• Aucun résultat trouvé

Automatic IPv4 to IPv6 Transition D1.1 - Network Topologies and Transition Procedures

N/A
N/A
Protected

Academic year: 2021

Partager "Automatic IPv4 to IPv6 Transition D1.1 - Network Topologies and Transition Procedures"

Copied!
24
0
0

Texte intégral

Figure

Figure 3.2: Network with a DMZ
Figure 3.3: Network with a Loop
Figure 3.5: Network with Dierent IPv4 and IPv6 Border Routers

Références

Documents relatifs

Dual Stack Application Layer Gateways (ALG46s) can be used to solve h4 to h6 Interworking.

The rapid growth of the STOEMP network, originating from the cooperation of two different departments and nowadays including more than 20 organizations, has been partly attributed

These authors demonstrate that food abundance has provided HGs an incentive to shift from an economy with resources in open-access to an economy with exclusive property rights,

An NHS receiving an NHRP Resolution Request MUST NOT send a positive NHRP Resolution Reply for a station which registered via ATMARP if the station sending the NHRP

While this assigned link prefix does not explicitly appear in the configuration of any specific switch, router, or host, the network administrator performing the

Although the UE is dual stack, the UE may find itself attached to a 3GPP network in which the Serving GPRS Support Node (SGSN), the GGSN, and the Home Location Register

dual-stack (IPv6/IPv4) nodes over IPv4 networks.. The main objectives of this document are to: 1) describe the domain of applicability, 2) specify addressing requirements, 3)

In an ordered root tree, vertices of the same height are linearly ordered: the vertex v is to the left of the vertex w (w is to the right of v) if, after the maximum