardening behavior due to thermal stress (b) in films with various source densities. The amount

Therefore, the unified dislocation damping theory associated with the point defect dragging developed by Ogurtani /14/ is strictly valid in the calculation of the displacement

In this case some portion of the electrons from the dangling bands will transfer to the acceptor levels formed by these local defects, and the holes appear i n the

In the following we give an example of K, = (1072) deformation twin in Zr and a K, = (1 122) deformation twin in Ti with a preliminary analysis of the dislocation arrays