Radiation Technology in Emerging Industrial Applications | IAEA

Two radiation detectors are needed for simple radiotracer experiments, such as measurement of the residence time distribution (RTD) of the radiotracer inside a reactor

Pilot and industrial scale installations have demonstrated that radiation processing based technologies for flue gas treatment (SO x and NO x removal), wastewater purification

Guidance on meeting the requirements of the Basic Safety Standards for occupational protection is provided in three interrelated Safety Guides, one giving general guidance on

[1] FOOD AND AGRICULTURE ORGANIZATION OF THE UNITED NATIONS, INTERNATIONAL ATOMIC ENERGY AGENCY, INTERNATIONAL LABOUR ORGANISATION, OECD NUCLEAR ENERGY AGENCY, PAN AMERICAN

Electrons originating in the electron gun are accelerated in the acceler- ating waveguide to the desired kinetic energy and then brought, in the form of a pencil beam, through the

Our objective of this paper focuses on the chemical modification of pore inner surfaces in PET ion track membranes since the well-controlled properties of pore inner sufaces should

The following equations can be used to calculate good mixing length, in terms of length to diameter (L/D) ratio (or equivalently in the number of pipe diameters), as a function of

Presently, processing of materials using high energy electron accelerators (200 keV to 10 MeV) constitutes the largest commercial radiation application. World over, there are